Audio De-Sync during Capture in Final Cut Express

Hi, I use Final Cut Express HD and have recently come across an unusual problem. When capturing footage I find that around five minutes in or so the video freezes for a few moments. After the footage has been captured the audio now goes out of sync at the point the video froze, lasting for the remainder of the clip. I've tried different settings in the easy setup but the problem persists. I only got this new mac recently and the problem happened right after I installed it.
The only changes I have made to the set up was that I moved the folder that all of the footage/renders etc. to another part of the mac, which cFinal cut made me reassign in it's menus. Could this be the cause?
I do a lot of work in Final Cut and this is a large problem for me. Any help at all would be greatly appreciated.

If you have been altering the Easy Setups a lot you may have corrupted the preferences.
So trash them completely like this
Misc1 Trash Prefs
Then set the correct Easy Setup.
If you are not sure which to use let us know exactly what video format you are using.

Similar Messages

Issues Capturing with Final Cut Express

Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD

Panasonic HDC-SD100 media card unable to capture on Final Cut Express 4

No problems at all with transfer to i-movie but just purchased final cut express 4 and problems with capturing from the media card. Signal system on camera is 1080/50i. Have tried setting HD and 1080/50i in the easy set up but no joy. Have tried log and transfer and see clips but on transfer message states no data. Can anyone help with the settings please?
Many thanks in advance

Welcome to the forum!
There are many things that could cause this, and almost all have been discussed.
Some things to try:
• In the Log and Transfer window, click the preferences button (the gear in the upper right). Make sure audio is set to *Plain Stereo*
• Also in that preferences window, click the button to *Clear the Cache*
Also, what drive are you using to capture to (internal or external)? How is it formatted, and how much space is left on that drive?

Real-Time Capture in Final Cut Express

Hi All -
I own a music venue, and we're considering adding video recording services (current we just offer audio). To reduce labor, I'm planning on a fixed mounted camera (brand/model TBD) from one of our lighting trusses (on the ceiling). We'd like to stream the video footage into a PowerMac and/or PowerBook in real time (presumably via a long firewire cable), thus avoiding the use of tapes, etc... So two questions:
1- Can Final Cut Express handle direct capture of video in Real Time? If so, are there any constraints, such as 7200 RPM harddrive, no HD, etc..., that I need to be aware of?
2- We plan to capture audio separately so that we can mix it in 16-track format in our ProTools HD studio. Will FCE work with a time code (SMTPE, etc...), or are there other prefer methods of keeping the sources in synch?
Any other thoughts from concert film masters would be appreciated! We're a small venue (150 person capacity) and will be using this mostly for student recitals and local bands - thus we need to be frugal and minimize the number of people needed to run it.
Thanks!
Raja
Red House Studios
www.redhouselive.com

1. There are limitations to the length of FireWire cable data can be streamed. You might want to check up on this. FCE captures DV in realtime. You'll need a fast drive either in the computer or an external FW drive at least 7200rpm with 8MB cache.
2. No.

Trouble capturing to Final Cut Express HD 3

Upgraded to Leopard last night and also added Final Cut Express HD 3. I have been using Final Cut Express for about 4 years and using my Canon XL1 & GL1 to capture with no problems. After upgrades I hooked up my Canon XHA1 (firewire)
and wanted to capture some HD footage to play with the new stuff.
When I go to capture (using capture screen control buttons), the camera starts and the capture screen stays black for about 5 seconds then stops camera. VTR at bottom of screen is showing connected. I've tried many things with no results. played with camera settings. Need some help.

Do a forum search for QuickTime 7.3. It doesn't work with FCE versions 3.5 or older.

Capturing into Final Cut Express

I work within Final Cut Express and up until now i was capturing footage via a sony camcorder with a firwire connect.
But i have just recently bought a panasonic gs 500 which comes with a usb cable connection. So i plugged it in, opened Fianl Cut and it doesnt recognise the camcorder being attached? I know the camcorder works with Final Cut, so i wondered if it is because i need a newer version of Fianl Cut to work with usb connection, or that i will need to buy a firewire cable for my camcorder? Any help would be great, want to get capturing footage.

Most camcorders that I've encountered don't come from the factory with a FireWire cable - you have to supply your own. A USB cable is usually included to transfer stills, not video.
Again, FCE captures via FireWire, not USB. Beyond that, USB cannot sustain the throughput required for video. Even though the USB2 spec appears to be faster than FW400, that's simply not the case in real life. The explanation involves the electrical, signalling & protocol characteristics of USB vs. Firewire.
USB cables (esp. the cheap ones packaged with cameras) are much less costly than FireWire cables. We might like the manufacturer to bundle a FW cable with the camcorder, but the manufacturer sees that as an unnecessarily expensive accessory.

Can you batch capture with Final Cut Express?

I'm new to Mac and FCE,
I'm used to running through my dv marking in and out points to create a batch and then hitting capture at the end and the computer rewinds and captures each in/out point. At this point, I usually start editing pics, etc for the video on another machine (videos are very short turnaround time).
Is this type of batch capture possible with final cut or does the user actually have to wait while the video is captured or better yet go to the end of each out point only to have the tape rewind for each clip captured. Seems like a very inefficient way of doing, so i'm guessing I am just unaware of how to do it. Please give me the steps if possible and of course all help is much appreciated.
Thanks,

This is very irritating. The more I get into the Mac side of video the more I think I have been sold a bill of goods. Mac seems to be good for lots of stuff, but I have to say that iMovie and Final Cut Express seem to lack some pretty basic functionality found in Windows software like Ulead MSP.
I even asked this specific question to the Apple store personnel and they guaranteed me that batch capture is possible on FCE.
I have to ask myself at this point why am I considering paying 900.00 for FCP when a 300 dollar Windows Program does the same thing. I guess live and learn, but it sure helps when people tell the truth and don't make stuff up when they don't understand it.
I am very disappointed at all the Mac video hype I have yet to see the wonders.
Thanks for the reply,

How to convert MTS files for capture in Final Cut Express 4

*PLEASE HELP!!!* While waiting to buy my iMac I saved my Canon Vixia HF200 AVCHD video clips on a PC with backups stored on an external HD. I transferred these to my iMac and they are in .MTS format. I can not open them in either iMovie or Final Cut Express 4. I gather I need to convert the files somehow. What is the best way to do this? _Thank you for your help!_

Here are your options now that you just have the files...
http://discussions.apple.com/message.jspa?messageID=9966355#9966355
http://discussions.apple.com/thread.jspa?threadID=2073767&start=15&tstart=0
As Tom said, next time import directly from the volume rather than copying the .mts files.

Audio isn't being captured through final cut

Alright well I just captured a couple of clips using a Panasonic DVX 100-B through a firewire, and the video gets captured but the audio doesn't
Help much needed thank you

Also when I capture it in Final Cut it plays audio but when I open it with QuickTime no audio????

Trouble capturing on final cut express hd and imovie

I am having trouble capturing media in fc express as well as imovie. my footage is HD. when I start to capture the media goes in normal for like 2 seconds, then it says that the capture is 95% behind(in fc express) or that it is capturing at 1/8 speed (imovie). even when i stop the capture in order to let it catch up to real time,the media freezes up so that i cant really view it. i dnt know what i am missing.Ive even tried to use a different firewire cable. any suggestions?
Message was edited by: sscstudios
Message was edited by: sscstudios

Thanks for the reply Tom. (BTW I'm not the original poster.)
You are correct- It is a USB drive formatted FAT 32 . After my original post, I erased the drive and started over with a clean slate. This was successful for tape one (about 60 minutes). About twenty minutes into tape two though, it was deja vu all over again. FC froze, I force quit, and lost all of what I had captured from tape one in the process. I unsuccessfully tried to recapture tape one. Same problem again.
Although this is the first time I've tried to capture through FC onto an external drive, I've got three other USB drives full of video I've captured from VHS with the same computer through a DV encoder. When you say USB is not supported by Apple for video applications, does that mean video editing applications? As for complete information, apologies but I'm not exactly sure what other info. you mean. Please let me know. Thanks again. I appreciate the time.

Rip Audio From Final Cut Express

Is it possible to rip audio from an MPEG Video in Final Cut Express and save a copy of JUST the audio file as .mp3? I know you can do this with QT Pro, but I'm going to be getting Final Cut Express down the road and I need to be able to do this. So I will just get FCE now if it can perform this function and not waste money on QT Pro.
Thanks!
A

Well, there's all kinds of flavors of 'MPEG Video' out there, knowing what you're using would help.
QuickTime Pro can do this, and it's not a waste of $20 to get it.
You can also use MPEG Streamclip to extract the audio to AIFF, then use iTunes to convert to MP3 if that's what you really want.

Dropping an audio track onto a PSD file imported into Final Cut Express

I created a credits page for my video in Photoshop and then imported it into Final Cut Express (Version 1.0). I then duplicated part of an audio track from another sequence (My friend's father playing the organ), and dropped it onto the Photoshop credits sequence. It displayed and played nicely in Final Cut Express, but did not create an audio track which was visible within Final Cut Express. When I exported the sequence as a .mov file and then imported that into iDVD, it also displayed and played correctly in iDVD. But when I burned the DVD, there was no longer any audio with the credits. Any suggestions?
iMac Mac OS X (10.4.5)

Thanks so much for your response. I selected and copied tracks A1 and A2 from one sequence and then pasted them into the credits (Photoshop) sequence. No audio tracks appeared in the Photoshop sequence, but we could hear the audio when we played the Photoshop sequence.
There was video associated with the original organ track, and we did not lock off the video when we dropped it into the Timeline, although there didn't seem to be any problem with the video. We did not Mixdown the audio either, although no audio tracks were displayed in the Photoshop sequence. I will try both of those things and see if it makes a difference. Thanks again.
iMac Mac OS X (10.4.5)

Run Final Cut Express through Apple Remote

I am trying to capture a lot of video clips and to do that I have set up a couple of Mac Minis with tape decks connected and want to run them from one work station through Remote Desktop. Trouble is the Mini won't run Final Cut Express unless a monitor is attached. It does not recognize the video card being installed without the monitor. Is there a solution I am not seeing? Any ideas would be welcome.

We shoot hours of video everyday on mini dv camcorders. The tapes are then captured via Final Cut Express to a G5 Mac Pro connected to a dv deck with firewire. Clips are then mpeged and stored on a server for everyone to use in their research in the office. The tapes are about an hour each and I want to capture more than one at a time without setting up a bunch of workstations for one person to man. I want to have three or four decks connected to three or four computers all running Express and I want to operate those computers through Remote Desktop without monitors on those computers. This all works, I have set it up and done it with a couple of G5 Mac Pros but when I bought a Mini to save space and cost the Mini will not open Express without a monitor connected to it. Is there an easier way to capture video than I am thinking. I welcome any advice.

Final Cut Express: No audio when capturing from camcorder

When capturing video from my "Sony TRV 18" digital camcorder and a Canon ZR500 digital camcorder
into Final Cut Express 4.0.1 via fire wire to my scratch disk - a LaCie external hard drive -
I get the video in my browser but it has no accompanying audio.
When I move a captured clip from the browser to the viewer and time line, the video shows up, but (1) there is no accompanying audio shown in the audio time line, (2) no audio can be heard and (3) the audio meters show no action.
My Easy Setup settings for audio match my camera audio settings.
I've used different firewires between the camera and the scratch disk. Still the same.
This has been a problem for about a month. Everything worked fine before. To make project deadlines, I have worked around this anomaly by capturing clips in IMovie 4 on my older Mac laptop than transferring the media clips to my Final Cut Express scratch disk. That works, but it is time consuming and requires rendering of all the audio.
I use an IMac with OSX 10.6.5 with 266 GHz intel Core i5.
Thank you in advance for any tips that could help.

Hi Sid
I get the video in my browser but it has no accompanying audio.
YES - This is the way FinalCut Express AND Pro works !
If You need the audio - Then You connect a small set of speakers to Your miniDV Camera
(headphone out)
alt. if no phono-out on Camera is to connect a small TV to the Camera analog way
and here You can both see and hear during Capture
(BTW - Connecting a small TV (or if §§§§§ is no problem a reference monitor
§5-10,000 or even more) is a Very good way of keeping Quality control during
editing process. Eg Transitions, audio levels, color fidelity etc. I do and the
ref monitor are well compared to my final DVDs.)
There are NO WAY that You can monitor audio during Capture in any FinalCut versions !
Yours (been there and done that - or as said in Sweden "butted Your head at it") Bengt W

Final Cut Express won't capture audio with the video anymore, why?

I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

Audio De-Sync during Capture in Final Cut Express

Similar Messages

Maybe you are looking for