Audio does not resume with ios 7

i downloaded ios 7 for my iphone 5 and have noticed when i play music, turn the music off and go back it reshuffles and starts new. it is also happening when i connect my phone to my car to play music. i connect the phone, drive, run an errand and restart and the music has reshuffled. what happened to resume playback where left off for audio?

+1.
The only founded solution is to use playlists.
When i play music from playlist - it returns on its position after unplugging/plugging iphone.
But it's very strange and idiotic thing that it doesnt work when you play albums or genres. It is really annoying.
Listening to music in car from iphone is one of the important thing for me, because in same time you can charge the phone and dont need to mess with all these mp3s and usb flash drives. So if Apple won't fix these troubles with music, the next my device will be on Android.

Similar Messages

PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2

Well this is upsetting. I created a PDF form with several pages of the same form (it's a travel log).
My hoping to use Adobe Reader to complete the form and save back as a week at a time won't work.
I created the form using Acrobat Pro 9 from CS5.
Does anyone know if a PDF form in a Portfolio should work with Adobe Reader on the iPad2/
Also, what can I use that works with forms as a portfolio?
Ken

Ken,
please could you describe your workflow. It might help to find some solution. Also it would be great if you can share a sample of your document. Please email it to [email protected] with the reference to this discussion "PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2"
thank you.

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

After watch a video in "full screen mode" and the video shrinks back into the eBook view, HALF of the TOP Title Bar DISAPPEARS, But it does not happen with ios 6.1

After watch a video in "full screen mode" and the video shrinks back into the eBook view, HALF of the TOP Title Bar DISAPPEARS, But it does not happen with ios 6.1

The Mac has never needed "Full Screen". It has done multiple screen Extended Desktop since 1987.
Full screen is an iPhone feature, carried into this verion with the mult-touch gestures and other so-called "unifying" features.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Isight audio does not record with video

isight audio does not record with video

Welcome to the forum.
Can you provide us with a bit more information, please?
What OS version are you using?
What are the full specs. of the AV file, that is not Importing with Audio?
What Project did you set up, at New Project?
Exactly what steps were used to Import that AV file?
Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
Good luck,
Hunt

Audio does not fit with video FCPX 10.1.3

Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
Thanks

I tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
It is difficult to explain

Audio does not load with video

The audio does not load with video in 12?

Welcome to the forum.
Can you provide us with a bit more information, please?
What OS version are you using?
What are the full specs. of the AV file, that is not Importing with Audio?
What Project did you set up, at New Project?
Exactly what steps were used to Import that AV file?
Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
Good luck,
Hunt

Audio Does not export with ideo in quicktime conversion

I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
is there a way i can reset all settings without adjusting my video clips?
Sound settings
Format: Lubear OCM
Channels: Stereo (L R)
Rate: 48.0000 hHz
Render Settings:
Quality: Normal
Linear PCM Settings:
Sample Size: 16 bits
Checked: Little Endian

Hi(Bonjour)!
Does the audio play when you run sequence?
Did you toggle off the monitor icon at the left side of timeline for audio track?
When export to quicktime conversion, select quicktime movie and click OPTION.
From this point, you should see a checkbox for SOUND. Be sure to check it ON.
Michel Boissonneault

TS1718 Movie audio does not sync with movie

Hi,
The movies I have bought through iTunes store does not work properly. I bought two last week and when trying to play them back over the weekend, the audio is not sync'd with the movie playback. I have a Winodws 8 laptop and enough space for the films to be played. The software is all up to date and can therefore see no problem as to why this should not be working. Does anybody know of any way to resolve this to allow me to watch the films?
Thanks,
G

Hello grs1989,
Thank you for providing the details about the issue you are experiencing with audio out of sync with video in iTunes. I found an article with steps to address issues with audio and video playback being out of sync:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thank you for using Apple Support Communities.
Best,
Sheila M.

Playing Slowmotion video over airplay does not work with ios update!!!!!

after upgrading last ios , airplay to shoot slowmotion video does not work.
I was expecting it to be fixed with recent update, but still not working!!!
I use it for education at my clinic - which is essential, and how come apple does not fix it at all?
or apple should give downgrade option at least.
FIx it, fix it, fix it!
Main purpose of puchasing ipad air2 was to airplay slowmotion video to big screen and i am quite disappointed with my purchsing ipad air 2.

As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

HT5409 AVCHD audio does not play with the video clip

iPhoto does not import, or even see the clips, and when QuickTime played the clip off the card itself, no audio is present even though the inspector shows stereo.

Morning Remigijus Biciunas,
Thanks for using Apple Support Communities.
Some devices don't appear in the regular import view of iPhoto. You can still use AVCHD video from these cameras by dragging and dropping or menu-driven imports.
For more information on this, take a look at this article:
Using AVCHD video with iPhoto '11
http://support.apple.com/kb/HT5251
Hope this helps,
Mario

2960X-48FPS-L does not boot with IOS 15.2-2E

Hello,
i got a bunch of 2960X switches. But some of them do not boot with the new IOS Version. The older 15.0-2 EX do boot.
Does anybody have a clue why this happens? During the Bootprocess it just stops to load:
File "flash:/c2960x-universalk9-mz.152-2.E.bin" uncompressed and installed, entry poin0x3000
executing...
Loading "flash:/c2960x-universalk9-m
Thank you for your help.

On the ones that cannot boot 15.2(2)E, can you break the boot cycle using the "Mode" button?
If the answer is "yes", then try the following:
1. Copy the IOS BIN file from a working switch to a USB flash drive;
2. In ROMmon, force the switch to boot the IOS from your USB flash drive;
3. If it does not work, try a different IOS, like the EX3 for instance. Try the same process, boot the BIN from your USB flash drive.
4. If it works, try a different IOS, like EX3, for instance. Downgrade the IOS from 15.2(2)E to EX3 and see if the switch can boot normally.
This exercise will determine where the fault is coming from: IOS bug or a hardware batch problem.
To determine if you'e got a hardware batch problem, you may need to look at the serial number of the switches working and not working. From left to right, look at the 4th, 5th, 6th and 7th numerals. This will determine the year and month your appliances were made.

Audio does not sync with videos

Sometimes when I download videos from iTunes, the audio and the video are not in sync. This has only started to happen since I upgraded to iTunes 7. Is there a way to fix this or is it a problem with the download process?

David, I'm monitoring the audio through the line out of my Mac Pro, using a small pair of powered computer speakers.
It's a system I've been using for years, and haven't had a problem w the audio waveform not matching the audio I hear, until now.
Thanks for your response!

RTMP Live Stream does not resume with Spark VideoPlayer Component

Hi all
The Flex 4 framework brought along the VideoPlayer component, which supposedly can automatically choose the best stream in terms of bitrate from a list of available multi-bitrate streams, play live videos and everything.
See http://help.adobe.com/en_US/flex/using/WSc78f87379113c38b-669905c51221a3b97af-8000.html for some information about it.
Here's a working example for an MXML application under the Flex 4.1 framework:
<s:VideoPlayer width="100%" height="100%">
    <s:source>
        <s:DynamicStreamingVideoSource streamType="live" host="rtmp://88.87.56.214:1935/live/">
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="19200"/>
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="9000"/>
            <s:DynamicStreamingVideoItem streamName="euronews_tmo_h.stream" bitrate="3600"/>
        </s:DynamicStreamingVideoSource>
    </s:source>
</s:VideoPlayer>
The streams are valid and they play. However, I'm bumping into a problem when the stream is paused: it will not resume.
The player state alternates correctly between 'playing' and 'pause' when you keep clicking the play/pause button. However, once the first stream pause(or stop) occurs, the image and sound seem to freeze...forever.
Any help ore guidance are most appreciated!

I'm also facing the same problem.. Any developments in that ?

Audio does not resume with ios 7

Similar Messages

Maybe you are looking for