Audio Drift with Pro X but not iMovie

For years, I have been editing in iMovie11. I take a 30 minute video and then sync it with audio that was recorded using Pro Tools. In iMovie, I could take the video from my HD camera shot in 30p or 24p and the audio from ProTools(after editing it down) and it would be synced great from begining to end.
Now that I have switched to FCPX, I am noticing a sync problem. At the beginning, it is synced fine,but the farther I go the worst it gets. (The settings in my audio and video have not changed from iMovie and FCPX) WHY?
What should my settings be for the audio? 44 hz or 48 hz? Mono or stereo? wav or mp3?
Do I need to stick with iMovie11? Please tell me no!

I am capturing the video with a Panasonic HD cam AG-HMC40. Filming in 720p with either 30 or 24 fps. I load it on FCPX then also load the audio wav file and then manually sync it up. It is great for the first 10ish minutes then progressively worse.
I am not using the sync clip function. Not sure how-guess I should learn about it.

Similar Messages

  • My firewire port works with ext hd but not with audio interface

    2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

    You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
    This is not, neccessarily, an Apple issue.

  • Error #1503 with AIR3.4 but not AIR3.2

    I'm working on an Android/iOS app using Adobe AIR. The app appears to work normally both inside Flash Pro and real devices except for the following test:
    Do Publish Preview inside Flash Pro.
    Close the preview window.
    The error appears in the Output panel:
    Error: Error #1503: A script failed to exit after 30 seconds and was terminated.
         at [*code location is a for loop inside writeExternal() of a class saved to a Shared Object*]
    Test Movie terminated.
    This happens with AIR3.4, but not AIR3.2. It doesn't matter how soon I close the preview window. I did a lot of code checking, tracing, etc. but still can't figure out what's wrong. Any suggestions?

    Most obvious suggestion is an infinite loop due to a null variable. Check the condition for the loop to continue and that will give you an idea what is causing it.
    Though, why that would be an issue between SDKs is beyond me without seeing the code. (And possibly even then...)
    G

  • .pdf works in Acrobat Pro 8 but not Adobe Reader 8

    I have a dynamic .pdf that I created in Livecycle Designer.
    It works perfectly in Acrobat Pro 8 but not Adobe Reader 8.
    There is a function that highlights a form field orange. It is called from the enter event of every form field.
    There is another function that highlights a form field red if the field contains an invalid value. This is called from the exit event of every form field.
    When I enter a field in Reader 8, it highlights orange as it should but does not allow me to enter a value and it adds an additional blank page to the .pdf. Also, it does not highlight red as it should on exit.
    If I remove the enter script, the exit script works fine.
    I sent the .pdf to somebody to test and it worked perfectly for him in Reader 8.00 but not for me in 8.00 or 8.01 which makes me think maybe it is just a problem with my settings.
    Can anybody help?
    Thank you.

    Okay, I just upgraded to Acrobat Pro 8.1 and the .pdf fails there now too.
    So my problem is not an inconsistency between Acrobat and Reader, it is that the .pdf works in the earlier 8.0 but not the latest 8.1.
    I am happy to send the .pdf to anybody who wants to see it. Hopefully the problem is with my code and not the update.
    Thanks.

  • Isight works with photo booth but not in ichat or google talk or skype?

    isight works with photo booth but not in ichat or google talk or skype?

    Hi
    Is this an Internal or External iSight ?
    In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
    If it reads Audio open the Connection Doctor from that same menu.
    In the connection Doctor open the Capabilities tab
    Does it say your Internet Connection is too slow ?
    At this point I would need to know which iChat Version.
    However also look in the View Menu.
    Is Show VIdeo Status ticked ?  (this shows green Icons next to your Buddy Pic and those of your Buddies
    Next go to the iChat Menu > Preferences > Video Section
    Do you see a preview here ?
    Re: GoogleTalk
    Have you enabled TALK on your Google Account Settings ?
    You need to have a Google Mail ID (Not any other sort of Google ID)
    Have you downloaded the Intel only Web Browser Plug-in to do Video in a  Web Browser.
    10:48 PM      Tuesday; August 30, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HP Pavilion 15-p027ne, Audio working through headphones/earphones but not through speakers

    HP Pavilion 15-p027ne:
    Audio working through headphones/earphones but not through speakers.
    I downgraded from windows 8.1 to Windows 7 (64-bit) and the problem is still not resolved. 
    Appreciate any troubleshooting tips.
    Thanks.
    - HP Pavilion User.

    Hi there @donimuha 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are getting sound from the headphones/earplugs but not from the system speakers. I am happy to assist you with this.
    As the sound is working through the audio jack, I will assume for now that the audio driver is fine. Please check through the following page, which is very comprehensive. If you are still having a problem it is possibly a hardware issue with the speakers.
    No Sound from the Speakers (Windows 7)
    Let me know if that works for you.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

    in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

    Hi,
    Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
    In iCal open the File menu and select New Reminder List... and select where to put it.
    Best wishes
    John M

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • My iPhone4 docks correctly with some devices but not others, please help!

    Hi,
    Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
    I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
    *Phone used to dock fine with anything and everything - this was about 1 year ago.
    *for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
    *symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
    *I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
    *I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
    *2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
    * now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
    *just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
    to my knowledge it is NOT;
    - a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
    - a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
    -a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
    could it be a problem with the data exchange between phone and device when it is docked??
    or do I really need to try changing the port for an 'official' one??
    or is it just broken and that's that?!

    It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

  • When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

    when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on.  When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back.  I never noticed this with os leopard, Just after i installed os snow leopard.  All software is up to date only I think, thanks to apple they droped support for logic express.  Thanks for any suggestions.

    Does toggling CC off & back on bring it back?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
    http://support.apple.com/kb/PH1453

  • How do I share my iTunes library with my mother, but not on our home network?

    How do I share my Itunes library with my mother, but not on our home network?

    Another alternative is she can select tracks from your library copy and just add them to her library. Then she does not have to bother with switching between two libraries.

  • How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

    Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

  • Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

    I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter).  Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it  Thanks, - Matt Symes

    OK - I appear to have resolved the issue.  I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.    

  • I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

    I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for