Audio does not encode when importing MPEGs

Hello,
I am working in Flash 8 for the Mac. I am trying to import an
MPEG file but it does not give the ability to encode the audio
track. The video file does have an audio track and I was able to
import this very same file last week with success.
As a result, audio is no longer encoded from any MPEG I
attempt to import. The video works fine. Just no sound. Is there
something I'm missing suddenly? Thank you.
Steve

Similar Messages

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

Audio component not apearing when importing AVCHD .MTS files

When importing AVCHD .MTS files into Premiere Pro the Audio component is not available (also in After Effects and Media Encoder)
What am I doing wrong :/

You could most likely convert them using a program like 5DTORGB, and then pull them back into Premiere. Although there is a chance this won't work, however in most cases I find it usually does work. Just be prepared to lose your metadata.
If your on a PC I'd recommend downloading their beta version it will allow you to transcode your AVCHD to ProRes HQ.
http://rarevision.com/5dtorgb/
All you have to is provide them a correct email address and they'll send you a download link. When you transcode though keep in mind that it's going to make your file sizes much much larger, however this because ProRes is much less compressed than AVCHD video is. You do need to keep in mind though that ProRes HQ is visually lossless. If you chose to use another free converter program you'll most likely get stuck chosing a lossy format. Another nice thing though, is that it works on MAC too. Your shooter needs to know not to do this again though, because as you already know at this point. It can cause big issues...

Pasted image does not show when imported to AI

Mac OS 10.4.11 - Acrobat CS4. I made a contact sheet of images in Bridge which was saved as a PDF. In Acrobat I pasted another image (different size ratio) and saved again. However, when I placed the image in Illustrator the pasted image did not show, only the original contact images. It does not show at preview level either, but when the PDF is opened it is definitely there. I tried to 'flatten' it but cannot find a option that works.See attached file.

I would love to help you, but I'm totally lost as to what you are trying to do.
Here are my questions:
Mac OS 10.4.11 - Acrobat CS4.
There really isn't an Acrobat CS4. There is Acrobat 9 that shipped with CS4. But let's go one.
I made a contact sheet of images in Bridge which was saved as a PDF.
OK, that's good, I understand what you're doing.
In Acrobat I pasted another image (different size ratio) and saved again.
OK, this is where you lost me. Acrobat does not have a paste image ability. Exactly how did you get that image onto the Acrobat page? You copied from where? You pasted how? This is totally screwey.
However, when I placed the image in Illustrator the pasted image did not show, only the original contact images.
Placed what image? The original PDF contact sheet? Why are you trying to put it into Illustrator? There's no reason I can think of to do such a thing.
PDF is usually the final output form. It isn't a page layout tool to place into other programs.
It does not show at preview level either, but when the PDF is opened it is definitely there.
Still trying to figure out what you talking about.
I tried to 'flatten' it but cannot find a option that works.See attached file.
You have totally lost me. There is no "flatten" in PDF? That's in Photoshop? What are you doing???

How to change a portrait movie taken on an iPad 2 into landscape frame in iMovie so movie does not stretch when importing to iMovie?

I have a movie taken on my iPad 2 taken in portrait framing. When importing it into iMovie '09, it gets stretched into landscrape framing. Is there some way to import it into IMovie so it doesn't get stretched? Thanks, Matt

I have a movie taken on my iPad 2 taken in portrait framing. When importing it into iMovie '09, it gets stretched into landscrape framing. Is there some way to import it into IMovie so it doesn't get stretched? Thanks, Matt

Video does not play when imported from FCP

When I import a clip from FCP into motion the clip opens up however only one frame shows up in the motion viewer. When I press play, there is no video..only that particular frame that was showing.
The media tab shows the .mov file, and plays it in seperate window when i double click on it.
Thanks for helping me out.

How do you bring the file into Motion and what file are you actually opening in Motion?
Are you exporting your FCP project as QT? or
Are you sending your FCP project to Motion?
Regards,
Hisham

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

When importing MPEG files into Premiere Pro CS3 the audio sequence is missing.

We have two computers running Premiere Pro CS3. Our computer most recently installed with PPCS3 will only import an audio sequence with the MPEG video file when I extract the file directly from the DVD. When I take the video folder from the DVD and drag to my Desktop, importing to PP from the desktop, it will only import the video sequence; audio does not appear. What would cause this happen and how can I fix this? It's too time consuming to continuously use my DVD Extractor.

1st, that old program has a different forum http://forums.adobe.com/community/premiere/premierepro_previous
2nd, To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS1501 Image Capture does not launch when I connect my iPhone to my iMac and open iPhoto. No "Prefernces" is offered under Image Capture. I cannot import photos to iPhoto.

Can't import photos from iPhone to iPhoto. Image Capture does not launch when iPhone is connected to my iMac and iPhoto is open. There is no "Preferences" option offered to click when in Image Capture.

This helped me. It is advice I found from a user named Carlosmara. First make sure iPhoto is closed and your iPhone is not connected. Then, as Carlosmara stated in his post,
"Go to your Library/preferences and delete the file com.apple.iPhoto.plist
IPhoto should recognized the iPhone again."
The file in question is under your user folder.
I then restarted my mac and plugged in the iPhone so that it would sync. After the sync, when I opened iPhoto, my iPhone was recognized and I could download the photos perfectly.
Hopefully this will help you as it helped me

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

You're in the wrong forum. Post to iPhoto for iLife, not iPhoto for iOS.

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox opened

try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Audio does not encode when importing MPEGs

Similar Messages

Maybe you are looking for