Audio doesn't work on my pavilion m6-1045dx

What can I do to fix it?

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56953.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
If you still have no audio, open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Start-up Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type', select Automatic and click Apply to save the change. Then click the Start button.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

I installed an HP update for audio driver, now audio doesn't work,

downloadde and installed an HP update for audio driver, don't think it installed successfully however now my audio doesn't work. is it possible to do a system restore on win 8.1?
HP Pavilion 500-214
This question was solved.
View Solution.

Actionhero, welcome to the forum.
Yes, it is possible to do a System Restore. Here is a guide that will help you with it.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on

my audio does not work on my pavilion dv4

This worked for me.
Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist. Move the .plist to your desktop.
Log out/in
If it works, delete the .plist on your desktop.
If the same, return the .plist to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

Video audio doesn't work

video audio doesn't work
video runs but no sound
please help

ITunes uses Quick Time to convert. Quick Time cannot convert MPEg (Muxed) Files. Read this:
Quick Time: Using MPEG 1 and MPEG 2 Files:
http://docs.info.apple.com/article.html?artnum=61608
Again:
It is not possible to export the audio portion of a muxed MPEG-1 or MPEG-2 audio/video stream using QuickTime.

USB Bose Audio Doesn't Work & DVD/CD Ejects during startup 10.6.1

Anyone having this problem on the Mac Pro 8 Core
USB Bose Audio Doesn't Work, have to pull USB plug out and put it back in for audio to be recognised & DVD/CD Ejects during startup >>> 10.6.1

What is the ouput of cat /proc/asound/cards, aplay -l?
For an example:
[firekage@arch_desktop ~]$ cat /proc/asound/cards
0 [XFi ]: SB-XFi - Creative X-Fi
Creative X-Fi 20K1 SB073x
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf6080000 irq 17
2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
[firekage@arch_desktop ~]$
[firekage@arch_desktop ~] aplay -l
card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
[firekage@arch_desktop ~]$
I think that you have multiple sound devices and their boot order changes after each reboot.
Last edited by firekage (2014-06-20 13:13:05)

Audio doesn't work after encoding

I have finished editing a video and gone to export it as a WMV and the audio doesn't work; there is just a buzzing noise.
The audio works fine on the timeline, but i just cannot export it.
Any ideas what's gone wrong?

Hi ATR, thanks for getting back to me. Here is all the info you required:
It's Premiere Elements 10 on a Windows 7 PC.
The source media is a mix of WMV, MP3 audio and JPGs.
The project settings are:
Editing Mode: DSLR
Timebase: 25.00 frames/second
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
The export settings are:
Windows Media:
Presets: HD 720p 25
File type: Windows media
Frame size: 1280 x 720
Fps: 25
Audio settings: 440 kbps, 96kHz, 2 channel 24 bit VBR (I have tried it with a number of different variations on this and still had no luck)
I’ve tried opening with Windows media player as well as VLC. Neither are having it.

5.0.2 Lollipop equalizer & clear audio+ doesn't work anymore (except in walkman)

In 5.0.2 Lollipop update equalizer & clear audio+ doesn't work anymore (except in walkman). In 4.4.4 equalizer works without problem! Sony please fix, because I can't listen other content without adjusted equalizer.
xperia tablet Z2 wifi

Solution by Rickard
"I have got some more information about this and it's up to the app if the equalizer is used or not. It's not on by default for all apps, the developer of an app must state that they want to use it in their code."
Android team turn this features off in default. Pffff why?? ))
And now we have to wait that all application developers have added this feature, Facepalm.

Html5 audio doesn't work for mp3s.

I can't seem to get tag <audio> working with mp3s on my system(FF 24, Win 7 x64). I tried some wav files, those work ok. But whenever i try to play mp3 file, the html5 player just flashes for a few milliseconds and then disappears. So, is there a bitrate limitation (or any other limitation) for html5 audio tag on mp3s?
Here's an example of code and one of the mp3 files I am trying to use - http://dindo.wz.cz/jukebox.html .
(file http://dindo.wz.cz/Galaxy32Star4.mp3 )
The console (ctrl+shift+k) gives these errors (rough translation):
[14:07:48.861] Type HTTP "Content-Type" "audio/mpeg" is not supported. Loading of media http://dindo.wz.cz/Galaxy32Star4.mp3 has failed. @ http://dindo.wz.cz/jukebox.html
[14:07:48.862] Couldn't load any of candidate sources. Loading of media was suspended. @ http://dindo.wz.cz/jukebox.html
p.s: Even the w3c example doesn't work when i remove the ogg source. (http://www.w3schools.com/html/tryit.asp?filename=tryhtml5_audio_all).

can you replicate the issue, when you create a new profile for testing purposes?: [[Use the Profile Manager to create and remove Firefox profiles]]

X-fi Xtreme Audio doesn't work in Windows 7 64 bit

Hello everyone,
I know this is a known issue and I've found many topics on this, but still I can't find any solution and I hope you can help.
I've a Creative X-fi Xtreme Audio that was working perfectly under Windows XP SP3 but then I've upgraded to Windows 7 64 bit and the sound coming out from my speakers is awful. I've installed the latest driver from creative home site, I've updated the OS via "microsoft Update", I've tried many suggestions I've found on the web to solve this, like phisically change the PCI slot of the sound card, or reduce the ram ammount via msconfig but it didn't work. I've tried some custom driver either, the support pack 2.7 by Daniel?K. but nothing... I'm still at the starting point.
What should I do?
This is my actual configuration:
OS: Microsoft Windows 7 Premium SP v 6..760
CPU: AMD Athlon 64x2 6000+
MB: Asus M3N78 SE (with the latest bios version 002)
Ram: 4gb
Video: nVidia GeForce GT 220

I use CS4 on a Windows 7 64-bit computer.
I noticed that none of the extensions I installed with the Extension Manager don't appear at all in any of the CS4 programs.
Can anyone tell me why this doesn't work or how to solve this problem?
Try posting to the Extension Manager forum:
http://forums.adobe.com/community/creativesuites/extensionmanager
HTH,
Randy

Edge audio doesn't work in DPS project

Being very happy after latest update of Edge CC, I've decided to make DPS project for iPad.
First, when I chose "autoplay" button for audio timeline, I got a warning about sound autoplay option is not supported at digital devices (??). So what should I do? To not use the autoplay?
Second, a preview of Edge animation in web-browser works perfect (both background sound and a sound for user interaction) - BUT when I put .oam file in DPS, the sound just DOESN'T WORK.
I tried everything - check-uncheck "autoplay", check-uncheck "preload audio", put an audio as a trigger.. no sound in iPad.
And when I put audio file directly into Indesign, a sound works perfect in iPad.
What's going on?

Agapyla wrote:
so the idea is all projects for iOS cannot use Edge Audio feature that was just released last month? At least in full way, as it is shown in built-in Edge Tutorial (autoplay)?
No, not exactly. iOS and other mobile devices can playback HTML 5 audio, which is what Animate outputs.
But the fact of the matter is that autoplay for audio (and preloading) is not supported by mobile devices - it's a limitation manufacturers build into their devices. Therefore, to use audio from Animate in mobile devices, you have to initiate audio playback from a user event, such as touchstart or click.
We warn you of this in Edge Animate when you turn on autoplay (warnings appear at the bottom of the Stage).

Audio doesn't work when exporting to Quicktime

Hi there.
I've imported a FLV file with audio into a Flash file. When
previewed as a swf, the audio works, but when exported to
"Quicktime Video" (not the "Quicktime" setting) the audio doesn't
play.
I've double checked my Quicktime settings (ie the audio isn't
Disabled, and i've tried Animation, Video, None and MPEG-4
compression) but the audio still doesn't play.
The weird thing is, if i have a Quicktime movie playing in
Quicktime and then open my Quicktime Video file from Flash then the
audio in the first Quicktime cuts out.
Also in Quicktime the info on the Quicktime Video from flash
says it has a Audio Track with the settings I exported it out as,
but I'm still not getting any audio.
Does anyone know what's going on?
Thanks in advance

Anyone?
or is my question not making sense?
Thanks in advance

Audio doesn't work after a BIOS update + strange beeps during bootup

Hi,
I just bought a MSI motherboard, 915P Neo 2 platinum.
1.
Everytime I boot up the system, I hear a set of beeps...it sounds like 1 long, 2 short beeps...so I followed the instructions and re-seated the memory and it still does beeping.
2.
MY MAJOR PROBLEM RIGHT NOW IS
I did a BIOS update using MSI LIVE UPDATE 3 and after that the sound doesn't work. I check for "unknown PCI devices" under WinXP but there are none. I re-installed the azalia driver again from the originial driver cdrom and still no luck.
I hope someone can tell me what is happening here and help me to fix it
thanks a lot in advance
regards,
Kittu

Hi,
Thanks for the quick reply.
I also did some updates along with BIOS.
I am listing them below.
I installed the following updates which the "Live update 3" reported as applicated to my system
MS-7028 v1.50
Intel INF Update v6.2.1.1001
VIA SATA&IDE RAID Drivers v5.1.2600.410
After this, I noticed the sound was not working so I re-installed the azalia bus driver and still the sound didn't work. So, I checked the bios and changed the value of the audio-mode from AC97 to Azalia. Then, again re-installed the azalia driver but the sound still doesn't work.
How do I re-install the CMedia audio driver ?
How do I clear the CMOS ?
thanks,
Kittu

Realtek high definition audio doesn't work.

On windows 8.1 pro BootCamp. Yellow caution sign appears at realtek high definition audio, doesn't recognise the speakers. I've installed again the driver s but nothing it doesn't work. This means i can't play any game such as gta 4. Please help. I've got an imac 21,5 2012

maybe I didn't make it clear enough
currently apple bootcamp does not have windows8.1 drivers as windows8.1 is not officially supported
so one can try the windows8 bootcamp drivers http://support.apple.com/kb/dl1638
or try drivers from realtek http://www.realtek.com.tw/search/default.aspx?keyword=drivers

Help my audio doesn't work on my MacBook Pro

Ok so this is whatt happend: I was just on my Mac with my headphones, than decided to stop, so I pulled my headphones out. The next day I want to watch some videos but my audio didn't work, I went system prefrence and to "sound" to "input" and my mute was off, the sound was up, and the "Internal-Speakers" was slected.

1. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

Audio doesn't work, wierd error messages

Sorry for posting a seperate message, but I thought my problem might be different and a more general one. Since a few days, iChat audio is not working. I have a feeling this is since the last security update. Are you experiencing problems? So far I have got 3 error messages. I have tried chatting with my wife,
and it gives me these messages after failing to connect audio chat:
1. (My wife) did not respond (although she was responding)
2. Bandwidth is not sufficient
3. This is the wierdest one: (I) am not responding!!! I am requesting an audio chat and it says I am not responding? crazy!
I have tried connecting from my PB g4, both from wireless and LAN and also from iMac G4, to my wifes iBook, both on LAN and wireless.
ANy suggestions?

Hi Alpesh,
If your System Preferenecs > Quicktime is set to Automatic change it to match your Download.
The same applies it seems to the Top setting on Intranet/LAN
Ralph

Audio doesn't work on my pavilion m6-1045dx

Similar Messages

Maybe you are looking for