Audio created in Final Cut won't play in iTunes

I created a bunch of audio files in FCP that have the .wav extension. They play fine in Quicktime (and the Finder preview), but not in iTunes.
I''ve tried to convert them in programs like Swtich and xACT, but they won't open in those, either.
According to Switch, these files have "Codec: Extensible Wave Format."
According to the VLC player (in which they do open) they have these details:
Type:                               Audio
Codec:                               pcm
Channels:                     3F2R/LFE
Sample Rate:                     48000
Bits per sample:           24
What to do? Something in Final Cut? Some other program?
I've tried garageband, too, but the audio just comes out silent.
Thanks

Itunes needs .m4a files. Go to the Share menu in FCP X and choose Export Audio. Choose AAC from the export formats. It should say M4a below the AAC selection in the Export list. Afterward you will need to get the file into your Music/iTunes/iTunes Media/Music folder to see it in your iTunes library. You might have to import the file into iTunes from within iTunes. Best wishes.
stephen

Similar Messages

Final Cut won't play sped up video

I'm trying to speed up the video to match audio, but whenever I do Final Cut plays it for about a second and then stops playing?

Well I used to just adjust it and it would play on my Mac Pro before. I don't remember needing to render the change to see the results, it would just play. I'm on a Macbook Pro now though, with the same speed drive 7200 RPM.
Is there a formula for adjusting video to the same amount as audio's BPM?
For example, if you have audio that is sped up from 105 BPM to 120 BPM, and the video matches the original 105 BPM, so now it needs to be adjusted to 120.

New iPod Touch-want to load videos created using Final Cut Studio

I'm unable to transfer movies I create on my Mac into the iPod Touch. I'm assuming all transfers to the iPod need to go through iTunes - is this correct?
I created a video in Final Cut Pro, then compressed two versions of podcasts in Compressor.
H.264 for iPod video and iPhone 320x320(QVGA)
H.264 for iPod video and iPhone 640x640(QVGA)
I then dragged them into iTunes library, thinking they would go into the Podcast folder, but instead they went to the Movie folder.
I synced to the iPod, and they fail to transfer/load. I then selected "Create iPod or iPhone Version" from the iTunes "Advanced" menu in case there was some file issue, but was unsuccessful in dragging it to the Podcast folder.
Does the iPod Touch sync up to all iTune's folders, or, is it limited to what's in the Podcast folder?
Is there a utility that exists to verify the video files are of the correct format.
Are there other steps I am missing?

NibblesNBits wrote:
I created a video in Final Cut Pro, then compressed two versions of podcasts in Compressor.
H.264 for iPod video and iPhone 320x320(QVGA)
H.264 for iPod video and iPhone 640x640(QVGA)
For anyone else in the same situation - videos created in Final Cut Pro and compressed using either of the Compressor settings will create podcasts that can be synced up and play on the iPod Touch,
The problem was the "Sync Movies" setting - it was disabled. The challenge was finding the settings, and wouldn't have been an issue prior to release of version 3.0 software upgrade notice.
The "Sync" settings were where I first looked, from within iTunes, but as I said, the device settings were being hidden by an "Apple commercial" for the version 3.0 software upgrade - once I clicked on "Remind Me Later" I was able to see the 8 tabbed configuration screen. I guess marketing trumps usability.

Importing OMF files created from Final Cut 4.5

Hi Guys,
I'm trying to import an OMF file created from Final Cut 4.5 and I'm getting a message saying "skipping audio part- edit point 190316987 too big." After I hit OK, I get thrown out of Logic 7. Has anyone had a similiar message, and if they did what did you do?
Powermac G5 dual 2 ghz Mac OS X (10.4.5)

Raffi:
This is Apple document related:
http://docs.info.apple.com/article.html?artnum=301871

Using Tascam US-122mk11 as audio interface in Final Cut Pro 7

Using Tascam US-122mk11 as audio interface in Final Cut Pro 7. Works fine with Garage Band. Final Cut Pro won't use it. It appears in source menu in Voice Over Tools, but FCP won't use it.

This is the Final Cut Pro X forum. You are using a very different application. The Final Cut Studio forum, which is for the application you're using, is here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Give exact details of your media and sequence settings. It would also be good to know what kind of drive you're using and how it's connected.

I rec'd a CD with audio files. The suffix is .v09, and they won't play on iTunes. Any idea what I should do?

I rec'd a CD with audio files. The suffix is .v09, and they won't play on iTunes. Any idea what I should do?
I have a MacBook, OS X.

No helpful information seems to be available about this, except that on Windows .v09 indicates an unknown extension - in other words they could be anything. What do you get if you highlight the file and hit command-i - does the info pane give you any file type?
The best thing would be to ask the person who sent you the CD what they are; if you can't do this you can only try opening it in various programs. Audacity is a free audio editor which can open a number of formats. You could try dragging it to a browser icon in case it's Flash, or try the Windows Media Player. However there's a good chance that it's one of the obscure audio formats, in which case you very likely won't be able to play it.

How to add audio track to Final Cut Express

Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

Creating in Final Cut and hosting on a Windows streaming media Server

Is it possible to host video files created in Final Cut Studio 2 and host them on Windows Server 2003 Streaming Media Server? If yes what format should I render the video? H.264?

hey there integron, welcome to Discussions!
it should be possible to do what you want w/ the purchase of the additional components of "Flip4Mac" to convert FCP's QT movie to WMV or AVI movie. there's more info on the license & converting @ the "Flip4Mac" 'site--http://www.flip4mac.com/
good luck.

Does the projects created in Final Cut Express transfer over to the new Final Cut Pro software?

Does the video projects created in Final Cut Express transfer over to the new Final Cut Pro software?

You want to go from FCE to FCP-X?
You would need to do so in multiple steps.
1) You would need to be working in a very late version of FCE.
2) Open the FCE project in FCP-7.
3) In FCP-7, export an XML of the sequence you wish to get to FCP-X.
4) Purchase the software 7toX
http://assistedediting.intelligentassistance.com/7toX/
5) Import the XML into 7toX, export the FCP-X friendly file
6) Import the converted XML into FCP-X
7) Re-link all you media
It should be noted that when you use XML, not all the things you have done in your original sequence will make it through the final translation. There is more information about this at the 7toX page linked above.
MtD

How to setup an artist mix (audio mixer) on final cut pro 7?

how to setup an artist mix (audio mixer) on final cut pro 7?

Hi Meatpuppet,
I'm having the same issue with not getting my audio through to the client on Ichat theater preveiew. I'm on a mac pro with a small DV camera attached via firewire. when I start the chat, the person on the other side sees and hears me fine, but then when I start sharing in FCP, the video switches so that the remote person sees the time line, but loses the audio from me and doesn't hear the audio from the time line...
The manual recommends "disconnecting and external video device" ( then what do us mac pro folks do?)
So my question for you, and I know that you're on and Apogee Duet, is: Was your tinkering in FCP, your system sound settings, or iChat? in other words, where was the disconnect?
thanks.

Will iDVD be able to recognise the chapter markers created from Final Cut ProX Ver 1.1 ?

Hi there,
It has been quite a while since I use iDVD from Final Cut Express 4 days. So, please excuse my ignorance.
Can I know whether iDVD will be able to recognise the chapter markers I created from Final Cut ProX Ver 1.1 ?
That is to say, if I share/export a file from FCPX and tick the "include chapter markers" box ...
Thanks

Ian R. Brown wrote:
I don't know but you can find out for yourself in a couple of minutes.
Make a one minute project (any old clip) and add several chapter markers.
Export it and drop it into iDVD to see whether the chapter markers are recognised.
Thanks Ian, problem is forgot how to use iDVD already ...
And i remember reading some where that iDVD cannot recognise the markers generated by the earlier version of FCPX. So I am not sure about the Ver 10.1
So I was thinking, if Ver 10.1 is still the same, I might as well no need to re-learn iDVD yet ... Hahaha
Cheers

I am not able to share final cut pro x project to iTunes. it continues to say waiting.

I have not been successful in sharing a final cut Pro X project to itunes. It says waiting.   I can cancel it, of which I have canceled about ten submissions now, but each time it says waiting. What am I doing wrong here?

I am not running a compressor.   I am running the 30 trial version of Final Cut Pro X. I have created and finished a project.
I am running a brand new iMac with the latest OS version.    First I a highlight the project to share. I assume just by clicking on it.   click share - apple devices - then i select for which machine, (imac) i want it to render it for-select add to itunes- and click share.
Then it opens up the share monitor shows the project in question and says waiting. I can pause it, cancel it but I can not get it past waiting. the time registry under the info selection says 0.00 minutes but still waiting..
I am selecting the project correctly?   I have made only one project.

I purchased a film but it won't play because iTunes says I need to authorize the computer, but when I do that it says the computer is already authorized. Huh - some system. Any ideas?

I purchased a film but it won't play because iTunes says I need to authorize the computer, but when I do that it says the computer is already authorized. Huh - some system. Any ideas?
Using Windows 7

Hey Louni,
Thanks for the question. I understand you are having issues with Authorizing your computer to play content. The following articles may help to resolve this issue:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

Videos won't play in iTunes

TV, Video Podcast, Movies - none of them play in iTunes 10.5.3. A windows pops up, you have the PAUSE button showing as if it's playing but nothing is happening, just a still shot of the video. They play fine in quicktime.
I re-installed iTunes, no luck.
Lion 10.7.2
Mac Pro

My friend sent me a music video, but it won't play in
iTunes. It is formatted so that it should play, but
all I see is white, green, and orange bars! The file
plays in QuickTime now that I changed my setting to
"Safe Mode" and also plays on my iPod, but what do I
do for it to work in iTunes!? Thank you in advance
for the help!
Windows XP
I have the same problem with the tv shows I bought last week

HD video won't play in iTunes after Mountain Lion install.

any hd video won't play in iTunes.

Hi
I have the same problem. Any solution yet? I would like to play hd videos in iTunes on my late 2012 iMac.
Take care

Audio created in Final Cut won't play in iTunes

Similar Messages

Maybe you are looking for