Audio doesn't reverse correctly in reverse play

Hey All,
I don't know if any of you have encountered this problem, but I can't find a similar topic on the forum.
When I use the "J" key to reverse play my timeline, the audio starts playing in reverse like the video does for about half of a second. However, without pressing any keys, the video continues to play in reverse (like it should), but the audio then begins playing forwards (which is my problem), while it should have continued to play in reverse.
I am running the Production Premium CS3 suite with a Matrox RT.X2 LE card. I'm thinking the audio issue may be Matrox-related, but I thought I'd check on this forum to see if anyone has had a similar problem.
Thanks,
Kevin

Jim,
The main reason this is a problem for me is that I do a lot of logging of interviews. I like to be able to scrub both backwards and forwards in order to find the ins/outs of the take. If scrubbing backwards plays audio forwards, then I have to rely on lip movement rather than audio in order to find the end of a take.
Scrubbing forwards using "L" works correctly for 1x, 2x, and so on. But -1X using "J" plays the audio at +1x rather than -1x.
Let me know if you need further clarification.

Similar Messages

  • InDesign audio doesn't play when exporting to swf.

    I created an InDesign CC document with an audio file, MP3 format. I have the audio file and poster which shows and plays when exporting to an Interactive PDF. When I export the same file to SWF the audio and poster are not there although the audio files are the Resources File. How do I get the audio and audio poster in the swf file?

    Most probably by correctly setting up the SWF export option or, if you have Acrobat, by converting the PDF into SWF.

  • In iMovie, audio doesn't play on movie preview

    Hello,
    I got iMovie 10.0.6 yesterday. It worked fine for a few minutes, but afterwards, I couldn't hear the audio in my movie. However, if I went into the event the movie it was in, I could hear the audio on preview. I tried exporting, and the audio was working perfectly there too, but not in the movie preview itself.

    What version of OS and Keynote?
    Audio doesn't play on a single slide when exported into Qtime
    Are you trying to play audio over the complete presentation on one slide or a range of slides?

  • Ipod audio doesn't keep up with video! help!

    ok. ive got a 60 gig. ipod with a imtoo file converter. almost every time i convert, the file's audio doesn't keep up with the video. for example, at the end of the movie, the audio keeps playing! help plz.

    "I think the best one to use is called videora."
    Maybe you should first visit "Videora's" Website and read the Bug list...Things that are not correct":
    Known Bugs
    Audio/Video sync
    Problem - Output files can be out-of-sync. While no set pattern has been established, it seems to be more frequent with input files of 23.976 fps, non-DVD rips, and WMV/MPG filetypes.
    Workaround solutions - Try the custom option '-async 1'. If the disconnect gradually increases over time, setting 29.97 fps sometimes gets rid of the problem regardless of the input fps. You can also use AviSynth to assume the FPS and have the audio sync to that. If it's a sudden disconnect, check your VOB Cell settings in DVD Decrypter settings per this thread. Otherwise, test with an AviSynth script per the DaProphecy's method in the FAQ. For non-DVD files, PSPVideo 9 may be a good short-term solution until the converter stabilizes some more or try something like AviDemux.
    Audio track not getting picked up
    Problem - The IFO stream rip is fine, but the converted file has no sound. The debug info showed to audio track getting picked up. The most obvious case with this is the Madagascar DVD.
    Workaround solution ideas - Test with an AviSynth script per the DaProphecy's method in the FAQ (untested). Use a different DVD ripper.

  • MousePressed doesn't work correctly

    Hi readers
    I'm working on a game that runs as applet and as Application, it works fine.
    in my code I have a block to reverse some movement on the event of general mouse click.
    I've put my code in mousePressed method after implementing "MouseListener" interface.
    the problem is! it doesn't reverse the movement.
    I've tried putting a JOptionPane message Dialog to make sure the method is being called.
    when I click on the needed component, The Message dialog is show twice and the movement is reversed after the first one is shown.
    What is the problem?

    sounds like the fan belt is looseMaybe the mouse got tired and stopped running in his little wheel!

  • WRT54G version 6 - router setup screen via Internet Explorer 7 doesn't display correctly

    Hi,
    I've just set up my WRT54G router.  I'm able to connect to the internet and I'm able to connect directly to the router via IE but the setup screen doesn't display correctly.  I've tried resetting the computer and updating the firmware but it still doesn't display correctly.  Almost all of the text is missing except for the Linksys logo and a few drop down menus.  Any help/suggestions would be great, thanks.

    Hi gang,
    There a number of things that you can do to solve this problem but most of them involve changing the rules that you have already configured in your ZoneAlarm profile. My preferred solution is to:
    -unplug your router from the WAN (why not?)
    -turn off zone alarm
    -access your router's administration page at http://192.168.1.1
    -find the admin page where you can switch admin access from http to https
    --- **save your changes !!**
    -reboot your router
    -plug the WAN cable back into your router
    -turn ZoneAlarm back on
    -access your admin page at https://192.168.1.1 ( note the 's')
    Bob is your sister's brother! Your admin page should work as it is supposed to. Your router and ZoneAlarm should be playing nicely together. You haven't borked your finely tuned zonealarm rules. You were going to bookmark your admin page anyway, and if you want to allow remote administration, you would want to use https anyway. Nothing is broken and you fixed two things. "Its a good thing."Message Edited by ubuibi on 12-27-200609:10 AM
    There are really only 10 kinds of people in the world;
    Those who understand binary and those who don't.
    ubuibi

  • After effects CC export to premiere pro CC: audio doesn't match

    Hello!
    I am making an animation serie for Belgian TV. They need me to export  only my audio from premiere (I make the animations in after effects).
    They need OMF format.
    When I export from after effects CC > Premiere pro project (only to export my audio to OMF from here) the audio doesn't match.
    Adobe media encoder doesn' support OMF unfortunately.
    Example; if I stretch the audio time in after effects, premiere doesn't.
    I am really stressing out and any help would be very welcome
    Thank you!
    Ellen

    Hello Jim
    Thanks for the reply!
    When I import my after effects composition into premiere, it is perfectly visible and the audio is correct.
    But now it is suddenly impossible to select > export > OMF
    Do you know why this is?
    Thanks!

  • Audio doesn't work when exporting to Quicktime

    Hi there.
    I've imported a FLV file with audio into a Flash file. When
    previewed as a swf, the audio works, but when exported to
    "Quicktime Video" (not the "Quicktime" setting) the audio doesn't
    play.
    I've double checked my Quicktime settings (ie the audio isn't
    Disabled, and i've tried Animation, Video, None and MPEG-4
    compression) but the audio still doesn't play.
    The weird thing is, if i have a Quicktime movie playing in
    Quicktime and then open my Quicktime Video file from Flash then the
    audio in the first Quicktime cuts out.
    Also in Quicktime the info on the Quicktime Video from flash
    says it has a Audio Track with the settings I exported it out as,
    but I'm still not getting any audio.
    Does anyone know what's going on?
    Thanks in advance

    Anyone?
    or is my question not making sense?
    Thanks in advance

  • Audio doesn't match video because repeated half way through

    Hi guys,
    I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
    In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
    Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
    Video:   ABCDEF
    Audio:   ABCABC
    I have tried opening it in a different project and somehow it happens exactly at the same point.
    I am totally clueless of what it comes from and getting really frustrated!
    Any idea?
    Cheers
    Babs

    Hello, I'm new to using forums like this.  Is it appropriate for me to post that I'm having the same issue?  Also sounds similar to Audio doesn't match video because repeated half way through as well.
    My situation is:
    Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
    Multiple Nikon D7000 video clips I've taken play back fine except for the following clip.  In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video.  I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
    I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to.  I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV.  I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
    Any help would be greatly appreciated.  I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again.  This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
    Thanks for any help you can provide.  I don't really know where else to go to figure this out.
    Joel
    My Premier Elements Project settings are:
    Editing Mode: DSLR
    Timebase: 23.976frames/sec
    Video:
    Framesize: 1920 x 1080
    Pixel Aspect Ratio: Square Pixels (1.0)
    Fields: No Fields (Progressive Scan)
    Display Format: 24fps Timecode
    Audio:
    Sampe Rate: 48000 Hz
    Output from MediaInfo
    General
    Complete name                            : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
    Format                                   : MPEG-4
    Format profile                           : QuickTime
    Codec ID                                 : qt 
    File size                                : 1.46 GiB
    Duration                                 : 10mn 32s
    Overall bit rate                         : 19.8 Mbps
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-15 03:24:05
    NCDT                                     : NCTG
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 2 frames
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 10mn 32s
    Bit rate                                 : 18.3 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 23.976 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.368
    Stream size                              : 1.35 GiB (92%)
    Language                                 : English
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-02 18:22:46
    Transfer characteristics                 : BT.470 System M
    Matrix coefficients                      : BT.601
    Audio
    ID                                       : 2
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, Sign                    : Signed
    Codec ID                                 : sowt
    Duration                                 : 10mn 32s
    Bit rate mode                            : Constant
    Bit rate                                 : 1 536 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 116 MiB (8%)
    Language                                 : English
    Encoded date                             : UTC 2014-07-02 18:22:46
    Tagged date                              : UTC 2014-07-02 18:22:46

  • Quality manager QMQU0003 The audio file is invalid and cannot be played

    Hi,
    I've client using Cisco QM 8.5. There is a recording dated 21st November, 2011 for one agent which he is not able to play back. The agent took many calls that day and all the recording are getting played back except one. The duration of call in question is shown as 37 minutes but the file size is 0KB.
    The error client gets while trying to play back is:
    QMQU0003 The audio file is invalid and cannot be played
    The recording is important to the client. Can someone pl comment what could be done to retrieve it and what could have caused it?
    I looked at Event Viewer on Agent PC, unfortunatley there aren't any entries since 8th November to 22nd November. The PC was rebooted on 22nd November and all event viewer is getting updated correctly now.
    I am attaching the screen-shot of error in case someone is interested in seeing.
    Thanks in advance,
    inner_silence

    Thought of updating the case with current status.
    Got some help from Calabrio and the engineer identified a known bug in QM 8.5.1 release.
    The Bug ID is: CSCTK75463
    Fix will be in QM 8.5.2.
    Checked CTIService debugs and found that the agent received a transferred call and the customer has Immediate upload turned on. As a result of this they unfortunately ran into the timing issue which is fixed in 8.5.2.

  • 4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

    4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

    Let me try again, Chenks. I'm a technical person by profession, and so can get deeper into things like this, but I have not attempted to use these methods of communication in the past. I'm trying to get some feedback to Apple on their worsening a product and really messing with existing customer configurations. I'll try to break things up below.
    1. Configuration:
    Existing Apple TV and Mac Mini configuration in place since December 2010.
    Three Apple TVs, one in Family Room for music and movies, one in Master Bedroom for music and movies, the third one in the Living Room for music only.
    I'm using iTunes as library. (Probably an obvious statement, but wanted to mention that.)
    2. Pre 4.2.1
    No problems at any location since configuration finalized and all equipment installed in December.
    Since December, Family Room entertainment equipment was updraded to a new Sony Bravia 3D, and a new Pioneer receiver. The Master Bedroom still has the original Toshiba 32HLC56 TV. That unit has only one HDMI input. I'm using the built-in speakers. This TV/Monitor is about fives years old.
    3. Problem
    I updated the software in two of the Apple TVs to 4.2.1. I updated the Family Room device and the Master Bedroom device. I had not updated the Living Room device.
    After updating to 4.2.1, the Family Room equipment works fine. That's the location with the newer TV and receiver.
    The Master Bedroom has different problems with different movies: e.g. "The Little Mermaid:" video, no audio. "The Lion King:" movie wont start at all.
    Additionally, in the Master Bedroom some movies work fine, other movies start but immediately go into pause mode. Pressing pause button on Apple remote will not initiate start of movie, screen does "flicker" for a moment but movie does not start to play, showing only the last frame that had been streamed.
    4. Not really a problem for me.
    Fortunately for me, I had not updated the Apple TV in the living room so I used it to troubleshoot the problem. Initially I thought it was a defective Apple TV in the Master Bedroom. I took the unit to the Apple Store in town and they exchanged it for me. I brought the replacement Apple TV home but I did not install it immediately.
    While testing the Master Bedroom set up once again to make it was working for our afternoon movie watching, I was again reminded that a software update was available. That message came up because it was the unit I had brought over from the Living Room. I proceeded to update the Apple TV to the new software version (4.2.1).
    As soon as I "updated" the software in the Apple TV to the new 4.2.1, the same problems manifested themselves. At that point I suspected that the problem was with 4.2.1, and not with the hardware.
    I called Apple Support and went through a series of troubleshooting techniques. We tested the Apple TV with the new 4.2.1 installed in it. This is the unit which originially in the Living Room. Under the direction of the Apple TV support technician, I used the Family Room gear and the Master Bedroom gear to try and isolate the problem to hardware or software.
    We eliminated the following as potential problems:
    a. TV speakers in the Master Bedroom
    b. HDMI cable
    c. Ethernet connection
    5: Conclusion:
    Fortunately for me, again, the Apple TV that the Apple Store had given me that morning still had 4.1.1. So I installed that unit in the Master Bedroom and everything started working normal again.
    6. Side note:
    An interesting observation: In early March I copied several movies from the Mac Mini to my iPad and some to my wife's iPad. All movies worked fine on our flight out and while we were away.
    My wife recently (about a week ago) updated the software in her iPad. and now some of the movies that played just fine on her iPad are exhibiting the same problems as the Master Bedroom TV when it is connected to an Apple TV with software 4.2.1.
    Apple has been trying to fix some problems in 4.2 when it released 4.2.1. I make that observation based on recent articles I found on the web. Most likely the Apple engineers were trying to fix things in one place and broke them in another.
    Clear as mud, isn't it?
    7. In closing:
    I'm good to go, I just need to remember not to update the software in the Master Bedroom Apple TV. I want to keep that unit at 4.1.1. It's possible that Apple might come to the realization that they hosed things for some of us. Because I do have three units in my home, I can experiement with the other two units should a "fix" come out. I can then update one of the two devices, connect it to the Master Bedroom TV, and see if the problem was corrected. If not, I stay with 4.1.1. But I'm not convinced that Apple will see this as their problem, it's always easier to point elsewhere.
    Regards,

  • When I compress my movie to quicktime, the audio doesn't sync properly, even though it looks fine in iMovie. How do I fix this?

    When I compress my movie to quicktime, the audio doesn't sync properly, even though it looks fine in iMovie. How do I fix this?

    Audio on the timeline, especially stream, tends to play very reliably. Is this project under any NDA or can you provide a FLA to examine? Let me know if you want to private message it and I'll shoot you a message.
    What version of Flash Player are you targeting and is this AS2 or AS3?

  • Realtek high definition audio doesn't work.

    On windows 8.1 pro BootCamp. Yellow caution sign appears at realtek high definition audio, doesn't recognise the speakers. I've installed again the driver s but nothing it doesn't work. This means i can't play any game such as gta 4. Please help. I've got an imac 21,5 2012

    maybe I didn't make it clear enough
    currently apple bootcamp does not have windows8.1 drivers as windows8.1 is not officially supported
    so one can try the windows8 bootcamp drivers http://support.apple.com/kb/dl1638
    or try drivers from realtek http://www.realtek.com.tw/search/default.aspx?keyword=drivers

  • Samsung Note 3 importing MP4 video audio doesn't sync

    I recorded a video clip in my Samsung Note 3 smartphone at 1920 x 1080. The video is MP4. When I import it into Premiere the audio doesn't sync. I've tried to convert the video into a wmv and mov using a conversion tool and the problem gets worse. The MP4 clip plays perfectly on my Windows 7 64bit PC. I'm using Adobe Premiere CC 7. Any ideas?

    MP4 is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    If your original video uses a Variable FRAME Rate it will not edit in Premiere Pro until you convert to a Constant Frame Rate

  • Audio doesn't drag to timeline with clip

    This is probably a really obvious answer to make me feel like a fool.
    I am using Final Cut Studio 7, working on a project from FCS6
    I am working on a project started by someone else. I've had no problems, apart from suddenly on one part, when I drag the video from the viewer to the sequence, the audio doesn't go with it.
    When I play the clip in the viewer the audio is there and also in the tabs, I can see the audio - so not sure what's happening here. Any help muchly appreciated.

    Are your audio channels in the time line turned on and able to accept audio?
    Do they look like this? (look at the small grab of the audio portion up at the top)
    http://grab.by/6nFT
    If so, then you need to click those to allow audio to put on the timeline.
    pJ

Maybe you are looking for