Audio Does not export with ideo in quicktime conversion

I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
is there a way i can reset all settings without adjusting my video clips?
Sound settings
Format: Lubear OCM
Channels: Stereo (L R)
Rate: 48.0000 hHz
Render Settings:
Quality: Normal
Linear PCM Settings:
Sample Size: 16 bits
Checked: Little Endian

Hi(Bonjour)!
Does the audio play when you run sequence?
Did you toggle off the monitor icon at the left side of timeline for audio track?
When export to quicktime conversion, select quicktime movie and click OPTION.
From this point, you should see a checkbox for SOUND. Be sure to check it ON.
Michel Boissonneault

Similar Messages

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • Isight audio does not record with video

    isight audio does not record with video

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • Audio does not fit with video FCPX 10.1.3

    Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
    Thanks

    I tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
    It is difficult to explain

  • Audio does not load with video

    The audio does not load with video in 12?

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • Using GB'08 to create Chapters for iMovie'08 -- audio does not export

    After fighting though learning Final Cut Express (oops I mean iMovie '08), I got a movie together. Then I wanted chapters, so I found a great article (http://imovie08.blogspot.com/2007/08/how-to-add-chapter-markers.html) showing that the only way to make them in a logical way was via GarageBand'08.
    However, when I send the movie to iDVD, the audio does not make it (silent when I play the movie - either in preview mode or on the burned disc). Furthermore, I tried to "Export Movie to Disk" to see if GB was not outputting or if it was an iDVD issue of receiving. I found that the export also came over with no audio.
    Please advise!

    I am having the same exact problem. I have Final Cut Pro on my production computer at work, but I wanted to do some personal stuff at home on my MB Pro. I have like 15 old family 8mm home videos that I want to convert to DVD's for my parents for Christmas, so I used some of my hardware for A to D conversion to get these marathon 2 hour movies on my ext. Hard Drive. But of course you can't make chapter markers in the new iMovie '08, so I have to export to "media browser" and then switch to GarageBand to do this simple task. But unfortunately when I "share" from GarageBand to iDVD, disk, or even iTunes I get absolutely no audio. Ridiculous.
    Not to mention the fact that these home videos are two hours long and it takes a freakin hour for it to compress/export just to find out there's an issue. And even before I realized there was no audio, I was having an amazingly awesome time in iDVD as it was lagging so badly that I considered putting my TV on to pass the time while I clicked and held on one of the folders waiting for it to highlight so I could move it. Then it was great to find out that all that time I spent in iDVD was in vain because there was no audio on the movies anyways!!!! yaaayyyy!!!
    Obviously other people have presented this same GarageBand movie sharing audio issue and have received no good solutions as of yet, so I don't even know why I'm here posting this. It's 4:00 AM, and I've been fussing with this crap for over 8 hours now. I'm just going to do it all at work on more capable software (Final Cut, DVD Studio).
    I just figured that I didn't have to do anything special to these home-videos editing-wise, why not just take advantage of my "cool" new iLife software? And do it on my spare time at home? Why not? Because they've made iLife so retard-proof that it's self destructing before my very tired eyes.
    iLife? more like cryLife.

  • TS1718 Movie audio does not sync with movie

    Hi,
    The movies I have bought through iTunes store does not work properly. I bought two last week and when trying to play them back over the weekend, the audio is not sync'd with the movie playback. I have a Winodws 8 laptop and enough space for the films to be played. The software is all up to date and can therefore see no problem as to why this should not be working. Does anybody know of any way to resolve this to allow me to watch the films?
    Thanks,
    G

    Hello grs1989,
    Thank you for providing the details about the issue you are experiencing with audio out of sync with video in iTunes.  I found an article with steps to address issues with audio and video playback being out of sync:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

    Hey Volks,
    when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
    im very thankful for any idea...

    Hi Dast Media,
    Have you resolve the multi channel export?
    I have the same problem...(the export it's ok but i hear only the first two tracks)
    i need to export  a MXF file with 8 tracks, 6 stereo and 2 mono.
    Thank you for help!

  • Keynote does not export music into a Quicktime Movie

    I created a 75 frame Keynote 08 presentation with looped music and exported it into a Quicktime movie, but the music does not play. The audio does appear in the Quicktime "Properties" but does not play. Help!

    My apologies! I went about a VERY lengthy search and just did not find anything to my satisfaction other than people stating that they had the same problem. Just search for phrases like 'Keynote music export QuickTime' and I guarantee you'll find a lot of results. My best bet was to export the movie (went fine) and then to import the movie into iMovie, add the soundtrack and re-export. My main problem was figuring out the best format from iMovie. Choosing the wrong one gives absolutely horrible movie quality compared to the Keynote export.
    The frustrating thing is that you can't tell the movie quality until a, oh, 15-30min rendering of your movie depending on the size and trying that with several setting arrangements adds up to too much time for me. For my situation, I was able to just play the movie and play a cd on a boombox in the background. It was not my desired choice but after hours and hours of trying I gave up...
    Sorry I'm not more helpful. It just looks like this is a bug Apple needs to fix.
    -John

  • HT5409 AVCHD audio does not play with the video clip

    iPhoto does not import, or even see the clips, and when QuickTime played the clip off the card itself, no audio is present even though the inspector shows stereo.              

    Morning Remigijus Biciunas,
    Thanks for using Apple Support Communities.
    Some devices don't appear in the regular import view of iPhoto. You can still use AVCHD video from these cameras by dragging and dropping or menu-driven imports.
    For more information on this, take a look at this article:
    Using AVCHD video with iPhoto '11
    http://support.apple.com/kb/HT5251
    Hope this helps,
    Mario

  • FCPX clip audio does not export, "Jingles" do.

    When exporting my project from FCPX to Quicktime, the audio from my clips does not import but the jingles I used from the FCP media library do export.
    I get "Quicktime error: -50"
    I do have the audio portions of the clips overlapping each other. Maybe this is why?
    Could it be an issue of permissions? I ran disk permissions.
    Thanks,
    Grace

    Sys prefs Sound -> Output -> Internal Speakers... Built-in //  Settings for selected device: The selected device has no output controls  //  Output volume:   (slider)
    When headphones in, Sys prefs Sound -> Output -> Headphones ... Headphone port  //  Settings for the selected device:  Balance: (slider left-right)  // Output volume:  (slider)
    Channel configs:
    Media specs: Apple HDV 1080i60, 1440 x 1080, 16-bit integer (Big Endian),  Stereo (L R), 48.000kHz
    - Tisha

  • Audio does not sync with videos

    Sometimes when I download videos from iTunes, the audio and the video are not in sync. This has only started to happen since I upgraded to iTunes 7. Is there a way to fix this or is it a problem with the download process?

    David, I'm monitoring the audio through the line out of my Mac Pro, using a small pair of powered computer speakers.
    It's a system I've been using for years, and haven't had a problem w the audio waveform not matching the audio I hear, until now.
    Thanks for your response!

  • Green screen keying layer does not export with rest of media in apple pro res 422

    green screen keying layer doesnot export with other media in the sequence when using apple pro res 422

    You really will need to explain this a bit more carefully, pretend we have no clue what you're doing, and phrase this in the form of a question. For all we can tell, this is exactly the result you wanted and you're just telling us about it.

  • Audio does not sync with its own waveform.

    Hi Everyone,
    I captured an audio track from a DAT tape into FCP. No video yet, just audio.
    I noticed the audio that I hear is 2 frames ahead of the corresponding wave form. Any ideas on how that could happen and how to correct it?
    I can re-capture the DAT if needed.
    Thanks!

    David, I'm monitoring the audio through the line out of my Mac Pro, using a small pair of powered computer speakers.
    It's a system I've been using for years, and haven't had a problem w the audio waveform not matching the audio I hear, until now.
    Thanks for your response!

  • On export audio does not align with video

    So I am learning pre for school and we have to place audio and video together. When I view this in Pre it plays fine but when I export it as quicktime they don't match ie audio 1 and video 1 are playing and it fades to video two and still playing audio 1 rather then audio 2.  Now the teacher is no help (go figure), the school support says its adobe issue and I can't pay adobe to help me pass my assignments. lol. Any help is appreciated.
    thanks

    Here are the requested images; also I don't want the audio to start exactly at start this the tiny space from  video start to audio clip but then the output is all off.

Maybe you are looking for

  • How to delete records from standard maintenance view

    Dear Sir/Madam,         i want to delete records from standard view " v_mmim_rep_cust " This is a standard maintenance view , used in MBLB report. here i found the records with different report name but same fields as shown below... REPORT           

  • ACR (CS5 Bridge) not opening all RAW files

    I upgraded to CS5 last week and I'm having a problem with processing some RAW files. If I select ALL the images in a folder in Bridge and right click to open in ACR it doesn't open ALL the images - there are missing images and I cannot for the life o

  • Using EL How to Write a Customize tag

    I want to write a tag wich takes input and output as it is.Like when i pass an primitive types then it directly pass no transfer as we are puting "" literial to the values and pass it. For Example: <fun:add i1=10 i2=20 /> check my code as i write tld

  • Intergration with DB2 stored procedure

    I am using Database adapter to integrate with DB2(version 8) to call a stored procedure,however i receive a message "The adapter configurationwizard doesnot support DB2 stored procedures." I am using Jdeveloper 11g.Is there any work around or any oth

  • IMac display mirroring

    I have an iMac G5 which is having some issues with video mirroring. When I try plugging a TV into it via the Apple video adapter, the imac display flickers, indicating it has adjusted to the new display, but there is no image on the TV. The System Pr