Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Similar Messages

  • When I export audio to movie the result is just very much noice. The problem started after installing Lion

    When I export audio to movie the result is just very much noice. The problem started after installing Lion
    I'm using latest version of Logic 9 in 32 bit

    Please - gotta bump this because I'm really desperate to get this working.
    Any help or ideas .....?

  • Itunes can't run bc of audio configuration problem

    Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
    So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
    Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

    the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    perhaps let's start with the following document:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem
    ... but if no joy there, try this alternate technique for swapping out your QuickTime:
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • Audio configuration problem in iTunes

    I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

    See if this helps:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem
    http://docs.info.apple.com/article.html?artnum=304424

  • Problems detected after updating to iTunes version 11.1.3.8

    Problems detected after updating to iTunes version 11.1.3.8 for Windows 7 Ultimate 64-bit version, Service Pack 1.
    USB connected iPhone 4 (iOS 7.0.4) is not recognised in iTunes.
    Sluggish response when starting iTunes.
    Any known remedy?

    After updating to the newest version of iTunes which is 11.1.3.8, I can no longer edit song information because whenever I click Get Info, the program crashes. It says, "iTunes has stopped working...". I literally tried all the troubleshooting techniques here but to no avail!
    I already:
    Reinstalled iTunes and other related programs like a hundred times
    Scanned my computer for viruses
    Opened iTunes on another user account
    Opened iTunes on safe mode
    Removed unusable configuration files
    BUT STILL, the problem persists. I have the same version of iTunes on my office computer and it works perfectly fine but I want my iTunes here at home to get fixed. Never had problems with editing song information until I updated it to 11.1.3.8.
    I just don't know what to do anymore. I updated this program last January 1 and until now I haven't found any solution. It's really getting on my nerves!!!

  • TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

    My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

    Eek.  Sounds like something in the app caused some serious software issues.  You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

  • A problem is after install update december 10, 2014

    A problem is after install update december 10, 2014  UAC settings says unknown publisher , troubleshooting not working, when I want to change any setting it says unknown publisher , windows defender not starting etc

    Hi
    vijay ,
    Have you tried the solution provided by
    Winword Exonar ? Does it work? Any feedback would be appreciate?
    If this is not the cause, then I would suggest you return to a previous point with system restore. or simply uninstall the updates december 10, 2014 , then check if issue persists, we should first find out whether one update included in is the culprit.
    Regards.
    Yolanda Zhu
    TechNet Community Support

  • ITunes cannot run because it has detected audio configuration problem?

    I've got Windows XP, recently did a system restore and was forced to re-install iTunes afterwards. After installation, I click the iTunes icon and get a pop up "iTunes cannot run because it has detected a problem with your audio configuration." I went to the iTunes support page and found a similar trouble shooting scheme. I applied both options and both failed. I tried re-installing again to repair, but after the repair, the problem still remains. I found a major difference in the trouble shooting scheme however and I wander if that could be it. The web page shows quick time's audio channels as "Stereo (L R)", however my quick time control panel doesn't feature that channel. Instead, there are 7 "LayoutTags" to choose from, each containing 7 digits. I'm no computer whiz, so I'm going to need help on this one.

    replying to lowriderpharaoh.
    hmmmmm. it's sounding like you've still got a damaged version of QuickTime in the PC. (or at least, there's something going wrong with the quicktime.)
    let's try swapping out the QuickTime again. we'll take a few additional explicit precautions this time.
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    Next, we’ll manually remove leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
    if it doesn't launch properly, are you still getting the unusual display effects in the QT preferences?

  • Itunes starts but fails to open due to audio configuration problem

    Hi
    I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
    Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
    No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
    I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
    Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
    Thanks
    Toshiba Satellite   Windows XP Pro  

    Hi
    Got it resolved, thanks for the prompt responses all!.
    Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
    Phew!
    Toshiba Satellite   Windows XP Pro  

  • ITunes won't start (audio configuration problem)

    Hi all,
    I have been using iTunes for a few months without problems.
    Last week, all of a sudden, it gave me an error message every time I tried to open it: "iTunes cannot run because it has detected a problem with your audio configuration".
    I don't know what happened as I didn't do anything to the controls in my computer. The only thing is that I downloaded a video from Google, and this prompted me to download the Google Video Player, now installed in my computer.
    Could this have anything to do with the audio configurations? How can I reset them to their original state so I can use iTunes? Should I uninstall the google player?
    Thanks a ton for any help and sorry for the long post.
    Juan

    This error message is usually duw to a quicktime problem, see:
    http://docs.info.apple.com/article.html?artnum=304424

  • Audio configuration problem error message

    I have just upgraded to version 7.1.1 and when I try to open it the following message appears
    i tunes cannot run because it has detected a problem with your audio configuration.
    I have tried returning to the old version, but that just comes up with the error message 200.
    I relly would appreciate any help with this

    Quick Time need to be reinstalled. Uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.Be sure to select the second option that Does Not Include iTune.

  • "Audio configuration problem" on one machine, not the other

    I have a laptop and a desktop both with Vista Home Premium SP1. I have ITunes and Quicktime on both. I can run ITunes on the desktop without getting the "audio config problem" message, but on the laptop (Toshiba Satellite A215-S5837) I have tried the fix (uninstall and re-install QT) with no luck. At first I thought the problem was fixed, but after turning the machine off and back on, the problem is still there.
    Any help?
    Thank you,
    Dave

    Unfortunately, the noir household Vista box is in a different hemisphere from my current location (it's in North Carolina), and I can't doublecheck the way that the Audio control panels are set up on Vista.
    ... but in XP, the first thing I would check on with a recalcitrant "audio configuration" error would be if the correct default device was showing up in the "Sound playback" area of the "Audio" tab of the "Sounds and audio devices" control panel.
    Can you find such a location in your Vista control panel on the PC getting the "audio configuration" error?

  • Audio configuration problem?

    ok this is one of many problems..
    1)itunes wouldnt recognize my ipod
    2)i downloaded 7.2 and now it wont open itunes b/c of some auido configuaration error..
    3)IM GETTING REALLY ANNOYED
    anyone wanna help the poor kid out?

    2)i downloaded 7.2 and now it wont open itunes b/c of some auido configuaration error..
    that's typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    the following document may be of some assistance:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • Launch failure: Audio configuration problem

    Just downloaded newest version of iTunes and get the following error message-
    'ITunes cannot run because it has detected a problem with your audio configuration'
    will not then launch.
    Grateful for any suggestions. HAve checked and audio settings do not look unusual plus can use Realplayer without any problems.
    Thanks

    This is usually a Quicktime problem rather than iTunes.
    This article usually does the trick:
    http://docs.info.apple.com/article.html?artnum=304424

  • Itunes audio configuration problem

    Ihave just upgraded to the new version of itunes and now, when I open itunes, I get a window that says "itunes has detected a problem with your audio configuration. Audio/video playback may not generate properly". I can then click through and open itunes. However, everything I have downloaded since the new upgrade has not played back properly. What do I do?

    See if this link gives any helpful information:
    http://docs.info.apple.com/article.html?artnum=304424

Maybe you are looking for