Audio disconnected

I am trying to move a project to an external disc and the audio seems to have become disconnected from the project.
Is there a way to re-connect it?
The audio files are still on the hard drive but I get the warning that they are missing when I try to move it.

See my reply to the thread [here|http://discussions.apple.com/thread.jspa?threadID=2611509&tstart=0]
Also, you should be able to move your Project back to the internal drive and everything should work again. Then use the File/Consolidate command.
If you used the Finder to do the initial move, you should be able to use the Finder to move it back. If you used iMovie to do the initial move, the FILE/CONSOLIDATE command should work without moving it back.
Message was edited by: AppleMan1958

Similar Messages

Phone disconnected/audio disconnected phone connected/audio connected

Since the update, my 2014 toyota corolla intermittently says phone disconnected/audio disconnected then phone connected/audio connected. Sometimes I have actually been on the phone when this happens, my calls drops and then reconnects again as if nothing happened. I miss parts of the conversastions, one time it was actually a really important call that I was taking.

Yes, Sky did raise the fault with BT and they stated it was a disconnected line.
the reason was that another phone line was connected. they told them to correct the mistake as was told it was not a mistake as it was a disconnected line.
5 hours of phone calls later to Sky and BT and the best a Sky technical Manager could offer was to reconnect with a new number for free (no 120 pound charge) still waiting for the 2 week wait for a phone number. Then I will need to wait another 4 days for internet.
4 weeks lost in phone and internet usage becaue of an engineer error and then another error in not being able to correct a fault correctly.

ATI HD AUDIO DISCONNECTED?

When I connect the laptop to a TV with an HDMI cable, I get video but no sound. In Control Panel, everything is supposedly up to date and working correctly, yet the ATI HDMI Audio is shown as disconnected. How do I get it to work?

Hi @MINERVAH ,
Welcome to the HP Support Community! I hope that you enjoy your time posting with us.
I see that you are having an issue with your sound while using an HDMI cable. I will be happy to help. Here is an HP document Troubleshooting HDMI Display and Sound Issues. It will show how to set the default audio device to fix this issue.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Help. Audio disconnect.

As I was putting the finishing touches on my movie, my hard drive unplugged. I was able to reconnect most everything but I've lost a lot of my audio in the process. I must have misconnected something and hope I didn't cause a problem that will involve realigning the audio. Can I pull of a previously saved version or will my attempt at reconnecting effect the older versions as well. Also, how can I pull up a previously saved version?

You can always try! Go to where you have your Autosave Vault located, probably in your FCE Documents folder. Hope that FCE saved a copy of your project before the drive became unplugged. Look through the files in the Autosave Vault, and if there are any before the media drive became unplugged (you can look at the time they were saved), open up the most recent one before your problem occurred. Anything you did to harm your project would probably not affect the data in the autosaves.
That being said, if your drive unplugging altered any of the source media that may have been on the drive, then any autosave file is going to be a problem because they all draw on that media.

Airplay audio disconnects

Last used airplay about a month ago, and just upgraded to iOS 7.02. Now, airplay will not stay connected for more than a minute or two. Never have had a problem before.
Apple TV is connected via Ethernet, Airport Extreme is 9 feet away in the same room as the iOS device.
Airport extreme is on most recent firmware. Apple TV was on the last version of firmware, but upgrading it did not help resolve the issue. Have restarted all devices.
Have followed suggestions in KB TS4215, including turning off Bluetooth.
http://support.apple.com/kb/TS4215
Additionally, I see that the Apple TV does not report the name of the song at all times. When going to the full screen screensaver, it reports "unknown artist" without cover art. However, when first starting to play the song, it shows all the information in the small itunes mirror playbar on the lower part of the screen.
Does not seem to disconnect when doing mirroring.
Any ideas on what may be causing the issue?

Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
Step 1
Back up all data.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 2
Reset the System Management Controller

Bluetooth audio disconnects

Why does my aptx bluetooth connection disconnect after 3 minutes and 6 seconds repeatedly?
I'm using a cambridge DAT Magic Plus with a BT 100 and a Sennheiser aptx dongle on my mac pro.

CA have issued a patch for BT100 that fixes this aptX problem, it's available on the website here...
http://www.cambridgeaudio.com/media/bt100-update-1358943176.zip
You need Windows to run the patch though

Logic Pro 9.1.7 + Imac 2010 + 10.7.4 + Firewire = Audio Error and Solution.

Hi all,
This post is the end of a weeks long hair pulling, to save other people the pain of my past week, here is a quick rundown of the issue and the solution that for us at least worked.
All the software is legit and fully updated btw, before people ask.
Logic Pro 9.1.7 on 2010 Imac on 10.6.x, Refx Nexus, Sylenth plus many other VST's and Au's, Mackie Pro + Extender, 2 Midi Keyboards (Oxygen 49 and Alexis 49) and with a M-Audio 410 external soundcard running 10.1.3 driver, all working.. only issue we had was when copying midi between tracks into differing plugins the midi would corrupt the plugin requiring a restart of Logic.
This error we later discovered was due to midi automation for plugins being copied over, but that is not this issue.
Updated OS from 10.6 to 10.7.4 by way of 10.7.4 Combi Update. Removed M-Audio Drivers and then installed 10.7.4,
Installed brand new GRAID 4TB external disk (Raid 0 at 64kb block sixe) and connected M-Audio 410 via daisy chain.
Installed M-Audio Drivers, all ok.. at first..
Graid is 800, M-Audio is 400.. Connected as Imac -> GRaid -> Maudio
At first, its good, no issues.
Copied over a whopping 550GB off Imac onto external.. then later on, rebooted mac and started working on music.
Ran Logic Pro (64bit mode), whilst using Midi with Nexus we discovered the Audio at first was ok, but quickly over time degraded to where the sounds started becoming distorted, the more we went on, the more the distortion increased, after a while the midi notes were just sounding awful.
Rebooted mac
Started using Logic again, not 1 minute in, External drive and M-Audio disconnected themselves from the Mac.
Rebooted
Hard drive now seen, no M-Audio.
Now though, even using Itunes or Quicktime or VLC on any mp3 via internal soundcard, quality was.. well terrible. Within 2 seconds of hitting play, you knew it was bad.
Shutdown, removed external drive from chain, rebooted Mac -> M-Audio
M-Audio now seen, sound quality dreadful, shutdown Mac, rebooted without M-Audio, sound still awful just on Internal audio.
Time passes, I smoke too much, prod and poke and eventually reach for the install media
(Lots of shutdowns and restarts in next bit, after each line, also carefully reset and tested every Audio setting.)
Removed M-Audio driver
Installed 10.7.4
Installed M-Audio
All good again.
Later, as a test, connected External drive on its own, no M-Audio
All good.
Second test, added External Drive plus chain to M-Audio
Not good, M-Audio seen but even though sound bars showing on M-Audio software, no sound out to mixer
Removed External Drive from Chain, M-Audio now straight to Mac.
All BAD; sound was terrible,
Disconnected M-Audio
Playing any Mp3 via internal Audio, terrible..
Whatever happened, has thrown the entire Audio system into a mess, again!.
Removed M-Audio driver.
Reinstalled 10.7.4
Reinstalled M-Audio Driver
All good, on internal or external Audio
Disconnected M-Audio
Reconnected External Drive Only
Drive OK, Internal Sound OK.
Removed External drive
Reconnected M-Audio
All ok, internal or External.
Ok, Final conclusion.
When the M-Audio (400FW) is connected to Mac via External Drive (800) the Audio is knackered from that point onwards on 10.7.4, removing M-Audio drivers and re-installing makes no difference, even the Internal Sound is knackered.
Only solution at this point, remove M-Audio driver, reboot, reinstall 10.7.4, reboot, reinstall M-Audio Driver, reboot.
Then its all good again.
My guess is this, and I am probably wrong but it is all I can think of.
When the M-Audio is daisychained the Mac changes a setting somewhere, probably to adjust for high latency, at this point it is written somewhere (either as a file or as DSP bios setting) that is not being reset.
This is why it is completely broken until 10.7.4 is re-installed at which point whatever setting it is that was changed, is reset.
This is all I can think of, I have posted this so that if someone else in the weeks ahead has a similar issue, it will save you the stress and late nights I had this past week.
Take care all.

I was seeing the same problem... I'm a new Logic user, switching from DP, and so it was a minty fresh install of Logic Pro 9.1.7 under ML.
It turned out to be a third party graphics driver that was screwing up some internal process: specifically, the dirver for AirDisplay, an iOS app that lets you use an iPad as a portable monitor. When I removed the driver, the problem cleared up instantly, and I have done 9 hour sessions in Logic since then without a single hiccup.
If you're running a third party driver, remove it, repair permissions and see if the problem clears up.

PowerBook G4 "Sees" Bluetooth Headset but Disconnects During Use

At the recommendation of an Apple Store saleperson, I purchased a Motorola Bluetooth Handsfree Headset (Model H700). I have successfully connected to the Mac (G4 PowerBook), and it recognizes the unit as being connected properly.
When I try to listen to iTunes, or make a SKYPE call with the headset active, I get a message "Bluetooth audio disconnected. You headset unexpectedly disconnected. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted."
I have spent 3 hours on the phone with Apple Tech Support, and Motorola. No one has a clue what this means or how to fix it. Any ideas?
The setup assistant on the Mac shows everything to be checked out just fine. The headset works because I can hear it "beep" in my ear when I turn it on.
HELP!
Blue about Bluetooth

What I've discovered is that I can't set my bluetooth headset as the default audio output device... that causes all sorts of weirdness, usually resulting in my having to reboot the OS.
That said, I have no trouble using my headset with Skype. I leave the defaults under the Sound system preferences panel to Internal speakers / microphone, but I set the audio input / output to my headset on the Skpye Audio preferences page.

FireWire Audio Heat Problem (Macbook Pro, Late 2008) VIDEO proof

http://www.youtube.com/watch?v=JYHnX3CGUoo
After a lot of hours of trying to figure out WHY my macbook pro heats up (a lot) when i connect my newly bought Apogee Duet firewire audio interface, i found out that actually what was happening is that there are CPU spikes of extremely short period (so short that Activity Monitor and iStat could not catch) constantly spiking the CPU frequency from 1596Mhz (Idle) to 2572Mhz (Maximum). Apart from the frequency spike there is also a VOLTAGE spike from 1.0v to 1.15.
I know that this is normal due to speedstep technologies and such BUT the rapid spiking and alterations of frequency and voltage ALWAYS happening when i have my Firewire audio plugged is not normal to me. There is nothing else running, everything's idle and i only plug the firewire interface.
Also this is not happening when i restrict OSX from loading AppleFWAudio.kext (either by deleting, moving, renaming it). I connect the firewire audio interface, the leds are illuminating but no heat problem (thats to show you that is not because the interface is self-powered)
Whats going on seems to be similar with the problems occurred after Mac Pro Audio Update to users that was using FW audio devices. They were hearing a sine noise coming from their macpro and propably that was because the same thing was happening. Constant spikes of voltage to the CPU. I dont have a macpro thought so i cant apply the update Apple released for that issue.
Also, my macbook is using Lucent / Agere (LSI) firewire chipset (the particular and known revision 6) but i dont think that this is the cause since Apogee didnt have any problems with the chipset
Info: The app im using to monitor the Frequency and Voltage is CoolBook, can be found here: http://www.coolbook.se/CoolBook.html

Firewire Audio disconnected / or AppleFWAudio.kext unloaded = Idle temp arround 50 celcius (iStat)
Firewire Audio Connected with AppleFWAudio.kext loaded = Idle temp arround 60 celcius (iStat)
If theres a possibility that this is due to bus powered firewire device (cause i have an external FW hard drive that is self-powered and temps are not rising when i connect it) then AppleFWAudio.kext maybe manages something with bus powered firewire.
Maybe when i have the interface connected but the kext not loaded the mA sucked by the interface are too little for causing a temp rise but by the time the kext is loaded and the interface is converting audio the mA required tops up so the temp rise comes from the mA load on the firewire bus and not the cpu itself.
*Even if that's the case, the rapid spikes of throttling on the cpu by the time the Firewire Audio interface is connected bothers me. This isn't something that should normaly happen on an idling machine.*

Pick only video and not audio to edit in timeline

How can I only move the video and not audio to the timeline when I pick a clip I want?
Everytime I drag it to the timeline it brings the audio and video and I have to unlink it and then delete the audio.

Disconnect the audio in the patch panel at the left end of the Timeline window. Click the a1 and a2 source tabs to disconnect them from their destination tracks (A1 and A2 by default).

X230 Type 2306 Lost Audio

I have an X230 Type 2306-CTO (Windows 7 64) that has recently lost audio.
No program has working audio, nor do working headphones produce sound.
I have installed and ran Lenovo system update version 5.03.0005.
I have also installed and ran the "Troubleshoot Audio Playback" troubleshooter for Windows 7. It asks if I want to troubleshoot "Speaker/HP - Realtek High Definition Audio" or "Headphones - Bluetooth Hands-free Audio". If I choose "Speaker/HP" it "couldn't identify the problem", and if I choose "Headphones" it prompts me to "plug in the speaker, headset or headphone" even when headphones are already plugged in (it does not recognize plugged in headphones, and the troubleshooter stops there).
If I click on the speaker icon in my lower right hand tray, I can adjust the volume to 100%. If I open the mixer, both Device and Applications are at 100% and not muted. If I open Speaker/HP properties, device usage is listed as "Use this device (enable)". If I choose the advanced tab and try to play a test tone, "Failed to play test tone" message is given.
Any help would be greatly appreciated.

Mithun,
When I went into my “Manage Audio Devices” (at work) I noticed three devices:
Headphones (Bluetooth Hands-free Audio, Disconnected)
S271HL (Intel(R) Display Audio, Default Device)
Speaker/HP (Realtek High Definition Audio, Default Multimedia Device)
I disabled the S271HL device, which then made Speaker/HP my default device. I then double clicked on that device, chose the enhancements tab, and made sure the “Disable all sound effects” option was chosen.
This did not restore audio.
Then, under “services.msc” was listed “Windows Audio” and “Windows Audio Endpoint Builder”. I right clicked both of them and chose “restart”.
This did not restore audio.
I then went to my “Manage Audio Devices” (at home), and the S271HL device was no longer listed.
I retried resetting the two items under “services.msc” (at home) and audio was not restored.
I then went to my “Manage Audio Devices” (at work, next day) and the S271HL device was listed again, and still disabled.
I then used CCleaner to run the uninstaller for Intel(R) WiDi. After restarting my computer, I then returned to “Manage Audio Devices” (at work) and the S271HL device was still listed, and still disabled. However, audio still did not work.
I would appreciate any additional suggestions.
Kevin.

MSI 990FXA-GD80 updated POST code "99"

I started my computer up last night after 3 months of using it and now it is posting a 99 code when I start the computer. I can't get to bios or boot. Keyboards will not work (both PS2 and USB). BIOS was completely up to date for nearly 3 weeks.
This morning, to no avail, I tried a new power supply.
At this point I have tried all of the following:
-Disconnecting HHD (SATA and POWER)
-Disconnecting Opitical Drive (SATA and POWER)
-DISCONNECTING ALL F-PANEL (PWR SW, PWR LED, HDD LED, RESET SW)
-Disconnecting the USB and HD AUDIO
-Disconnecting ALL fans.
-Mounting and remounting the motherboard
-Mounting and remounting the CPU
-Attempting to use a new video card
-Attempting to use a new power supply
-Placing MOBO on a different surface
-Reseting the CMOS via the on board button and removing the battery
-Using only 1 stick of ram to boot
-New PSU
Basically I am booting the PC with the power button on the MOBO and the only things connected are the 8 pin MOBO power, the CPU, 1 stick of ram, and 1 of 2 different working video cards.
After doing all of those things, the MOBO stills post code "99" on the screen and on the MOBO itself. Additionally, keyboard does not work. Furthermore, I cannot access my BIOS or boot screen.
The original video card and the replacement video card both work on another PC therefore they are not the problem.
Thus, at this point, I have narrowed the malfunction down to either the following two components:
-Motherboard
-CPU (which I doubt, but do not have a AM3+ mobo on hand) or another AM3/AM3+ processor
Any suggestions or advice are more than welcome and needed.
I am considering RMAing the motherboard...

Quote from: xmad on 19-July-12, 03:06:34
Hopefully the cpu isn't the problem, wish there was a way for you to test it out. A computer shop perhaps?
Just to be clear, you removed the mobo from the case with just a cpu, cooler, 1 stick ram & psu and don't hear the no vga beep?
I see you already tried a new psu.
Hope you get it right soon, good luck I think you are right it's either the cpu or mobo.
Yes. The GPU is working fine I tested it in another computer. I installed another working GPU, it did the same "99" post.
Unfortuneately, there are 2 PC shops close by. 1 of them is a "mom and pop" type place that really doesn't get too deep in to technical aspects and doesn't care much for AMD products. The second is a shop that only carries very low end products as well as some i3 type proccessors and mobos.
Thus, since none of the computer stores give a flip about AMD, I am out of luck in that aspect. I have quite a few AM3 boards laying around, but that does me no good with this Zambezi.
On a side note, I decided to remove the processor. The processor and the heatsink became merged together. What I mean when I say they became merged is that the thermal paste become basically a superglue between the heatsink and the processor (the FX-4170 naturally runs hot, thus, AMD has included an upgraded heatsink in it with better thermal paste). Anyhow, in order to remove the thing I could only get the mounting lever about a little over half way up. Therefore, on the back row, the pins bent a little (I would say there were making somewhere between a 80-85 degree angle orthogonal to the board). I took a credit card and a screw driver and straightend the pins, stuck it back in, still posted the same thing.
Last but not least, I read over the mobo specifications and realized that it was backwards compatible. The MSI 990FXA-GD80 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard supports the following CPU types/sockets:
Quote
FX / Phenom II / Athlon II / Sempron 100 Series
I realized I had a (working) AMD CPU HDZ955FBGMBOX Phenom II X4 955 Black Edition 3.2GHz AM3 125W Retail, thus, I mounted it on the MOBO... SAME CODE POSTED...
It must be the motherboard.

Accidently disconnected ipod without ejecting, now it only shows recent purchases. I can see 40 gig of original library but its listed as other not audio. Is this retrievable audio data or is it lost. I have no backup what can I do to restore my ipod?

I accidently disconected my ipod from my pc. When I plugged it back up I only had limited access to my library. I had over 40gb of audio data that now when I go to the summary page of my pod it shows up as other, only the audio that I have recently purchased from itunes is accessible. Is the 40gb retrievable and can some one please tell me step by step what I need to do. My collection took over a year to put together and there is no backup file.

"Other" is the measure of used space on the iPod not taken up by Audio, Video & Photos. This includes the iPod's library and artwork plus any files you may have copied to your iPod in disk mode. The overhead for the library & artwork data is typically 1-2% of the size of the media, e.g. for 1Gb of Audio & Video expect to have around 15mb of "Other". This information is needed for the iPod's operation and cannot be removed.
If you have significantly larger amounts of "Other", not related to files you've intentionally placed on the iPod, then these are probably disconnected copies of your media files or iPod libraries left over from failed sync operations. The only way to recover the space is to do a full restore.
If you have copies of all your media in your iTunes library this isn't a problem, but if you've been manually managing the content then you might need to try to recover the files from it first. See this post by forum regular Zevoneer on transferring files from the iPod to your computer. Some of the tools rely on the iPod having a healthy library however the manual method mentioned towards the end of the post should work regardless.
tt2

Audio tracks: lock vs disconnect?

Hi, all. I'm new to iMac and FCE Express. I'm not sure I understand the functional difference between locking the audio tracks versus disconnecting them. Don't both functions do the same thing?
Thanks,
Jeff

Yes, I guess I'm referring to the patch panel.
So you're saying that if I UNpatch, say, an audio track, and I have a clip in the Viewer that has both video AND audio, moving it to the timeline with the UNpatched audio track will move the video portion only, and not the new clip's audio?
I'm sorry, I don't mean to be an idiot about all this. I think I understand the concept of LOCKING and UNLOCKING the tracks in the timeline. I'm just not getting the whole thing of PATCHING and UNPATCHING tracks, and when patching and unpatching is to be used instead of locking and unlocking. It's a mental block of some sort??
Thanks,
Jeff
Message was edited by: jla930

I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another s

I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
My Iphone5 was replaced and having same Problem. Only does this when using bluetooth for talking.

I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
I might try a restore and see if it helps...

Audio disconnected

Similar Messages

Maybe you are looking for