Audio driver HP Pavilion dv6 is not working, help!!

Hi HP Support Forums.
I'm writting from Perú.
I have a  hp dv6-6b03es laptop with beats audio and the original software was Windows 7  Home Ultimate 64 bits.  However, I just formatted my laptop with Windows 7 Professional 32 bits. Now i have audio problems, Every time I turn my laptop audio is not heard and I have to reinstall the audio again. Every day! and some time never works 
In the webiste support i can't find my operating system(Windows 7 - 32 bits)
Please help me

Hi,
Try the following.
Download the following IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done,

Similar Messages

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have pavilion dv6 sound not working hp provide new update idt stil not working

    HI .
    i have pavilion dv6 sound  not working hp provide new update idt stil not working

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

    why is my  built in webcam and mic on my hp pavilion dv6-6113cl not working?

    Enter the device manager and verify that the webcam is present and has a driver installed.
    1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Pavilion dv6 mousepad not working

    My laptop operates on windows 7, 64 bit.
    The mousepad has stopped working and there are no lights displaying on the pad.
    I tried installing the driver from HP & it says that Ihave a later driver installed.
    I am unable to find that driver. I use a USB mouse but have always done so without a problem until now.
    Any ideas?
    Thanks in advance

    Hi curlyclan,
    Welcome to the HP Forums!
    Thank you for your post, I will do my best to help.
    I hope you enjoy your experience, to help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I grasp that the Touchpad has stopped responding and it is not lit.   Here is a link to  Using and Configuring the TouchPad (Windows 7 and Vista) that may help.  Was it perhaps, accidently disabled?
    You can run diagnostics to test the Touchpad for failure. On startup press F2 approximately once every second to display the diagnostic screen.  About UEFI and the Startup Menu.
    You can also run MS Fix It to help resolve issues. The HP Support Assistant can also help to fix issues and look for updates.
    If you would like further assistance, would you please provide the  exact model of pavilion dv6 you have?  How Do I Find My Model Number or Product Number?
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Pavilion dv6 Webcam not working?

    I have a Pavilion dv6-1030ca notebook, and for the past few weeks, I've been having trouble with my webcam. When I open HP MediaSmart Webcam, I get the following error message: "No video device detected. Please plug a video device into your computer. If you are using an integrated camera please make sure it is turned on." I have an integrated camera, and it (usually) turns on when the webcam application opens. I am running Windows Vista with SP1, and have tried many things to fix it, to no avail. The webcam does not appear in Device Manager, under Imaging Devices nor any of the USB Root Hubs. So far, I have attempted to:
    - Reinstalled the USB Root Hub Drivers
    - Tried to fix the solution in BIOS (as another thread suggested)
    - Attempted to use Recovery Manager to reinstall the driver (was not in the list)
    - Created Recovery Disks to solve the problem (it didn't)
    - Upgraded the MediaSmart Webcam software
    I am in school right now, and I really can't afford to give my laptop away to get repaired for three weeks since I have exams coming up. Any help would be appreciated! Thanks!
    Message Edited by annabelle89 on 07-27-2009 08:30 PM
    Message Edited by annabelle89 on 07-27-2009 08:31 PM
    This question was solved.
    View Solution.

    I am in the exact boat as you.
    Couldn't understand why all of a sudden, after about 3 months, the webcam 'device not found' in Win7 Device Manager, Google Chat, Skype, etc.
    Called HP support, and they made us do a hard reset of the entire notebook, removing the battery, ac cord, and holding down the power button for 1 minute.
    Webcam came back for 1 day, but I'm not about to unplug and reset everytime I am in the middle of a skype call?!
    Sadly, HP or Costco (where it was purchased) doesn't seem to care or are willing to provide a solution.
    Instead of recalling the computers, like automobile and other industries, they just wait and hope that the warranty runs out before it becomes a big deal.
    They didn't stop selling them either, even with this known problem.
    So now they have the G series of notebooks, and so the dv6 and its headaches can fade away for HP.
    I have probably been involved with over 100 HP product purchases in my job the past 5 years, but this will be the last for the forseeable future.

  • HP pavilion dv6 fan not working

    My HP PAVILIONDV6T-6100 laptop (Product no. LM720AV) is having problems with the cooling fan and overheating. I have started getting the cooling fan not functioning error at startup. When I use the laptop-the cooling fan runs almost all the time. It turns-off when I have only one application running on the laptop.
    I understand that since the fan is running perfectly fine, the fan motor is still functional. Could it be dust accumulation that is causing the error and fan running continuously? Where can I get the insturctions for opening the cooling fan assembly and cleaning it? Also will I need to replace the thermal insulation after cleaning?
    Thanks
    Sunny

    I paid $30,000 for my car but I trust the dealer to work on it because I know their mechanics do it every day. I could watch youtube videos and figure out how to do a tuneup but they will do it better. I will change my own air filter however since it is not too hard and will save money. Replacing a cooling fan is more like a tuneup than replacing an air filter. Still, you can do it if you follow the Manual and are careful. Here is the Manual:
    Manual
    This is the part number for your fan and heatsink:
    641477-001
    $63 from HP:
    http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=11C544B95DEB4BC6A0D99C14917258C7&Searc...
    $20 on eBay:
    http://www.ebay.com/itm/New-OEM-HP-Pavilion-DV6-6000-DV7-6000-CPU-Fan-650797-001-641477-001-665309-0...
    I would go ahead and run all the diagnostic tests you can access by tapping F2 and entering UEFI Diagnostics. Other than the fan what other problems are you having?
    If this is "the Answer" please click "Accept as Solution" to help others find it.  

  • PAvilion dv6, fan not working correctly?

    Was on my laptop, it shut down randomly, notification popped up saying fan was not working correctly. Is there a way to fix this? Or will it have to be sent away?

    Try a can of compressed air in the reverse direction of the normal air flow. You may just have a massive amount of dust on the inside of the heatsink near the fan blades.
    Here is a youtube video and about 15min in you can see the fan clearly:
    http://www.youtube.com/watch?v=5VMqrudLhJA&feature=player_detailpage#t=1s
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • HP PAVILION DV6 6154FAN NOT WORKING CORRECTLY

    MY LAPTOP FAN IS NOT WORKING CORRECTLY A STARTUP MESSAGE COMES FAN NOT WORKING CORRECTLY GO TO SUPPORT FORUM.
    MY PRODUCT WARRANTY IS OVER.
    PLEASE ADVICE ME WHAT TO DO.
    SEEKING FOR KIND SOLUTION.

    Try cleaning up the cooling module. Blow compressed air into the fan grill. Test the laptop after the fan and heatsink is clean.
    If cleaning the cooling module doesn't help, you'll have to replace the fan. This requires complete laptop disassembly.
    In order to replace the fan you'll have to remove the motherboard.
    Here's the official service manual which could be useful.
    By the way, there are two different types or cooling modules. One for AMD processors and another one for Intel processors (page 93 in the service manual).
    If you decide to replace the fan, it's not necessary to replace the entire cooling module assembly (heatsink and fan). It's possible to replace just the fan which can be purchased on eBay.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • No Audio Issue HP Pavilion dv6...Please Help!

    Good day, I have been experiencing several audio issues with my laptop. Firstly, my laptop stopped playing audio unless I disable then enabling the IDT HD audio CODEC. I then tried uninstalling the driver and reinstalling it only to find that the drivers i found weren't compatible. Then I tried the recovery manager and when I restart the notebook it encountered a problem and I lost audio and my Beats enhancement. Can someone please help me on what to do?
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    IDT HD Audio Driver - Windows 7.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, download and reinstall the Chipset driver on the following link.
    Chipset Driver - Windows 7.
    When the Chipset reinstallation has completed, shutdown the notebook, unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion dv9880ee speaker not working

    One of my two built-in laptop speakers has stopped working. I've already updated my Audio driver, but it seems like it has nothing to do with my audio channels because it works fine with my headphones.
    Notebook model: HP Pavilion dv9880ee
    OS: Windows Vista Home Premium 32-bit Edition
    Thanks in advance.

    dhavalpalsana wrote:
    my left speaker on hp pavilion dv6 has stopped working and i still have warranty left can you help?
    Hi,
    Please contact HP directly using the following list:
      http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
    Good luck,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Not able to view mails in inbox

    Hi I use ovi mail and currently i am not able to view mails in any of the folders. I use the same user name as that of my yahoo mail account. Does this has to do anything.

  • Uploading File for ESS

    Dear All I have to upload few file to be accessed from my portal as I made configuration on R/3 using SPRO. In SPRO I have to mention a url for the document to be accessed. Will you suggest me the locations for storing documents or suggest me to stor

  • "no muxer in java.library.path"

    when I start the default server of the weblogic6.0 with sp1,have the error message, <Notice> <WebLogicServer> <WebLogic Server started> <Notice> <WebLogicServer> <SSLListenThread listening on port 7002> <Notice> <WebLogicServer> <ListenThread listeni

  • BP Creation Error

    Hi Experts, In our system, when we go to transaction BP and save without entering any data, we get an error popup saying 'BP 100023556 already exists'. The number is an example number and keeps on changing with every new SAVE. Why is this error comin

  • Depreciation of inventory in material master

    Hi I have a customer who would like to depreciate the inventories kept in the material master with 2% per month, the only criteria for the material is that it has been used. Please advice BR Elisabeth