Audio cuts in and out on iPhone 4S

I have an iPhone 4S (16 GB) that is on version 6.0.1.  My problem has to do with sound cutting in and out when listening to music, using apps or watching videos (audio never cuts out on actual phone calls).  The issue happens both when I'm streaming online and using local programs (like apps or iTunes).  The music plays anywhere from 15 to 45 seconds, then the audio cuts.  The volume bar disappears and the iPhone pauses the muted music 3 to 5 seconds after.  If you hit Play again, it works for about 3 to 5 seconds before cutting again and automatically pausing.
Is anyone else experiencing this issue or have heard of it reported?  I noticed this issue on my device four days ago.

Hey Fitz,
I was just in to the Apple Store to have the same issue looked at for my iPhone 4. Audio cutting in and out across programs, headphones or not, with the volume bar dissapearing when the problem occurred. Turns out its damage to the audio processor (evidently located near the speakers). Can be from water damage, wear and tear or as simple as dust. I had to replace mine outright, but the employee was saying sometimes they just need a cleaning. Worthwhile having it looked at.
Sorry there isn't an easier fix!

Similar Messages

  • I have iTunes version 10.7.0.21 for Windows 7.  It was working fine untill recently.  Now when I play a T.V. show the audio cuts in and out, the video pauses intermittenly and also intermittenly fast forwards.  What is causing this and how do I fix it?

    I'm having problems with video play back in itunes 10.7.0.21 for windows 7.  Video was playing fine, but now I'm having audio issues.  Audio cuts in and out.  Also video pauses and fast forwards.  Does anyone know what would cause this all the suddenly?  More importantly does anyone know how to fix this?

    All sorted now. Thread can be closed!

  • Mac Mini 10.7 external hdmi audio cuts in and out

    I have the newer mac mini, have had this one and another one previously setup on my samsung TV through hdmi then fiber to polk audio soundbar has been working fine on 10.6.  I upgraded to 10.7 and now the audio cuts in and out.  When i go to audio and set it to internal speaker it works fine.  I didn't have any issues before the upgrade.  I did swap the hdmi cable with the one from my ps3 since it isn't cutting out, and it still cuts out on the mac running 10.7. Ideas?

    Same issue here, and same fix. PRAM reset... twice! I actually held it down TOO long and it tried to prompt me to reinstall my OS which scared the crap out of me, but I just clicked the "reboot" button on the setup screen and it booted fine. Audio problem gone. Thanks!

  • AirPlay Audio Cuts in and Out

    I have had major issues in the past six months with the audio from my AirPlay where there used to be none. For a long while I used an elaborate setup from my 2nd gen AppleTV, to a optical audio out to a quarter inch converter to an AudioEngine wireless dongle to my receiver with flawless results between 2013 and late 2014. When problems started occuring I naturally figured it was the wi-fi network, I did some serious reconfiguring to get as strong and clean of a wi-fi signal as possible, still had the issues. I finally decided to simplify the whole setup to an AirPlay compatible Denon AVR-x1000 stereo that hardwires to my wireless router. All was good for a week, now its worse than ever, even resetting the internet and the router will not seem to get the AirPlay from cutting in and out. I have an iPad, an iPhone 5 and a Macbook Pro, and an AppleTV all connecting to the receiver. All have the same cut in and out problem that existed before the receiver and after. It seems every update makes things less stable not more. Is there someone who can help walk me through a fix or just tell me AirPlay no longer works so I can stop trying?
    Please help!!!
    Here is my setup -
    Macbook Pro 15-inch, Mid 2012 - 2.6 GHz Intel Core i7, 8GB RAM Running OS X Yosemite 10.10.3 connected by Wi-Fi
    Denon AVR-X1000 AirPlay enable receiver connected directly to router via ethernet
    Netgear Dualband Wireless-N Router WNDR3700 - 2.4GHZ Channel has a 92% Signal and the 5Ghz has 85%
    Internet Connection is fast and consistent 72MBps Down 10 Up
    2nd Gen AppleTV connected via Wi-Fi
    iPhone 5 iOS 8.3
    2nd Gen iPad running iOS 8.2
    I have shut off bluetooth on anything that has it to avoid interference. The video of the appleTV works just fine and the Airplay Icon is consistently available, this is an AUDIO issue.
    ***There is another 2nd Gen Apple TV in a separate room (weaker signals all around) connected to the same network that works flawlessly streaming audio and video from any device.***

    Hello Mikeh42,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with AirPlay please follow the steps listed in the article linked to below.
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    Take care,
    Alex H.

  • Logic Pro X Audio cutting in and out

    When I am trying to record in Logic Pro X the audio seems to cut in and out at random points.
    I have a MP3 track that I am recording to and it just randomly cuts out. Even when just playing that track by itself the same thing happens though never at the same spots. If I open the MP3 in Itunes or Quicktime there is no problem with the track.
    As this seriously messes with the time of the piece and makes the recording long and painful I need help.
    Is there some type of connection I am missing? I am using an old Presonus Firebox as an Interface, it unfortunately has adaptors to take it from firewire to thunderbolt. Recording into a 27" Imac that is very souped up and shouldn't have any problems until I hit a hundred tracks or so and I am only trying two.

    It's most likely the Fusion drive, one of the symptoms is audio cutting out.
    There are several related threads in this forum regarding audio problems with the Fusion drive.
    This thread alone would take a couple of days to read.
    https://discussions.apple.com/message/24709429#24709429
    A fix is supposed to be coming in the next operating system update.

  • Optical digital audio cuts in and out

    I am connecting my new Apple TV 2010 to our Bose Lifestyle 28 (Apple TV HDMI to VS-2 and Apple TV Optical Digital to the Bose Lifestyle). After power cycling the Apple TV the audio works but cuts in and out every few seconds.
    All thoughts appreciated.
    Thanks in advance, Jay

    Even after switching DD to "On" switching cables and ensuring that I was playing back audio content with DD encoded audio, I still receive no DD audio and continue to get audio drop outs.

  • Digital Audio Cuts In and Out

    I have an earily 2009 Mac Pro hooked up to my Onkyo TX-NR3007 via digital audio (optical TOSlink). When I play a movie or music it cuts in and out. Maybe 30 sec of sound than nothing for a few seconds then sond again. I have tried 2 different cables. It is not the media because it does not happen in the same spot twice. I have also tried a differnet opt in on the receiver with the same results. I'm running up to date OS 10.7.5,
    Please help I've tried everything I can think of...

    Even after switching DD to "On" switching cables and ensuring that I was playing back audio content with DD encoded audio, I still receive no DD audio and continue to get audio drop outs.

  • Audio cuts in and out on burnt DVDs

    Hello here is my problem, I hope someone can help me because I'm already behind my deadline for this project.
    I exported a Quicktime movie (version 7) from Final Cut Xpress and imported it into iDVD 4. When I preview the movie everything is fine. When I burn the DVD most of the movie is good except at near the end the audio cuts out completely and then returns several minutes later.
    The audio is fine when I watch the QT movie. When I burn a DVD then it cuts out.
    I've tried a few times with different settings and the same thing happens at the same moment in the movie. I tried burning just the troubled section of the video to DVD and it had no audio either.
    Why would this happen? Why is it all good when I preview the DVD in iDVD but then goes to **** after I burn it? If the source file seems intact when I view it in QT then where is the problem?
    I have a stack of coasters from burned dvds all with the same problem at the same place.
    What am I doing wrong?

    What was the source of the content you assembled in FCX?
    The audio is fine when I watch the QT movie.
    Is it a self-contained movie or a reference movie? (a self-contained movie will be many MB in size while a reference movie is just a few KB.)
    Why is it all good when I preview the DVD in iDVD but then goes to ** after I burn it?
    It's because the preview function of iDVD just runs your source material so you can see if things are linked in the way you want. If the original files played in QT, they should play in preview.
    I tried burning just the troubled section of the video to DVD and it had no audio either.
    Open the movie clip of the troublesome video in QT player and do: Window>Show Movie Info
    What do you see for video and audio formats?

  • ITunes 9.0 audio cuts in and out sporadically

    Installed iTunes 9.0 recently and haven't noticed this problem before but when browsing on the web, navigating directories within the hard drive, etc., the audio cuts out briefly intermittently.
    I thought this might have to do with running too many programs at once with 4GB of RAM but even if I scale back on programs running, I do not notice any difference. I recently installed Norton 360 and thought that might have something to do with it but not sure.
    I don't notice the audio cut out like that anywhere else.
    Anybody else notice this?

    I don't have my iPod docked when I have this problem. Downloaded 9.1 today, thought it might help. No. It's as bad as before.
    My system is good, no defrag needed. Though I like to run that every so often. Like spring cleaning for the computer, even if it doesn't need it, heh.
    Looking for something else to use to manage my music, since iTunes won't cut it anymore.

  • Just used my FaceTime for the first time, and my audio kept cutting in and out.? Why is it doing that? Or what's causing it? HELP!

    I tried facetiming for the first time and my audio kept cutting in and out.. WHY!? It was so annoying. Does anyone know what might be the problem? Connection? Thanks!

    Do you have a Corp. Exchange account on your phone? I ask, because the requirement to encrypt an iPhone backup can be enforced by a profile installed on your phone when setting up the Exchange account.

  • I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone?

    I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone for some reason but for 2 years previous it could no problem?  tmobile says it is a problem with my phone and not their service.
    Any ideas what to do?

    I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
    If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414).  You will be given the option to restore to that backup at the end of the restore process.  Your messages are stored in the backup so restoring to the backup will return the messages to your phone.  Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

  • Audio Is Randomly Cutting In And Out In Playback

    I have encountered this problem on all recent Premiere projects I've worked on with a variety of audio types. My audio is cutting in and out in a seemlingly random way while the video keeps running fine. Sometimes the audio will play fine for 15 seconds then stop, sometimes it stops and starts after about 2 seconds. I have tried adjusting all of my preferences, settings, audio types, and even video types but the problem always comes back. Spoke to a friend who's new to Premiere and he's having the same problem. Considering moving back to FCP despite the weak interface.
    Currently I am editing Canon 5d Mkii footage at 1080p, 29.97 fps. I am using none of the audio attached to the video clips - only editing to a separate m4a music track. My audio is at 44100 Hz. I am playing back video at 1/4 quality. I am running a fully updated Mac Powerbook with a 2.6GHz Intel Core i5 and 8gb of RAM.
    Please help, almostly completely unable to edit. Thanks.

    I am still having the same issue in Premiere CC 8.0.1 (21)
    Exact same issue as the original poster on this thread, as well as the original poster on this other thread:
    Premiere Pro CC Audio Cuts Out
    So this audio issue persists from version 7 now in version 8.0.1!
    For me, audio is cutting in and out randomly and never in the same place. If I have multiple audio tracks on the timeline, then one or more tracks might drop-out at the same time. Sometimes all tracks drop out at the same time. It seems completely random.
    I am editing with a combination of P2 footage and DNxHD 290 footage. (I originally had some AVCHD footage, but then I transcoded all of it to DNxHD 290 -- but this did not improve the audio issue at all.)
    Two of my audio tracks contain the native camera audio (stereo); 1 track has the music bed (stereo .wav files) and 1 track has sound effects (stereo .wav files)
    In one of my projects, I had a very strong reverb effect applied to the track (not to the clip). When the audio dropped out, I could still hear the tail of the reverb. This leads me to conclude that it's not the entire audio track that is muting -- it's definitely the source audio clip that's dropping out. The reverb tail continued after the audio dropped out.
    Playing the same part of the timeline again produces randomly different results -- audio might drop out on a different track, or at a different time, or not drop out at all.
    This bug is making it nearly impossible to edit! I have filed a bug report at http://www.adobe.com/go/wish_fr
    During timeline playback, my CPU utilization never goes above 15% and at least 12 GB of RAM is staying free, so I am pretty confident these drop-outs are NOT caused by lack of computer resources. Also, my hard drives seem to be fast enough to play back 4 streams of HD simultaneously, but I am getting these audio drop-outs when playing back 1 stream of HD plus 4 channels of audio. Therefore, I don't believe this can be a hard drive bandwidth issue.
    System specs:
    Windows 7 64 bit, SP1
    RAM: 24 GB
    CPU:  Intel Xeon X5680 @ 3.33Ghz (12 threads)
    VIDEO:  NVIDIA Quadro 4000

  • Having a problem with iphone 4S. Phone calls are getting dropped and cutting in and out.

    I seem to have very little or no service at all recently.
    All my calls are cutting in and out or hanging up in the middle of a conversation. I have to stand in the corner or my kitchen to get a clear call or get at least 2 bars.
    I called Verizon yesterday and tried a few things they suggested but nothing worked.
    I dont have another phone to call them back on since they suggest we call from a different phone until the late evening. Someone was supposed to call my back and never did.
    Not sure on what else to do.
    I am extremely frustrated and annoyed that I cant even really use my phone.
    HELP

    If the on/off switch does not work, that is a hardware problem. The other problems may be related to a hardware problem or faulure as well.
    Make an appointment at an Apple store if there is one nearby to confirm.

  • Sound cutting in and out on Macbook Pro 15 (original) when waking display

    When I wake the display from sleep, any audio that was playing when the system went to sleep - or rather, the display went to sleep (ie: pandora, QT movie, etc), immediately starts to cut in and out and gets glitchy. This happens as soon as I move my mouse and get the dialogue box to enter my un/pw to wake from sleep. The only way to resolve it is to quit the application putting out the audio, and then open it up again. Once I do that, the problem goes away.
    Currently running 10.6.2, but have had this problem since upgrading to Snow Leopard. I've searched the forums and can't seem to find any answers. There are a lot of vague sound issues with MBP and this is a hard one to "sum up" in the subject line. Any help would be appreciated. Thanks.

    I've searched the forums and can't seem to find any answers.
    Not even quitting out the audio application prior to letting your computer sleep?
    Not sure what you have already tried from searching the forums. If you have Applecare, give them a call or take your computer to an Apple store. Let the Geniuses there check it out.
    Message was edited by: CMCSK

  • TS3367 FaceTime sound is cutting in and out

    Since updating to os7 the sound on FaceTime calls is cutting in and out.  I'm on iPhone 5 and the other person is on iPhone 4 , the other persons sound is fine.  This only began when I updated to the new operating system.

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

Maybe you are looking for

  • CAIN BSX 3000 not possible

    sir i wish to explain u entire situation in detail as :- In OBYC transaction key BSX it is already defined valuation modif.=0001, valuation class =3000 , account =24340000 .Yet in tcode MIGO i am getting error '' Account determination for entry CAIN

  • Calling web service from portal

    Hi I have created a webservice to RFC scenario in XI. Now I need to access this webservice from enterprise portal. how do i inlcude this web service in the portal. I want to use ABAP web dynpro. thanks sankar

  • How to batch convert RGB images to CMYK

    Hello, Can anyone explain in a step-by-step way how to batch-convert many RGB images to CMYK? Thanks in advance

  • Merging two roles

    Hi I have created two roles under each role i have created one folder and under each role. and i have added to pages under each folder. X Role --> New_Folder ---> Page1,Page2. Y Role --> New_Folder ---> Page3,Page4. How to merge with both roles from

  • Lotus Notes Portlets in Arabic

    I am encountring a problem with Lotus Notes Portlets, I want them to dispaly in arabic. Note: they are running very good in English I used the propertyResourceBundle way, and it indeed retreives the strings from the correct file -LotusBundle_ar.prope