Audio doesn't export with the video.

I am using Premiere CS4 to edit a group of clips together (a couple of them with audio.) I can hear the sound when I play them on the premiere file but not once it is exported.
My audio settings are: AAC, mono, 48khz, high, and the export audio checkbox turned on. I also tried with AAC version 1 and 2 but got the same results.
The video codec I'm using is H.264, if that matters at all, but I tried quicktime too and it didn't work either.
Any ideas what might be the problem or what am I missing?

I thought I recalled reading something when CS4 was first released that indicated that its codecs process files differently than in the past and therefore it would be more critical in CS4 to keep all of your presets and sources matching more closely.  That in combination with Bill's comments got me thinking that there was probably something to it.  It prompted me to run some quick :30 tests on new projects with the same issues.
I used both 48 & 44.1 project presets, 44.1 .mp3 and .wav source files, and 48 & 44.1 export presets.  I also threw a video track on there for comparison sake.  I expected the mixed source/presets to fail and the uniform source/presets to succeed.  Wrong.  End result was that everything exported as one would hope, error free and all without pre-rendering the timeline.
So, go figure.  I guess I can only assume that there was some kind of hiccup/corruption in my original project file that prevented the audio from exporting like it should.  I am never comfortable with that answer though.  I need everything to make sense if I am going to sleep at night.
-gcs01

Similar Messages

  • I am trying to import video and the audio doesn't upload with the video. Help.

    I am trying to import video and the audio doesn't upload with the video. Help.
    I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB).  The video imports but not the audio, what do I do?

    What are you capturing from?  You may not hear the auido as it's captured but it will be there.  After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip?  If so then go to "View" then "Audio Playback"  and set it to 'Built-in Output" if you're monitoring audio through the computer.

  • The Audio Doesn't Sync with the video

    Hi
    I'm a complete novice to captivate and I'm trying to capture
    an area within a IE web browser. I choose to add the audio at the
    same time as doing the video.
    What I get however is the audio does not seem to keep up very
    well with the video capture.
    In addition and perhaps this may be connected, if I click on
    a link on the webpage I am viewing and scroll up/down the page,
    captivate doesn't seem to be able to cope with it.
    When I play back the movie, I will see mouse hovering over
    and clicking where the relevant button would be had the video
    caught up, it's a couple of second behind.
    So I guess I have two problems.
    I apologise if I'm not providing all the correct information
    I would also be happy to create a captivate file and upload it to
    explain more clearly what the problem is.
    Regards
    Simon H

    Well I seem to be able to solve the video not keeping up with
    the scrolling by opting for the "record at high full motion "
    option
    I still seem to have the audio problem but what I also can't
    solve is that the mouse movement on the screen only shows when you
    actually click on a button, I want the mouse to move around so I
    can point to certain areas on the screen but without actually
    clicking on the links and taking the user away from the current
    view.
    Is that possible or does activate only allow the mouse to be
    showing moving around the screen if your clicking on an
    object

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

    Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
    Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
    The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
    Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
    I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
    Any way to fix it?

    only $99, i thought it was closer to $175.

  • When importing a Quicktime file into iMovie the audio is inconsistently synchronised with the video. Any ideas?

    I record using Quicktime and the built in webcam on my MacBook Pro. When importing the file to iMovie the audio is inconsistent in its syncronisation with the video. Any ideas?

    This is probably caused by the internal webcam on Apple devices being optimized for FaceTime rather than for movie making. In FaceTime, the goal is to transmit the information using a little bandwidth as possible, so the video will be recorded at a variable frame rate. The frame rate will get low if you are still, and will speed up if there is a lot of motion.
    To fix, I would suggest that you use a free app like MPEG Streamclip. Drag the clip into MPEG Streamclip and export it out at a constant framerate.
    If it is an HD movie, I suggest exporting it from MPEG Streamclip using FILE/EXPORT TO QUICKTIME. Choose Apple Intermediate Codec as your video compression. For sound, choose uncompressed 48khz. That should work, but I can't test it right now. If MPEG Streamclip does not work for you, let me know and I can recommend another free tool.

  • How do I get the audio track to stick with the video track?

    Whenever I move or cut the video track I want it's audio track to move or cut with it, how do I get them to stay together so I don't have to do double work?
    This should be an easy one...Let's see who can answer first.....ready, set, GO!

    Sounds like Linked Selection is switched off. Check the button in the upper right of the timeline window. Shift-L will toggle it off and on.

  • HT5409 AVCHD audio does not play with the video clip

    iPhoto does not import, or even see the clips, and when QuickTime played the clip off the card itself, no audio is present even though the inspector shows stereo.              

    Morning Remigijus Biciunas,
    Thanks for using Apple Support Communities.
    Some devices don't appear in the regular import view of iPhoto. You can still use AVCHD video from these cameras by dragging and dropping or menu-driven imports.
    For more information on this, take a look at this article:
    Using AVCHD video with iPhoto '11
    http://support.apple.com/kb/HT5251
    Hope this helps,
    Mario

  • I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

    I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

    Hello there, graciecloyd.
    The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    Hello Gemese,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Final Cut Express won't capture audio with the video anymore, why?

    I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

    First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

  • When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    I too have the same problem.  The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video.  Apple needs to fix this!!!!!!!!!!!!!!!!   its a joke,  my iphone is all messed up after the last update as well.  at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues.  Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!,  there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem. 

  • OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    Love the Adobe products first. OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    If you import the PPT deck into Captivate it will not bring the audio from Presenter. But you can import it into Captivate after the slide deck has been imported. The audio files aren't necessarily named in a logical fashion in the source files for the presentation, so I would recommend that you publish the presentation locally and then find the 'data' folder in the published output and the audio files will be named in a way that you can infer the slide they are associated with. Not the simplest proceedure but it should be pretty painless.

  • I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

    I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

    We didn't do that video. Why are you asking here?
    Those videos are usually outdated....
    Use the current tools etc., in the iOS Dev Center and iTunes/iTunes U ~ Stanford.

  • Audio doesn't sync with video.  Any suggestions?

    When I watch a TV show or movie on iTunes the audio moves much faster than the video.  Very distracting.  Suggestions for fix?  I have the latest version of iTunes.

    Try the tips in this Apple document -> iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    If they don't work, try downloading something else from the Free On iTunes section of the iTunes Store.

Maybe you are looking for