Audio Drop Off

In final cut pro I have a project that is 1 hour 47 minutes and 28 seconds. I finished editing it and so I went to file -> Sent to -> compressor. In compressor I selected to encode the file to an MPEG 2 5.0Mbps 1 pass and Dolby Digital Professional (Auto) for the audio so I could then make a DVD of this project in DVD Studio Pro. After the compression was complete, the audio and video files are the same length (within a couple of seconds of each other) but when I bring it in to DVD studio pro, the last 10 minutes or so of the audio are silent. All of a sudden it is just silent. I checked in compressor and when I play the preview before rendering in compressor and final cut, the audio is there, but after compression the audio is gone.
I have tried re-compressing the audio files again in DD5.1 and 2.0 and neither has worked.
Any help is appreciated.
BTW, all apps are from FCS3.

Curly57, I can understand that this must be a difficult situation and I thank you for sharing what you've done to troubleshoot it. Does this audio drop-off only happen while in your house? Do you notice these issues elsewhere? How does the signal on the phone look at that time? Has our tech support team ever advised you we were submitting a resolution ticket?
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Intermittent Audio Drop-offs with Airtunes to Apple TV

A number of other threads have similar problems. iMac 2.8 GHz iTunes 8.1 is connect to an updated ATV via new dual-channel ABS on the "n" band. Still there are audio drop offs with AirTunes as it did with the previous ABS Extreme n and previous version of iTunes. So much so, I just gave up and used the Apple Remote on the iPhone to play ATV. Any suggestions would be appreciated.

Switching from WEP to WPA/WPA2 personal seems to have totally cured the dropouts for me.
Also I used an old flying saucer Airport as the receiver via ethernet out for my entreatment center instead of using the AppleTV's wireless.
Also I had a Panasonic security cam that didn't support WPA so I used another flying saucer Airport via ethernet out as its receiver.
So now my setup is,
Airport Extreme in my home office as my main base station with a Motorola ADSL 2200 router feeding it internet.
Flying saucer Airport via ethernet and a hub feeding my AppleTV, DirecTV DVR, and a Mac mini.
Another flying saucer Airport via ethernet feeding my Panasonic security cam.
Airport Express for my bedroom speakers.
All airports are in bridge mode with the Motorola 2200 DSL modem acting as my router. (this seems to be the only way my Vonage adapter recovers without having to be reset if my DSL goes down)
I steam music from my 17" Macbook Pro to the AppleTV and Bedroom speakers all day now without any dropouts.

IChat audio drops off

I've looked about, but can't seem to find anyone with a similar issue, my iChat audio drops off.
I spend long hours on video iChat and for no apparent reason, after a while, my fiancée will think I'm being quiet.
I can open the Audio/Video preferences and the sound meter bar will be unresponsive to all sounds.
I go into the computer sound settings and the input bar will be active, jumping up and down the meter with any sounds made.
The only way I seem to be able to regain the sound it to quit iChat and open it again and then recall my fiancée.
Does anyone know a cure that will stop this happening, it's been going on since updating to 10.7.3

Hi,
As there are no actual volume settings in iChat itself there is obviously some sort of Capping mechanism or some process that does not fire properly.
On the whole I tend to keep my computer volume Low and use this AppleScript to increase the Volume (output)
Some while ago I added the Input volume line:-
using terms from application "Messages"
on av chat started
        set status to away
        set status message to "In Conference . . ."
        delay 0.2
        set volume input volume 85
        delay 0.2
        set volume output volume 50
        delay 0.2
    end av chat started
end using terms from
this needs to be stored in your Home Library/Scripts/iChat (or Messages folder) and linked to in iChat > Preferences > Alerts by changing the top item to Video Chat Started and enabling the Applescript option and linking to the Script.
7:21 PM      Saturday; March 31, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Recorded Audio drops off to intermittent nose

This is a desperate plea for help. I have a meeting with one
of our engineers in two hours. My plan was to bring up the
application and record his audio as he steps through the process.
When I tried it this morning I get about a minute into the
recording before the audio drops off into unintelligible noise,
sometimes coming back to a word or two of clear audio and then
dropping away again.
Has anyone encountered this and, if so, what did you do about
it?
Thanks

Hi Frank
I have nothing to offer with regards to Captivate other than
to suggest that it may behoove you to use Sound Forge to record the
audio portion (since it appears to have no trouble there) and later
import the audio Sound Forge created back into Captivate if your
goal is to create a Captivate project using said sound.
Cheers... Rick

Airport network speed - quick answer (and a note about audio drop offs)

I saw this question come up a lot when i was reading how to stop the airport express from dropping the audio signal... **How much bandwidth is all this using?**
Quick answer is about a half a Megabit per second on my network. yipes.
to check for yourself (...if you're using XP...), press control-alt-delete to open the Task Manager, then go to the Networking tab. You'll be able to see your usage there. Multiply the percent of Network Utilization by the Link Speed (for me, about 9% times by 11Mbps = 1Mbit used per second, but I stream 2 connections at all times, so that's where we get 1/2 Mb)...keep in mind that your network utilization is really determined by your router's make and configuration, as well as (and this is the real factor) the amount of collisions and interference in your network.
*and a note about a healthy airport signal and audio drop offs*
... looking at the Networking tab, you shouldn't see an eratic graph (it shouldnt jump back and forth from 0% to 100% and back). a few high spikes every few seconds is ok, even rising to 100% is expected, but if your average network usage is too high (say 20%), there's too much interference. secure your network (WEP enable) and/or filter the MAC addresses. AND play around with the wireless channel used for boradcasting. really.. try it... try all the channels... i got really discouraged reading all the voodoo answers on other posts. (personally, i stayed on channel 6,... i rebooted my whole network of computers and routers at once and that got rid of the congestion for me... for now)
...and if all else fails, call 800 275 2273 for tech support.
IBM ThinkPad Windows XP Pro

Selamat Phil Smith,
Actually do we know each other, cause i know a phil smith.
Actually an ether net cable is OK for the short term. But if i get another computer it may get complex. Spent a lot removing cables too.... Looks like i will have to buy the special modem router... Painful $600.
This share internet thing over airport looks like a great idea till you realise it disables access to the ariport network for the computer doing the sharing.
Cheers and thanks for the idea
joe

Preview in iDVD fine, audio drops off in data image or burned DVDs

Playback in Final Cut HD Express and iDVD preview works perfectly. I create a DVD image and the audio drops out the last minute of a 39 min program. The movie file source in iDVD is DV/DVC Pro. I did a Quicktime conversion from Final Cut using High Quality H.264 and the audio remained but the quality was awful. I did a program info in iDVD and the DV movie did not eat up too much space in iDVD so that's not an issue. I have 28 avail. GB in my external drive where the project is located so not an issue.
I have 23 GB left in my internal drive so that wouldn't be an issue either.
The Apple Store techs were stumped.
The audio that goes missing in the data image and a DVD I burned was a fade out done on Final Cut. There is a blue line on the timeline, but if that was an issue then it wouldn't play back in iDVD. It DOES play back perfectly in iDVD. Somewhere in the conversion from iDVD and a data image or DVD messes with that audio. Any hints?

No definite suggestions, except for things to try (might they count as hints?):
Before exporting from FCE, did you mix down the audio? (Sequence>Render Only>Mixdown).
Did you export a reference movie, or a self-contained movie? Whatever you did, you might try the other.
What versions of FCE, QuickTime, iDVD? Some recent QT updates have caused strange things to happen in older versions of FCE.

Audio drops off when playing movies after 20 minutes or so

Sound cuts out and video keeps playing and will not work until itunes is closed and reopened

That would be nice, but the reality is that even if software companies issue frequent updates and patches they still aren't like to fix every bug that an application has before the next release. And once that next release arrives, they'll be even LESS inclined to fix it.
If Adobe issues a patch to fix this audio cut off issue in Cp5, great. But if I had deadlines screaming down on me that I couldn't meet without a fix, I'd grizzle about it, yes. But I'd bite the bullet and update.

Audio suddenly drop off when Airplaying video into Apple TV

I´m trying to stream the content from my MacBook Air into my TV via my Apple TV using Airplay. Both audio and video work fine the first seconds on the TV then, suddenly, the sound drops off.
All the sw is updated, the problem began after the latest Apple TV update.
Does anybody have any ideas on how to solve this ?? (The solutions exposed in other threads doesn´t solve my problem)
Thank you in advance

+I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
+If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
A used Mini will usually lack the Apple warranty.
Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software.

TURNING OFF ANTIVIR SEEMS TO SOLVE AUDIO DROP OUTS!!!

To all XP Pro users: try to turn off your AntiVir or a similar 3rd party service and figure out if your audio drop outs are gone.
In my case it is. VICTORY!!!
president

Victory too early. Still some drop outs but very rare. Probably I have another 3rd party service which affects AirPort Express? Don't know, I'll give up and live with this piece of sh*t.
president at agressive screaming wild level

Audio dropping out during playback in timeline

Hey everyone,
I've dug through these forums and unless I just completely overlooked it I have not found a solution to this issue. I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
Any ideas on what is happening would be greatly appreciated. This is incredibly frustrating have to export out a video just to be able to watch it through.

Having this annoying problem also. Using the Space Bar to play timeline it takes pressing and holding to a count of three or trying press play three time in a row using the space bar to get ungarbled audio, or any audio at all in a normal uncomplicated sequence on the timeline.
Really annoying. Audio used to be so simple and untaxing to a sequence.
Adobe Premiere Pro CC 2014.1 release
8.1.0(81) Build
OSX 10.8.4
40 GB RAM
G Raid G Speed Q w/ ESATA connection
1920x1080 29.97 Progressive Scan Sequence
48Khz
Apple PRoRes 422
12 channels of audio/ only 2 of 12 monitored.
1/2 resolution on Program monitor
ADOBE.....WISH THERE WAS A SOLUTION?

Sound drops off when using hdmi outport to connect computer to an AV reciever

Satellite M640,I5 2410 processor, windows 7HP. After about three minutes the sound drops off when connected to the av reciever through the hdmi outport. If I touch the trackpad the computer reconnects for another three minutes and then disconnects. If I touch the the trackpad about every two minutes the computer stays connected indefinetly. This problem does not occur if I use the computer to play an audio CD. Any fix suggestions.

Hi peter,
try to repair your permission by open application folder > utilities > disk utility > repair permission.
It should fixed the unexpectedly quit for several applications.
And try to get latest info from Griffin sites, maybe this one will help too:
http://www.griffintechnology.com/support/article.php?artnum=314
ps: why not try macbook built in microphone?
Good Luck.

Audio drops out when following video to external monitor

When I play a sequence to an external monitor, the audio drops out for 2 to 3 seconds after changes on the video track, and then pops back in with no interuption in video output. It doesn't happen at every cut, but it's consistent in the places it does. I thought it might be caused by the size the project has become. So I exported the sequence as a quicktime file, closed the lage project, opened a new one and exported the new file and played it and it happened again, even though there were no edits. It doesn't occur at all when I turn off external video, and play it on the computer. I connected a new firewire from the computer to my DV deck, restarted the computer, but it keeps happening.
Is it that the dramatic change in color, light and compostion crowding out the audios ability to follow the video through the wire?
I'm completely stumped. The next step will be to open the computer and try to blow any excess dust out. I do this periodically anyway, and my last time was two months ago, so I'd be surprised if it works.
Maybe the G4 with 2G processing power can no longer handle the program, but it shows no sign of stuggle in any other way.
My clients are starting to grow restless.

Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
Thanks again,
jesterhead

Audio Drop out @ every 2 seconds

Having issue with the Audio dropping out every @ 2 seconds, indepentant of source (local, sync'd computer and web trailers). Have done factory reset, still doing the same thing. AppleTV is connected to the TV through HDMI connection.

Try turning your tv (not tv) off and on.

Audio drop out while playing DVD

I import a quick time file from Final Cut Pro into DVD Studio Pro. I burn my DVD and it plays just fine in my MacPro. However, when I play it in my home DVD player (and other people's home DVD player), the audio drops real low when there are not two channels of audio playing.
For example . . . At the start of the piece when just music is playing, the audio levels are real low. But when the voice track comes in, all audio channels come up to their normal level.
I would love any assistance with this problem. Thanks!

I too have been experiencing this problem recently. It does sound like my hard drive is falling a sleep and then has to start up again every few minutes. I'm running the latest version of iTunes and have a 300GB internal hardrive in my G4 Tower running the latest 10.4 OS. I though it was an energy saver issue and turned off "put hard disk to sleep" as well as turned off the screen save and everything else. Not ideal but am in the process of testing it to see if it's related.
Strange this would happen.
Mitch

IOS 5.1 audio drop outs - bring back my music!

I was in the car listening to iTunes via Bluetooth and later via an iPhone dock connector to stereo cable. On both occasions iTunes also dropped all audio the first time another app made any noise. For example, I'm listening to music and then my GPS app tells me the next turn, as soon as she finishes talking the music audio drops out. The next time she tells me to turn I hear my music playing in the background, but it drops as soon as she stops speaking again. If I turn off Bluetooth, then force a connection back to my stereo the music works until another sound happens, even the beep of a new email will cause the audio to be lost.
As I sit here and type this I could hear the clatter of the keys, until a moment ago when I received an email (and got the email sound), now the keyboard is silent.
I just got another email (c'mon people, it's 6am on a Saturday!) and the keyboard sounds are now back.
My wake up alarm just sounded and my keyboard audio is gone again.
Didn't notice this until the iOS 5.1 update. It definitely did not occur previously, as I used my iPhone for music driving cross country the week prior to the update.
Thanks,
Sean

Where's the backup of your laptop from before it crashed?
http://support.apple.com/kb/HT2519

Audio Drop Off

Similar Messages

Maybe you are looking for