Audio description on the Vbox

Can the VBOX do audio description (That's audio description, not subtitles)
How do I switch it on?
Why do upgrades always come with a downgrade
Solved!
Go to Solution.

BTVision> Settings> General Settings> Audio Description
And there are options to set the level of the AD output
It works well.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Similar Messages

Turn Off Netflix/Apple TV Audio Description?

When I began the new season of a show I was watching on Netflix, an audio description of the show suddenly started playing. I have searched high and low trying to figure out if it was AppleTV, Netflix, my remote (Harmony), or my TV (a Sharp Aquos) that suddenly decided I needed that feature. So far, no luck. Does anyone have a solution?

Hey you guys, Me too, It just happened to me right now, was trying to watch New Girl (can't live without Jess Day, but we all know this by now...) season two to be exact, and it started doing this annoying narrating thing, totally turns me off by the way (in a Schmidt voice) "we build this Schmidtty on tootsie roll"... Lol
has anybody come up with a solution to this, or I'll just have to bare with it for the next two episodes... (I have watched all three seasons for the third time now) But still need it to be perfect every time I watch!!!! Thanks...

HT204370 My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

Actually, try this instead. On the apple tv, under settings > Audio > Dolby digital
Change it From AUTO (default) to ON
That worked for me. All my eyetv encodes have stereo and 5.1 tracks. For some reason the auto option forces stereo. Setting it to ON forces the 5.1.
Everything sounds nice again! It's just stupid that apple puts AUTO for the default and that setting results in stereo not 5.1.

Filter films by audio description availability

Is it possible to Filter films by whether audio description is available on them? (i'm in UK, so using UK store)
I cant seem to find out which films have it (very few it seems) and which dont?
Thanks for any help

Hi Chris,
Hardware acceleration on or off makes absolutely no difference, i recently tried watching videos in a 100% fresh install and new profile in firefox (no addons) and the problem still occurs albiet a little slower in the new install, ie it takes a little longer to drop out of synch.
There is a noticeable difference in framerate just before the problem occurs, like a very tiny hiccup, from that point on the audio gets left further and further behind, it's remedied by clicking back a few seconds on the video play bar but this is only temporary, lately i've even noticed it happening with live streams from the BBC, once again i must stress, this doesn't happen in Chrome or Opera or IE.

Can I change the image, name & product description on the iTunes page?

Hi there,
I recently started a new podcast, Jazz Now! Seattle. When I first entered it I used a logo that has now been change. I have also reworked the title. And the description on the iTunes page has a "/" in it that shouldn't be there. You can see it all here:
http://itunes.apple.com/us/podcast/jazz-now-seattle/id389101248
Can I change these things?
Thanks!
Jason

As you are using WordPress you will need to change things there: if you were to edit the feed itself it would simply be overwritten the next time you added something. If you change the title and remove the slash in the appropriate places in Wordpress and republish then iTunes will pick up the changes - possibly it may not do so until you add a new audio episode.
As to the image, simply point Wordpress to the new image (with a different name, don't just create a new image with the same name) and again this will update, though it will probably take some days.

Audio description not working

I seem to have the opposite problem to most people here, judging by previous posts. I want AD to work. Occasionally, when a programme is marked AD, there is no AD on it. Tonight is a case in point. Dirk Gently episode 3 on BBC4, no audio description. We know that it should be there because it has worked on the first two episodes. This is not the first time we have experienced this, so can someone explain why AD is sometimes simply not there when it should be.

It seems I have a red light in my headphoneplug. It says that is an indication of the wrong driver installed on the system. But Windows have installed it automatically. Do someone have any idea?

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Iview: Push button for switching on or off the description of the document

Hi all,
In the AdminExplorer iview, I want to have a button to display the description of the document, as it happends in the following page.
https://www.sdn.sap.com/irj/sdn/downloads
I've added the follwoing rnd:command(command=NEWCOMMAD/style=icon)
in List Renderer's Dispayed properties field, BUT
a)I dont know how to create that NEWCOMMAND,
b)I dont know if this the correct way of doing it.

Quick answer—No.

Change the field description in the query report

Dear All,
I have created a querry using SQVI,It is working fine Now i want to change the field description in the querry report,Please suggest on this.

Hi,
follow below steps
SQVI -> Enter Report name -> Change -> click on layout mode - > Expand tables - > double click on filed names - >
coming right side you are able see list of output fields .
Just double click on the field then going to the editable mode Description.
Thanks
Balakrishna

Populating the field description on the screen

Hi Group,
In the program after executing on the screen I have 3 screen fields. After entering the two fields when user hit the enter it needs to retrieve third field value from the table and have to display on the screen,and again I will click execute button the program needs to run.
But after entering the two fields and hitting the enter program executing and the third field value getting populated after the execution.
I am using the following code:
here in this P_scen and p_fid filed I am entering on the screen and after hitting the Enter I need to populate
p_des before doing the execution.
AT SELECTION-SCREEN on block selblock.
*Fetch the the database table
PERFORM retrieve_table tables    it_des
                          using     p_scen
                                    p_fid
if sy-subrc <> 0.
    MESSAGE 'Not found'.
endif.
* Pass the description of the scenario.
p_des = it-desc.

Check the FM DYNP_VALUES_UPDATE:
    ws_dyname   = 'ZSRO_MASTER_DATA'.
    ws_dynumb   = '1000'.
    ws_dynpfld-fieldname ='PPDESC'.
    ws_dynpfld-fieldvalue = ty_aa-name_textc.
    APPEND ws_dynpfld TO i_dnpfld.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname
        dynumb               = ws_dynumb
      TABLES
        dynpfields           = i_dnpfld
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.

Material description in the SUS vendor screen in MMSUS scenario

Hi All,
We are working on MM SUS scenario with SRM5.0 and ECC 6.0 as the backend.
We are sending the PO and SAR from R3 to SUS. When vendor logs in to create a POR and ASN, he is not able to see the material description rather only material code is available in the screen.
Same thing for the business object BUS2231 ( for ASN) we are able to see the same in BBP_PD in GUI.
What could be the reason?
We are using standard BSP pages for SRMSUS service.
Best regards,
Sridhar

Hi All,
Any clues on this, are we missing any standard jobs which are to be scheduled for bringing material description to the SUS screen?
Best regards,
Sridhar

How can I use OnBoard+Aditional audio cards at the same time? !!! BIOS PROBLEM !!!

I want use both audio cards. The On-board audio + SoundBlaster Audigy. Because I have mp3 player mp3tunes ( from http://www.mp3tunes.nl ) that is able play on both audiocards at the same time. It is good for DJ. One audiocard is for pre-listen.
But in BIOS is possible set only disable or auto-detect. When I set autodetect, then OnBoard audiocard is automaticaly disabled if there is another audiocard. Please tell me, what can I do for enable both audiocards ?

It's been awhile but as I promised here is my update:
I purchased an E-MU 1820m Pro Audio interface several months ago and ran it in my system for some time with the onboard audio disabled. Since this audio system is mainly for mid/high end audio production making use of low latency and up to 192mhz sample rates & 20/18 i/o then it is a bit of an overkill for using it for general multimedia & games so I thought I would place my c-media pci card back in and enable the onboard setting & see if the two systems would run ok together.
I first made sure that I uninstalled the e-mu card & then put the onboard card back in & installed the drivers. I then installed the E-MU, making sure that it wasn't sharing an IRQ with my 9600 pro like it originaly did on the first slot. So after installing that and the IRQ's were looking good I tested it all out and the results after two weeks have been perfect. I use the C-Media audio with the WDM drivers and use it for general audio & multimedia while I use the E-MU card with the E-MU ASIO 2 drivers and I use this with my audio production programs like Sonar, FL Studio & native Instruments Battery & Traktor.
Conclusion: Yes you can run a pro audio system as well as the onboard sound card with the MSI 865 Neo2 FIS2R.

How do I use 2 Core Audio devices at the same time in Logic w/out switching

Hello, I use the Aardvark Direct Mix usb3 as my audio interface for mic and guitar. I just upgraded to Logic Pro 7 today and was hoping someone could tell me how I could use the Built-in Audio Core Audio driver along with the Direct Mix USB Core Audio Driver at the same time without having to switch Core Audio Driver's and than rebooting Logic. It is very frustrating doing that as well as not being able to hear my Logic audio during playback/record mode when I am trying to record via the USB3. WHat can I do? Thanks! If ther are both core audio, why can I not just use both of them at the same time? Why must a switch back and forth? Thanks!
[email protected]

THanks everyone! awsome article! Thanks for posting it, nh!
The weird thing is, once I go up to the Menu and select Open Aggregate Device Editor in the AUDIO/MIDI setup utility and try to add a new Aggregate Device setup (step # 6 from the link), the only audio device available is the "Built-in Audio". What's weird is when I have the main Audio MIDI Setup utility open, every single drop-down menu/tab has the "Direct Mix USB 3 1.0.9.1" device right beneath the "Built-in Audio" option. To me that says that the core audio device is indeed recognized by my computer (obviously since I can record with it using Logic). Can anyone help me with this one? Any suggestions?
Not that it should matter but, the hardware audio interface that I am using is made by the no-longer-existant company once known as Aardvark. I actually had to purchase a third party Core Audio driver just to have it recognized by OS X.
This is the website where I purchased my audio driver :
http://www.usb-audio.com/
A little more on how this device and it's core audio driver function within Logic . . . (Hopefully this might clarify something I may be screwing up) . . .
I launch Logic with its default Built-in Audio which allows playback of audio from the app. I than go up to Audio Hardware and Drivers and than drop the flip down Driver menu down to the second option, "Direct Mix USB 3 1.0.9.1." Logic than prompts me that I should try to (re)launch Logic Pro to load the appropriate CoreAudio.. I do that. Now I am ready to record guitar through the Direct Mix USB3, I just can't hear anything (unless I use head phones as an output from the Direct Mix).
Anyway, you all probably already knew what I meant so explaining that was pointless. But my question is, if the Driver is obviously recognized by my comp in both the Audio MIDI Setup and in Logic, than why won't the Direct Mix device show up as a possibility for setting up an aggregate device? Any suggestions? Thanks!
Power Mac G5 Dual 2.7Ghz 4.5gigs of RAM Mac OS X (10.4.7)
Power Mac G5 Dual 2.7Ghz 2.5gigs of RAM Mac OS X (10.4)

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device

mickyja wrote:
I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device
Micky,
The iTunes Store sells songs in AAC format. Most Android phones can play AACs. Just sync them to your phone per the instructions with the phone.
If by any chance your phone does require MP3 format, you can use iTunes to convert the files, per this guide:
iTunes: How to convert a song to a different file format - Apple Support
(This conversion does not require burning.)
For future reference, note that the iTunes Store is really optimized for people using Apple devices. You might find it more convenient to buy music in Mp3 format from Amazon Digital Music or Google Play Music.

Audio description on the Vbox

Similar Messages

Maybe you are looking for