Audio Crosfade with shortcut

Hi I use final cut 7 for years, and now I try to work with Final cut pro X.
Is there option to select all clip in time line and put audio crosfade to entire selected clip ? I don't see this option???

Tnx Tom,
But Alex4D not working to me in 10.1?? I don't know why?
totally crazy that Apple did not put this in FinalCut X, Totally amateur. As the absence of multiple favorites for audio, video
What if I have 200-300 clips and want to put only basic audio crosfade I have to do each one individually fine-tune, totally stupid and useless, grrrr

Similar Messages

How to revert to original, the extracted Audio Tracks with SoundBooth?

How to revert to original, the extracted Audio Tracks with SoundBooth?
I have installed the Adobe "MasterCollectionSuite-CS5"-ITA with PremiereProCS5 and SoundboothCS5.
I made a few test with PremierePro Audio clips and used the option "Make a rendering and extract" with Soundbooth.
I want know, after that operation:
- Exists an option (a shortcut) to revert automatically the audio tracks from the extracted Soundbooth clips to the original audio footage?
- In other words, I want return to the original audio timeline situation, prior to make the extraction with Soundbooth. Is it possible?
- I know just one method:
Click and drag the video clip from timeline and release the clip in the "Source"Monitor window. After that I can drag the video+audio at the same start-and-end point of the source and put it into timeline, at the same place...
But with this method I loose the applied effects and transitions from the edited clips in the timeline...
Exists another method?
Thanks!
Horsepower0171.

Dear <http://forums.adobe.com/people/Shai+Schcolnik> Shai Schcolnik
After you have edited the Audio file in Soundbooth, you should:
1)      Select the Original Footage in PremierePro > Project Folder
2)      Select with RIGHT Click the Video+Audio Clip in PremierePro Timeline, and in RIGHT Click Menu choose “Replace/Substitute with clip” > “From Folder”
3)      Now you can delete in PremierePro > ProjectFolder, the named Audio File “…_Extracted.wav” edited previously with Soundbooth!
The new one is your original footage!
Best regards!
Dario Cavallo (Horsepower0171).
“3DC multimedia Productions”
www.3dc.joomlafree.it
Italy.
Da: Shai Schcolnik [email protected]
Inviato: lunedì 7 gennaio 2013 12:13
A: Horsepower0171
Oggetto: How to revert to original, the extracted Audio Tracks with SoundBooth?
Re: How to revert to original, the extracted Audio Tracks with SoundBooth?
created by Shai Schcolnik <http://forums.adobe.com/people/Shai+Schcolnik> in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion <http://forums.adobe.com/message/4973889#4973889

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

How do I get Video and Audio Chats with PCs ?: FAQ 3

How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
Applies to iChat 3.x and iChat 2.x
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
A DSL (Broadband) connection of at least an up link speed of 256kbs.
An AIM or .Mac.com account name.
(hosting Multiple person AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link.
Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
Some need the file from item 2 Here
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Nescape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here
My Web Pages
Happy Chatting.
Ralph

Hi Ralph,
Just a type, you misspelled Netscape...
An AIM account/screen name (AOL or Nescape count as well)

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

What type of connector do I need from my Macbook Pro Retina laptop for sound out to audio speakers with regular audio input jacks?

I am wanting to use regular audio speakers with traditional audio input jacks to serve as output speakers on my Macbook Pro Retina display laptop. What type of cable would I need to connect?

http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP

Audio player with some extra's - can't get player realized

I try to build an audio player with some extra's like looping between 2 time marks.
Till now i have an interface that can play back audio files but after that the problems start.
There is no way i can add functions without creating a {color:#ff0000}NotRealizedError{color}.
According to the documentation the start() method should realize (etc) the player, but it doesn't in my program and neighter does the method player.realize();.
Can someone give me a hint to get me on the road again.
Thanks in advance.
Here is the complete code which generates the NotRealizedError on the dp.setRate(); method:
(most of it is older source from a basic player on the internet).
package dictaplayer;
import java.awt.*;*
*import java.awt.event.*;
import java.io.*;*
*import java.net.MalformedURLException;*
*import java.net.URI;*
*import java.net.URL;*
*import javax.swing.*;
import javax.media.*;
public class DictaPlayer extends JFrame {
private Player dp;
private URI uri;
private URL url;
private boolean realized = false;
public DictaPlayer()
super( "Testing DictaPlayer" );
JButton openFile = new JButton( "Open file to play" );
openFile.addActionListener(
new ActionListener() {
public void actionPerformed( ActionEvent e ) {
openFile();
createPlayer();
getContentPane().add( openFile, BorderLayout.NORTH );
setSize( 300, 300 );
setVisible(true);
private void openFile()
File file = null;
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode(
JFileChooser.FILES_ONLY );
int result = fileChooser.showOpenDialog( this );
// user clicked Cancel button on dialog
if ( result != JFileChooser.CANCEL_OPTION )
file = fileChooser.getSelectedFile();
try {
uri = file.toURI();
} catch (SecurityException e) {
e.printStackTrace();
// Convert the absolute URI to a URL object
try {
url = uri.toURL();
} catch (IllegalArgumentException e) {
e.printStackTrace();
} catch (MalformedURLException e) {
e.printStackTrace();
private void createPlayer()
if ( url == null )
return;
removePreviousPlayer();
try {
// create a new player and add listener
dp = Manager.createPlayer( url );
// blockingRealize();
dp.addControllerListener( new EventHandler() );
dp.start(); // start player
dp.setRate(2);
catch ( Exception e ){
JOptionPane.showMessageDialog( this,
"Invalid file or location", "Error loading file",
JOptionPane.ERROR_MESSAGE );
private void removePreviousPlayer()
if ( dp == null )
return;
dp.close();
Component visual = dp.getVisualComponent();
Component control = dp.getControlPanelComponent();
Container c = getContentPane();
if ( visual != null )
c.remove( visual );
if ( control != null )
c.remove( control );
private synchronized void blockingRealize() {
int teller = 1;
dp.realize();
while (!realized && teller <= 20) {
try {
wait(1000);
System.out.println("not realized " +teller);+
+teller++;
} catch (java.lang.InterruptedException e) {
System.exit(1);
public static void main(String args[])
DictaPlayer app = new DictaPlayer();
app.addWindowListener(
new WindowAdapter() {
public void windowClosing( WindowEvent e )
System.exit(0);
// inner class to handler events from media player
private class EventHandler implements ControllerListener {
public void controllerUpdate( ControllerEvent e ) {
if ( e instanceof RealizeCompleteEvent ) {
Container c = getContentPane();
// load Visual and Control components if they exist
Component visualComponent =
dp.getVisualComponent();
if ( visualComponent != null )
c.add( visualComponent, BorderLayout.CENTER );
Component controlsComponent =
dp.getControlPanelComponent();
if (!realized) {
System.out.println("not realized.");
if ( controlsComponent != null )
c.add( controlsComponent, BorderLayout.SOUTH );
c.doLayout();
}

captfoss,
Thank you for your comment.
captfoss wrote:
Start does realize the player, automatically, before it starts it... if it isn't realizing then it also isn't starting.Right, I thought so, but my test was wrong. I now tested it with getState() and I can see it's going from unrealized to realized.
First off, you can only call setRate on a player that is realized but not started... further, any of the calls like configure, realize, start, stop, etc... are non-blocking calls...so you have to wait for them to finish before you go on to the next step.So you say that when the rate is changed (f.i. by a user in a gui) the program first has to bring player in non-started realized mode (stop + realize), call the setRate() and start the player again (on the exact position it was stopped)?
The easiest solution would be to use Manager.createRealizedPlayer rather than Manager.createPlayer...Didn't find out yet why, but when i change this (only this), there is no playing.
Also, ++teller++ is about the most-confused looking code I've ever seen...Just like all the asterisks, i now know that code changes when i toggle between the tabs (rich/plain/preview) in the message box.
Beyond that, your "blocking realize" function doesn't appear to do anything except suggest you have no business coding anything this advanced. Your boolean value "realize" isn't ever changed, so, I'm not entirely sure what the point of that function is other than to wait 10 seconds.I got this somewhere from the internet. Thought it could help me realize the player, but it didn't (obvious) so i commented it out.
Slowly I begin to understand the basics of JMF (at least i think so), but I also understand that there are other (Java) ways to build the application I need. Unfortunatly I have to little (hardly any) knowledge of all those (sound) API's (f.i. JLayer) to find my way through them and to decide which is the best for my use (user controled audio playback (at least WAV and MP3) with looping possiblities between 2 marked positions).
If someone could give me an advise which API (method or whatever you call it) is best to focus on I shurely would appriciate that.

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

1,000 menu items - each selection plays unique audio clip with same video

Hi all,
We're familiar with playing different audio tracks based on a menu selection - but we have a large number of clips for this project... so, here's our question:
A viewer of our 30 minute dvd throws it in the player and selects the city they live. We want to have about 1,000 city names they can choose from.
Based on their selection, (eg: Los Angeles) the DVD will play and then at 7 different points during playback, we need the name "Los Angeles" inserted/played along the main audio track. If someone selects Portland, then Portland would be spoken in that spot instead, etc.
In terms of audio files, we have the one main audio that is the same for all menu selections, except for the spots where the city goes, it is just blank.
We have recorded 1,000 unique audio clips of just the city name we want to include . (1 to 2 seconds long)
What's the best way to insert the audio where we need it during playback - or is it even possible? (non-blu ray). There is audio just before and after the point where the city name has to go, so the timing during playback is critical. (no pause or hiccup when inserting.)
We thought about outputting 1,000 unique audio tracks (each 30 minutes long) that include the full audio along with the city, but we seem limited in the number of audio tracks on the Encore timeline (at least based on our limited authoring experience - is there a way to get more clips in encore beyond the # of audio tracks it allows?)
In reading other posts, it seems we can set markers along the main audio track, dump all our city clips on a handful of audio tracks and have them pull in where needed but it seems it will cause the dvd to pause when doing this, and make for an interrupted viewing experience. Is that true?
Any ideas/thoughts are greatly appreciated...
kay

Let's see if someone can tell us how this might be done, but I say the answer is "no."
First, DVDs are made for playing on TVs as programs, not as interactive media. You pick one audio track, and that is all you get. To do what you want (the main audio track with one of a thousand names spoken also), you need a thousand audio tracks.
Even if it were possible, I think the number of menu choices (max 36 buttons on a single 4:3 menu) and the max 1 gig of menu on a disk, and if not those, the max 99 vts per disk (and for Encore which uses 1 vts per timeline, a huge task to figure out how to make all those clips into chapters on timelines) etc.

Work flow for syncing separate Audio files with Video files in FCP

It may be too late for me to use this workflow that I want with my current project, but I need to figure out what it is anyway for future reference.
Right now I'm editing a movie which is near completion. When we recorded the movie, the camera's deck recorded reference audio from the sound guy at 48k @ 16bit. This audio also went through an additional set of preamps which added a small amount of noise. So we don't want to use the reference audio because of it's low resolution and less clean audio. The sound guy recorded straight to his deck at 48k @ 24bit, besides the better resolution, his audio is noticeably better.
The camera deck and 'clapper' (I think that's what you call it) were not connected or synced. So the video files and the soundsguy's audio files are slightly different lengths, but at least have a 'clap sound' to manually sync to. And I don't mean that the audio and video files won't play in sync with each other, I mean that the soundguy always started recording before the camera, so his audio files have slightly different start and stop times.
Could I have synced the audio files with the video files before I started editing this project? If so, could it have been in the way that the soundguy's audio would be connected to my video files while editing? What would that procedure have been?
My current workflow right now is I have my finished sequence, I change the bit rate to 24 in Sequence Settings, and start manually dragging the soundguy's files to the sequence for every little edited clip. This is going to take forever, there are 99 scenes in this movie. Anyway, at the end of the day these sequences are exported as .omf files and imported into Pro Tools for audio post production.
I was not thinking to figure this out before I started editing the movie, this is unfortunate, a newb move in a decent production.
Anyway, I don't know if there is a standard for this situation or if I just opened up a can of worms for many possible workflows. Please comment if you have experience in this area or please refer me to any reading material.
Thanks for your time!
-Monty

The normal workflow (besides manually syncing up before editing!)
is to have ' some ' way of auto syncing the clips.
So you must have common timecode.
With external audio, you can slave the cam's TC to the TC output of the BWF recorder.
Then you can use BWF / QT merge (one of my apps) to sync them, or use Sync 'n Link.
(another third party application)
If it is not possible cause you're shooting with a cam without a TC input, you can record the TC output on one of the audio tracks of your cam, and use FCPauxTC reader to decode the beeps and translate that to QT TC, and again use the former tricks to sync them.
It is difficult when you have never done it, but very easy once you get the hang of it, and it saves a huge amount of time to do it right from the start.
Have a look at the FCP aux TC reader here:
http://www.videotoolshed.com/?page=products&pID=26
Sync 'n Link can be found here:
http://www.assistedediting.com/Sync-N-Link/
/// disclaimer, i AM the owner of Videotoolshed, and i WILL (at least try) to make money on it. ///
/// i do NOT have any relation with AssistedEditing.com, besides friendship with the owner. ///

Is it possible to process audio tracks with compression, eq, etc....in Logic Express, similar to the way you can do it in Protools? If so, how do you do it?

Is it possible to process audio tracks with compression, eq, etc....in Logic Express, similar to the way you can do it in Protools? If so, how do you do it?

Hello,
Yes, add such effects using the insert slots on the track strip.
Click on the slot, choose your plugin from the list. Double click to bring up its control window to set parameters.
Alastair.

Audio Crosfade with shortcut

Similar Messages

Maybe you are looking for