Audio does not come out of my left speak

Hello,
I just installed a fresh installation of Vista two days ago.
When I installed it, I had a Sound Blaster Li've! 5. card in my machine, and the card did not work until I installed KM audio drivers (which made only the 2 rear speakers work).
Today I went out and bought the X-Fi Xtreme Audio card.
The installation appeared to work, and I installed the Vista drivers from www.soundblaster.com.
When I go to audio management, and test the speakers, audio comes out of all 5.
BUT - when Windows Media Player, MediaSource 5, and any other system sound plays... my front left and rear left speakers do not play a thing.
I know they are working, because when I tried the surround audio from http://www.microsoft.com/windows/windowsmedia/democenter/9series/avquality/wmapromp3/default.htm
they all played, but when I played stereo... it only came out of front right and rear left.
ALSO - I can't seem to find the Entertainment Mode, and some other features advertised on the box and guide that came with the CD.
Does anybody know what I can do to fix these issues? Help would be greatly appreciated.
Thanks,
Anthony Coy

Hello, Alexander meerkat.
Thank you for visiting Apple Support Communities.
I would start with resetting the System Management Controller. Here is the article on how to process these steps.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Cheers,
Jason H.

Similar Messages

Why is does audio only come out of the left speaker when I press the latency button....?!?!

Hello
I have a small problem which I hope someone can advise me on ......
Everytine I press the Latecny button on Logic 9 the audio will stop coming out of the LEFT and RIGHT speakers and only come out of the LEFT speaker ?
Audio sent out of DAW --------> Mixng Deck ------> back into Soundcard via SPDIF (digital) on inputs 9/10
I am sening al my sounds out of the computer to be summed on a mixing decks and then the 2 channles of audio from the deck is coming back into my soundcard as an digital a signle on INPUTS 9/10.
Can anyone please advise ..........!?!

Might want to read on what Low Latency mode does + why and when you should use it.
It's basically only used in realtime monitorinr when recording and/or when recording softsynths.
By reading the docs you should be able to figure out why the right side is being muted.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=41%26se ction=2%26tasks=true
Be sure software monitoring is Off when recording the summed input.

I have a disk in my mac and came not get it out? I use the command E key to eject but it does note come out?

I have a disk in my mac but it does note come out useing command e to eject? how do i get it out or do I have to get it jixed?

Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

External hard drive does not come out in desktop

greetings! whenever i plug in an external hard drive or a USB flash disk through usb, it does not come out in the desk top. before, it used to come out, now it doesn't. i am still using the exact macbook. i think i touched something in the settings. please help

Go to finder and choose preferences under finder in the menu bar. Now check and see if under General you have the choices clicked of what you want to show on the desk top.

Dbca does not come out after 100%

I have installed and configuredthe Oracle 9i Rel2 on RH Linux 9.
When I followed dbca steps to create a database, it does not come out after reaching 100%. I had to kill the process to end it. What could be reason? Because of this the init<SID> file is also not created.
Please explain
Mehul Trivedi

I have installed Oracle9i on RH9 and I was able to use
the dbca and really If your swap values in the OS are fine
I do know whatelse you can check.
If you want to create a database and the dbca is not
functioning you have another option ( Create it manually )
Chapter 2
Administrator's Guide Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
Joel P�rez

Monitor does not come out of sleep Mac-Mini Mini-DVI to Dual DVI-D cable

I have an August 2009 Mac-Mini that I'm using with an Apple supplied Mini-DVI to DVI adapter along with a DVI-D Dual Link Cable connect to a Sceptre X7XV-Naga+ LCD monitor.
The monitor is going into sleep mode on its own with no way to disable this feature on the monitor itself. I've disabled sleep mode on the Mac-Mini in the power setting in System Preferences.
When in sleep mode and I move the mouse or press a key, the monitor will not come out of sleep mode. From other posts, I read that the issue might be that I wasn't using a Dual-Link DVI-D cable, so I bought one and installed such a cable. That has not resolved the problem. The monitor will not come out of sleep mode. When I have the monitor connected with a mini-display port to VGA adapter instead of a DVI-D cable, it will come out of sleep mode every time.
Message was edited by: Annorax64

I know it's a year later, but I'm not finding much through search.
I have the same exact problem. Difference being I'm using an iMac with 10.7.5.
Same video board and monitor - ATI Radeon HD 6750M video card connected via DisplayPort to Samsing S24A850DW.
I've tried two different mini-DisplayPort to DisplayPort cables and no change.
I think I read that 10.8.3 might fix the issue. Anyone that can confirm that, or has another solution?

Powermac CD does not come out

Ever since i got this powermac, it constantly does not spit out cds when i eject. I tried Disk util, Open firmware, unix, finder, mouse at startup, and only mouse at startup works sometimes. Other times, it holds on to it continuosly.
Please help!
( I don't know if this has already been answered or posted)
it has been through a history of bad hard drive fixing itself, also.
Powermac G5 Mac OS X (10.4.7) Weird history of Crash Repair
Powermac G5 Mac OS X (10.4.7) Weird history of Crash Repair

There was a series of PowerMac's that got the wrong sized spacers for the superdrive and therefore the tray may not eject correctly due to height problems.
Contact Apple and give them your serial number.
If your handy you can switch out the superdrive yourself and Apple will just send you the replacement.

Pc does not come out of sleep mode, no display on monitor, no response from mouse or keyboard.

Computer acts as though it is in sleep mode, does not respond to keyboard or mouse input. Confirmed monitor is OK. turning power on and of does not fix this issue. any ideas on how this migt be fixed?

The key issue is power. Please use this guide to test the PSU.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

Hello,
I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
I need a easier and manual way to eject the DVD. Where is apple's help?
Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
Thanks

Thanks for asking, actually I just found a trick on a website.
It siad that restart MBP while holding eject button, I did it and DVD came out right away.
I hope that this works out for everyone.
But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
Thanks anyway dear.

Command "\" does not come out as accurate anymore

when i press the command of "\" to draw a line if i input 35 the line comes out to 34.925. Before it didn't do that. I'm sure i havent made changes but i need help

Gianni,
I am afraid you are haunted by the Align to Pixel Grid ghost.
You may select everything and untick Align to Pixel Grid in the Transform palette, and untick it for New Objects in the Options as well.

New 2nd Gen Macbook Pro does not come out of sleep mode overnight

I bought the new generation macbook pro last week and every night when I closed the lid of the computer, it would not wake up in the morning. I had to press the on button several times before it restarted. I then get a message that my computer was shut down improperly. It also had some serious trackpad issues.
I brought it in and they gave me a new one. At first they thought I was given the older machine by accident...but I was not.
Anyway, I took it home and the first night it was okay but the 2nd night it had the same problem. fyi..I migrated all my files from the old computer to this one and don't know if that could cause the problem.
Does anyone know how to fix this?
Omzone

I bought the new generation macbook pro last week and every night when I closed the lid of the computer, it would not wake up in the morning. I had to press the on button several times before it restarted. I then get a message that my computer was shut down improperly. It also had some serious trackpad issues.
I brought it in and they gave me a new one. At first they thought I was given the older machine by accident...but I was not.
Anyway, I took it home and the first night it was okay but the 2nd night it had the same problem. fyi..I migrated all my files from the old computer to this one and don't know if that could cause the problem.
Does anyone know how to fix this?
Omzone

Time Machine - What goes in does not come out

Time Machine seems to be quite adept at backing up. If I change a file it seems to figure it out and backs it up. But when I try to use the Time Machine application to restore it is quite confused. It goes into Star Wars mode but fails to "see" any history!
What could be the problem?

Rob Tholemeier wrote:
Pondini,
I know there is some relationship between my iMac's MAC and the sparsebundle. But how does TM on the iMac know the file name and location?
It varies, unfortunately, between Leopard and Snow Leopard.
In Leopard, the MAC address is included in the name of the sparse bundle; for sparse bundles created by Snow Leopard, it's in a file inside the sparse bundle, but outside the disk image.
Even if I mount a sparsebundle how does TM on my Mac know to use it for backup and/or restore?
It will only use it for backups if it matches your Mac's MAC address.
If you normally back up to an external HD connected to a Time Capsule or another Mac, then connect the drive directly to your Mac, Time Machine will continue backing-up to it. But the Time Machine display doesn't expect a sparse bundle on a locally-connected drive, and won't display it unless you mount it first.
In your situation you shouldn't have to mount it manually; it's worth a try so we can figure out what's wrong. You might even need the +*Browse ...+* option to see it.

Sound does not come out of iPod but can hear it with ear phones. What happened

CCannot get sound from iPod except from earphones. What has happened?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

Printing problems with Epson printer after snow leopard upgrade? I can print but text does not come out properly

I have upgraded my macbook to snow leopard and have spent ages downloading updated drivers etc. but still can't print properly to my Epson SX515W printer. I am losing half the text on each line and nearly all of the first few lines. Anybody experienced this and found a fix ?

I have upgraded my macbook to snow leopard and have spent ages downloading updated drivers etc. but still can't print properly to my Epson SX515W printer. I am losing half the text on each line and nearly all of the first few lines. Anybody experienced this and found a fix ?

Work item text does not come out

Hi Dear experts:
It's very kind of you to have a glance at this page. I encounter an issue that confused me.
In the title of User Decision title, I hardcode a description there and at the end of it I put a variable &1, in parameter I put a variable using F4 help. Also in the task( it is a standard task ), I using 'input variables' to insert the object type's attribute. When I execute the workflow, I load the data, the whole workflow completed successfully. But here when I access to log, I can't find the text that using the variables. Can any one help me? Thank you so much.

Hi Dear Dart:
Thank you for your time. Like you said, I created the workflow for testing. I executed it using SWUS. I load data that saved before. This is you said instantiate. Am I right?
I checked the 'importing' you mentioned in the task. In the Properties of the Object BUS1006, it is forbidden for us to maintain. And checkbox 'import' is flagged. But for 'Initial Value' is empty. I don't know if it matters as before I execute the workflow, I indeed have instantiate as you see the screen shot above. Thank you.

Audio does not come out of my left speak

Similar Messages

Maybe you are looking for