Audio does not embed in keynote file

Added audio to an existing Keynote presentation sometimes fails to 'stick' although embedding has been set in Preferences. It works as long as the .key file does not move relative to the source music but does not if I send it to the notebook I take for doing shows.

Am having perhaps a related issue. When I record narration and share to QT or even iWed, GarageBand won't take the Keynote with the narration, iWeb won't take it when you tell it to either copy sound, or mix sound. iWeb takes it only if there is no audio.

Similar Messages

  • CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

    Greetings,
    I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
    Any advice is appreciated.
    Thanks,
    Jeremy

    I had this problem and have found a solution / workaround:  my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
    Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage.  The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues.  Any sequences with that footage will now work and everything show be all good. 
    You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
    This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
    good luck!

  • CS6 The selected file cannot be linked because its type (audio) does not match the original file's t

    I understand there is another posting in this forum with the same error happening on CS5 and their solution had something to do with Quicktime.  Mine has nothing to do with this.
    I ran into this exact same problem in CS6 and I found that the issue is because I renamed the root project folder.  My folder structure is like this:
    Drive C:\
      -> [root project folder]
                -> [folder containing videos]
                -> MyProject.prproj
    By renaming the root project folder, I was no longer able to open up the project successfully.  It would get to certain clips and ask about where the clip was located.  Trying to re-link it to the correct file would result in that error (which makes no sense if you think about it).
    So my question is, is it intentional that the absolute folder paths are saved into the project file rather than relative paths?  Does it not make more sense if paths were saved relative to the root project path?  That way the root project folder could be renamed to whatever you want and it would have no effect on the project itself.

    I had this problem and have found a solution / workaround:  my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
    Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage.  The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues.  Any sequences with that footage will now work and everything show be all good. 
    You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
    This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
    good luck!

  • Audio does not sync on mp4 files

    After upgrade to QT 7.2 and iLife08, mp4 files (from Olympus camera) are no longer synced (timeshift audio/video). Can anybody help??

    See this post:
    http://discussions.apple.com/thread.jspa?messageID=5577097&#5577097

  • When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    I too have the same problem.  The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video.  Apple needs to fix this!!!!!!!!!!!!!!!!   its a joke,  my iphone is all messed up after the last update as well.  at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues.  Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!,  there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem. 

  • I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

    I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

    adobe42135678 wrote:
    the audio does not play when hosted on a website...
    When viewing in what browser?

  • TS1702 Keynote occasionally does not open a .pptx file (came in as an attachment). Keynote say 'not enough memory, yet half of my 64GB is available? File size is 2.5 MB.

    Keynote occasionally does not open a .pptx file (came in as an attachment). Keynote says 'not enough memory, yet half of my 64GB is available? File size is 2.5 MB.

    The Adobe PDF printer is no longer available in Snow Leopard. This is an announce to this fact at the entrance to the Acrobat Macintosh forum. The old methods for doing what you want will not work in Snow Leopard. I recommend you look at Quite Imposing. It can do everything you want and more. Alas, it comes at a price.

  • Selected file cannot be linked because its type (video) does not match the original file's type

    I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card.  (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
    In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
    The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies.  Usually only in the range of a minute or two.  The rest of the file is not imported at all.
    After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9.  I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
    For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video.  This was a file that previously would not import properly into Elements.  This suggested that my earlier installation of Elements must have been corrupted somehow.  At this point I was very hopeful that all was well.
    I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file.  I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet.  The MPEG export was successful and plays fine.
    However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project.  This time, Elements claimed the media was offline.  I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up:  "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)."  This was the same file I had JUST edited and of which I created an MPEG.
    I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio.  (This would explain why the error message said what it did, but not why the audio wasn't imported.)
    What in the world is going on with Elements???  I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI.  I find it very hard to believe that just installing Quicktime caused this.
    Some info on my system:
    System:  Asus P6T w/ Intel i7 920 and 12 GB memory
    OS: Windows 7 Ultimate
    Video Software:  Premiere Elements 9
    Capture Card:  BlackMagic Intensity Pro (PCI-e)
    Capture Software:  AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
    I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable.  Anybody have suggestions to help with this, so I won't have to migrate?

    mtnsports
    We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
    You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
    Based on the properties of the video what have you been setting as the project preset?
    Let us start here.
    More later.
    ATR

  • Folder does not appear in keynote on iPad after syncing

    After syncing a keynote file through iTunes, it appears in iTunes on my mac book pro but the folder of imported files does not appear in keynote on my iPad. I have tried creating file names with no spaces and using .key suffix, no joy. any ideas?
    Thanks

    you dont see that folder. It is a holding place for files. you import into the app using the "copy from itunes" command in the main file view of the app. (the little button that looks like an arrow pointing into an empty box will bring it up.)
    Your just copying from that folder you see in itunes. I use it as a location to "back up" my work as well. just "send to itunes" and you have a copy of your current state in the folder.
    Jason

  • Edge animate cc Audio does not play on mobile phones & iPod though it plays perfectly on an mac pro

    I have uploaded an edge animate cc published html with sound. The html file opens perfectly on my mac pro safari browser perfectly with audio. But when I open the same file on my iphone5 the file opens but no the audio does not play. What wrong does anybody have an answer?

    You are right. But there detail. If Online audio will be downloaded to this user interaction. Depending on your animation will all be out of sync with the audio. For the timeline will run before. I do not know how to do but needed to put a stop to that timeline only run when the audio is downloaded. I had problems in IOS and Android with audio using adobe edge previous version before they even have audio support. Used Edgehero who answered my expectations very well. Only had this same problem but it was solved this way.
    Here's a link http://www.edgehero.com/ForumRetrieve.aspx?ForumID=94&TopicID=14286&NoTemplate=False

  • My audio does not work...

    My audio does not work. it says it's enabled, the troubleshooting tools i've used (several) find no problems, and yes, I have the latest drivers.  When I start Windows Media Player, it says: 
    "Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
    If I click Start, Control Panel, Sound... nothing happens.  nothing.  No error message, no window starts.  Could it be my audio card failed?

      Ok, it takes 3+ days to back up 400+GB of data, wipe Windows, reinstall all my software and restore all my data.  All that drama is not worth repairing a sound card.  Besides, we need to fix this for real, not duplicate the conditions that caused it to fail in the first place.  In the future, it's best not to bring up that option at all.  (We both know that rarely solves the issue permanently.)
    I'd simply replace this so-so HP before I put myself in a position to lose 3 days of work.
    However, I am still interested in finding a solution to this problem.  Do you think HP is capable of solving this?  If so, I'll look for a more detailed model number when I get home.
    Thanks,
    Gary

  • Isight audio does not record with video

    isight audio does not record with video

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • Audio does not load with video

    The audio does not load with video in 12?

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

    save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

    When I open is adobe acrobat I get this message.
    "This is an Adobe® Illustrator® File that was
    saved without PDF Content.
    To Place or open this  le in other
    applications, it should be re-saved from
    Adobe Illustrator with the "Create PDF
    Compatible File" option turned on. This
    option is in the Illustrator Native Format
    Options dialog box, which appears when
    saving an Adobe Illustrator  le using the
    Save As command."

  • When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

    Hi
    I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
    but does not change the remote file i.e.Index.htm, or three stages1.htm.
    My Localroot folder is C:\Gods Plan Web\
    The site map layout is C:\Gods Plan Web\Index.htm
    The folder for the remote site is /public_html/
    Should the local root folder mirror the remote site, i.e./public_html/
    if this is so, what should I put into the
    (a) Local Root Folder box?
    (b) site map layout box?
    The FTP is performing well other than changing the intended file.

    You should be uploading only the contents of your local root to the public_html folder (remote root).
    The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
    Site - Whatever you named your site
         index.html
         images
         pages
              page1.html
              page2.html
    If you have any folder between Site - and the index.html page, like...
    Site - Whatever you named your site
         mywebsite
              index.html
    It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
    www.mydomain.com/mywebsite
    public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
    If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

Maybe you are looking for