Audio Configuration Trouble= No playback!
The following statement is popping up before Itunes opens..."itunes has detected a problem with your audio configuration audio/video playback may not operate properly" How do i fix this??
I'm having the same problem - iTunes 10 uninstalled my audio driver and I can't seem to re-install it. I get no sound on anything.
Dell laptop, Windows XP
Similar Messages
-
Hi
As you can see in the attached image, I don`t have available the sound throug speaker and I can´t select it in the list of device for sound output.
Additionally, I can´t plug headphone in the minijack!! it is in only to the half of the mini-jack plug
Could you give me some advice?
TamI'm having the same problem - iTunes 10 uninstalled my audio driver and I can't seem to re-install it. I get no sound on anything.
Dell laptop, Windows XP -
ITunes has detected a problem with your audio configuration, audio/video
When i open iTunes i recieve a message saying "iTunes has detected a problem with your audio configuration, audion/video playback may no operate properly." iTunes opens fine after i click ok on the message. However when i push play to hear a song nothing happens, the time for the song remains at zero's.
This error can be caused by a bad installation of QuickTime. Remove iTunes and QuickTime, and reinstall iTunes (which will reinstall QuickTime). You can find the steps to remove and reinstall near the bottom of this article in the Apple knowledege base.
-
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,... -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
Problem with audio configuration that affects audio/video playback
Recently, when I watch video on i tunes that sound and picture to not match up. Sound seems to be on-time but the picture is jerky and behind. I un-installed my video driver and reinstalled. Problem persisted. I started my computer in safe mode and it said there was a problem with the audio configuration that effected audio/video playback. I uninstalled i-tunes and re-installed and the problem still persisted. I'm at my wits end and it is driving me crazy. Windows Vista is automatically updated so that's not the problem. Please help.
Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes for Windows: iTunes has detected an audio configuration problem
-
Help! trouble with audio configuration
Ok, so here's my story. I got a virus that supposidly was only suppose to screw up with my msn. I did a system restore, but after that, I was no longer able to open up my iTunes. It said i had an error(-200), whatever that was. So then I removed my iTunes, and reInstalled it. But I still can't open it and now it says iTunes has detected a problem with my audio configuration. So I went to my control pannel and into my audio devices and all it really is is adjusting volumes and speakers and mics, and I don't know how to fix my iTunes problem. I just want my music back! Please help!
-Jessicayou've actually got the same error here as you had before. the -200 error displays as an "audio configuration" message in itunes 7.0.2.16.
they are typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.) so let's try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now? -
When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC
Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell -
I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.
I'm having the same problem. I have downloaded Itunes again but still the same problem.
-
Itunes has detected a problem with your audio configuration. audio video playback
itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!
See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696 -
I haven't used itunes here much just been playing the songs I had on it. Now i downloaded some more songs i plugged in my Ipod touch and it's not showing up and giving me the message above (Itunes has detected a problem with you audio configuration. Audio/video playback may not operate properly. I uninstalled Itunes and quicktime restarted computer and still the same thing. What is going on?
Try reinstalling QuickTime, as this article suggests
http://docs.info.apple.com/article.html?artnum=304424
Other people have had luck with deleting their QT rpeferences file:
C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\QuickTime\QuickTime.qtp -
When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly. I removed some unused programs from my pc before this happened and I think I may have removed something I shouldn't have.
I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again. -
Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade LawrenceHello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen
Maybe you are looking for
-
Organisational Unit Authorization not getting effected
Hi gurus, I m facing problem while providing the authorization.We have an role base authorization structure.I had provided as * in organisational leve for all plants or shipping point or any org element for master roles.But when I m copying the maste
-
Retrieve the Archived Purchase order
Hello All, Please help me with transaction to retrieve the archived Purchase order. Regards Kalyani.
-
USMT - admin password for protected content
What is the deal with this prompt when doing the USMT restore state? What exactly does this do? What is the "protected content" they are referring to?
-
Photosmart 8150 not printing any documents from new install on WIN7 desktop
Calibration and alignment prints correctly from the printer panel menu but nothing else prints properly. For instance, the Print Test Page command from the printer properties and from the printer diagnostics utility result in a completely blank page
-
Hi, I am using two applications in two App servers A and B using App server JMS for cache synchronization. I have the JMS topic set up in App server A. Both the applications use this Topic for cache synchronization. Cache synchronization works fine f