Audio disabled when linked to port duplicator

I am using Windows XP with my Thinkpad T400, and bought a Lenovo port duplicator model k33415 with my computer. I have a keyboard and mouse attached to the port duplicator as well as a PDA sometimes.
Whenever the port duplicator is attached to the computer, the computer speakers do not work and I cannot hear any audio. When I restart the computer without the port duplicator attached, the computer speakers work fine. I have tried everything! Any ideas?
Solved!
Go to Solution.

Hi! Actually, I fixed it on my own. Under audio properties I adjusted the settings for "Conexant HD audio", made it my default device, and under AUdio and then "advanced," I needed to set speakers to laptop speakers. What I have not done yet is seen whether this disables audio when I disconnect from the port replicator.... then I suppose I need to change the default device. You may not have the same problem, but at any rate, good luck!

Similar Messages

TV audio problem when linking netbook

i am trying to link a netbook to my TV. I have got visuals but no audio. I have been advised the 3.5 stereo jack cable will work but it hasn't. Any ideas?

I am looking up the manual of your TV, there is headphone Jack on the TV... you will need to use 3.5 Mini-Jack to Composite cable to have Audio coming from TV...
The cable looks something link this....
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me

please replyyy i'm stuck on this like whole week

Audio autoplays when I finish a phone call. How do I disable that?

Audio autoplays when I finish a phone call. How do I disable that?

Hello BobWeaver,
It sounds like we need to troubleshoot the software on your device as that is not expected behavior.
I would perform steps 1, 3 and 5 from the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/. If you get to step 3, then I suggest closing all the apps. Here is step 1 to get you started:
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
Cheers,
Sterling

Need to Disable a link when a condition is failed in Web dynpro ABAP

HI Gurus,
I have an requirement, I am displaying one form, above the form I am displaying the link as Overview. if some conditions failed and the form is not displayed, I want to disable that link ' OVERVIEW" should be in disable mode.
Please provide the code how to approach this.
Thanks
Rahul

Hi Radhika,
Thanks for the Response.
I wrote the below code for making the link disable.
data lv_link_disable like ls_context-link_disable.
get element via lead selection
    lo_el_context = wd_context->get_element( ).
get element via lead selection
    lo_el_context = wd_context->get_element( ).
fill attribute
    lv_link_disable = abap_false.
set single attribute
    lo_el_context->set_attribute(
    name = `LINK_DISABLE`
    value = lv_link_disable ).
But unfortunately its not wokring.
Can you please let me know what I need to add to this.
Thanks
Rahul

I suffer from the problem of cutting picture and sound when Link Mac Pro with the TV via the Apple TV Is there a solution to the problem

Have trouble cutting (the delay) picture and sound when Link Mac Book Pro with the TV via the Apple TV Is there a solution to the problem.
(this problem is when I follow films in the sites and forums or watch the live broadcast of certain programs by using the browser Safari)
I want a solution TV Apple made meI feel disappointed

Has anyone else encountered or solved this problem? Same thing is happening for me with a new MacBook Pro, 13" i7 and an Echo Audiofire 4. It's not even clear to me from searching if this is the processor idling or the firewire port hardware. Only thing clear to me from testing is that it does have something to do with using an audio interface - I don't get this noise plugging in my external hard drive, but I still hear it if I daisy-chain the hd through my interface. Any help or recommendations appreciated - do pc firewire ports have this issue too?

How can i disable a link/button after clicked while content active

hello all
i am building a website all on one page and am using the
spry framework so that it displays when clicked fades in
the issue is i dont want the link to work again after its been
clicked ie when the link is active then
when another link is clicked it is re activated and
can be used again!?
i am using the behaviours panel in dreamweaver?
cant seem to find an option to
toggle this function
i am not great at js or html
but any help would be appreciated!
many thanks
]p

Because we are not privy to your code I shall answer this in general.
You can use the Spry Element Selector to target your link and to disable that link. When clicking another link you could cycle through your links and enable them before disabling the newly clicked link.
More info on the Spry Element Selector can be found here http://labs.adobe.com/technologies/spry/articles/element_selector/index.html and here http://labs.adobe.com/technologies/spry/articles/element_selector/selector_examples.html

Help me Please.. I can log on to the Apple website to manage my account and all the information is correct, but I get "Your Apple ID has been disabled" when I try to get something from App Store on my iPad

Help me Please.. I can log on to the Apple website to manage my account and all the information is correct, but I get “Your Apple ID has been disabled” when I try to get something from App Store on my iPad3
I'm from poland.
Thx
Balbi

Contact iTunes Customer Service and request assistance...
Use this Link > Apple Support iTunes Store Contact

I'm getting the message, "Your Apple ID has been disabled," when I try to make a purchase. I reset my password and updated it in my account, but it still won't let me purchase anything. How can I fix this?

I'm getting the message, "Your Apple ID has been disabled," when I try to make a purchase. I reset my password as directed (several times) and updated it in my account, but I'm still getting the same message. What do I do?

You need to contact support:
http://www.apple.com/support/itunes/ww/
Enter country and select bottom contact support link on the left on the next page that loads.
AC

FAQ: How do I troubleshoot audio issues when importing .MTS files?

Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.

Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

When links are clicked, they do not fully display the NEW page until the mouse is moved.I know it is a current bug, and appears in no other browsers that I know of.

It was pointed out that my links do not function correctly on Firefox on a Windows platform. When links are clicked, they do not fully display the NEW page until the mouse is moved! I have now observed it for myself on my fathers PC running Windows XP on Firefox.My PC is on Windows7
It is the 5 version of Firefox, so I know it is a current bug, and appears in no other browsers that I know of.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4+ you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Enable disable linkbar links in datagrid itemrenderer.

Hi All,
I have to show the linkbar in datagrid column as a renderer and enable and disable the links according to attached documents codes.
here are my sample code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="init();">
<mx:Script>
    <![CDATA[
        import mx.collections.ArrayCollection;
        [Bindable]
          public var arrColl:ArrayCollection = new ArrayCollection();
          public function init():void{
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
              arrColl.addItem(["1,2,3","1,2"]);
              arrColl.addItem(["1,2,3", "1,3"]);
    ]]>
</mx:Script>
    <mx:DataGrid id="dg" dataProvider="{arrColl}" width="200" height="500" x="510" y="168" >
        <mx:columns>
            <mx:DataGridColumn itemRenderer="assets.components.linkbarItemRenderer" />
        </mx:columns>
    </mx:DataGrid>
</mx:Application>
My item renderer linkbarItemRenderer.mxml as
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" creationComplete="init();" >
<mx:Script>
    <![CDATA[
        import mx.controls.LinkButton;
        import mx.collections.ArrayCollection;
        import mx.controls.Alert;
        [Bindable] public var arrColl : ArrayCollection = new ArrayCollection();
        public var arrDocType : ArrayCollection = new ArrayCollection([{data:"1" , label:"AP"},{data:"2" , label:"AR"},{data:"3" , label:"BOL"}]);
        public var attDoccodes : Array;
        public function init():void
            try
                var requiredDoc :String = data[0];
                var attachDoc : String = data[1];
                var reqDocCodes :Array = requiredDoc.split(",");
                attDoccodes = attachDoc.split(",");
                if(reqDocCodes != null)
                    //add the links of required documents.
                    for(var i:int = 0 ; i<reqDocCodes.length; i++ )
                        var obj:Object = new Object();
                        for(var j : int = 0; j < arrDocType.length; j++)
                            if(arrDocType.getItemAt(j).data == reqDocCodes[i])
                                obj.label = arrDocType.getItemAt(j).label;
                                obj.data = reqDocCodes[i];
                        arrColl.addItem(obj);
                callLater(enableDisalbeLinks);
            catch(error:Error)
                Alert.show("error ::"+error.getStackTrace());
        public function enableDisalbeLinks():void
            try
                //disable all links first
                for(var q:int=0; q< arrColl.length; q++)
                    LinkButton(linkBarId.getChildAt(q)).enabled = false;
                if(attDoccodes != null)
                    for(var k:int = 0; k<attDoccodes.length; k++)
                        for(var l:int = 0 ; l<arrColl.length; l++)
                            if(arrColl.getItemAt(l).data == attDoccodes[k])
                                LinkButton(linkBarId.getChildAt(l)).enabled = true;
            catch(error:Error)
                Alert.show("error ::"+error.getStackTrace());
    ]]>
</mx:Script>
        <mx:LinkBar id="linkBarId" dataProvider="{arrColl}" />
</mx:HBox>
It renderes the link in correct form in datagrid first time.when i scroll the datagrid the rows are miss up with each other and links are not shown propers in enable/disable format.
Thanks,
Amol.

Hi All,
It was my fault. Got it work now.
When I redirect to PR, it also calls my page initialization method and clear all data. I added a parameter and issue resolved.
Thanks & Regards,
KJ

Audio distortion when fully inserting headphones

Evening Applers
I've noticed a small crack on the very top left of my 3GS around the metallic frame that has coincided with a problem with the audio when adding headphones.
I suppose I'm trying to diagnose whether the impact of this crack could have damaged in some way the audio jack to cause audio problems when fully inserting the headphones. If I insert the headphones 1/2 way the audio is as new, but obviously as they're not fully inserted makes it tricky to listen without having to support the jack to provide the connection.
I've tried fully inserting a similar jack linked to my stereo, however, and the audio is as new!?!? I've also tried the headphones out of another iPod to see whether that is causing a problem as well as attempting to clean the jack and blow any dust out but to no avail.
Does anyone recognise this problem, and can offer any tips or suggestions as to resolving this?
Many thanks in advance
Tim

Many thanks for your reply,
I thought the same but would have thought the jack would then display similar problems when playing through another 3.5mm plug..it also turns out that the phone speaker itself doesn't work either unless the speakerphone is on. I'm beginning to think that something else is going on!!
I've no recollection of a bump, deep or crash of the severity that it would appear knock the whole audio aspect of an iPhone. I appreciate they are sensitive pieces of kit but this is a bit much..

Error when creating Logical Port via WSDL on SOAMANAGER

Hi,
When creating Logical Port via WSDL on SOAMANAGER we're getting the following error:
"Uninstantiated object u201Csubject sidl serviceu201D in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL".
We're consuming a WS provided by a .NET application.
Our system is ECC 6.0 NW 7.01SP 7.
Anyone have faced this error before?.

hI,
Please go through this link , you will get the solution
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3

What can be done in our code in order to disable the Link/Hand/Popup actio?

Hi all,
We are implementing a process that includes an Adobe Form. This form retrieves some information from our ERP and has some images that represent some executives signatures and companys logo. At runtime, this application seems right, but when you place the mouse over the images a Hand appears and a click is possible. If you click over it, a FileSystem PopUp appears and you can choose a new image. What can be done in our code in order to disable the Link/Hand/Popup action??
Regards and Thanks in advance!

Hi Carlos,
You can write a script to make it readonly .
Click on the image element .check the object properties.
find the bind
nd u can use the formcalc script to disable action like;
Event :Initialize
Script :formcalc
runat :client
Subform.image1.access="readOnly"
Swathi
Do offer pts:-)

Audio disabled when linked to port duplicator

Similar Messages

Maybe you are looking for