Audio dropped out when burned on DVD - PRE.

I have finished my movie on PRE 8 and burned it on a DVD in high quality. The problem is the background music works, but the audio from the videos is dropped out. When I play it on PRE 8, the audio works perfectly. The video and audio comes from a JVC Everio HDD. Everything works fine until I burn it.
I did not use Instant Movie or Audio Mixer because I did it manually.
Is there anything I need to do before I burn the DVD, or do I need special settings?
Another problem I have is that Organizer turns off and does not work.

Patrick,
You gave me an idea for two tests. They are simple and fairly quick and will not require any real editing in PrE, or another NLE.
Test 1:
From Export/Share, Export your movie. I think you are doing SD/DVD work, so choose DV-AVI. Export just the Video (checkbox for Video and Audio, and you want Video only). This will give you a silent Video-only file. Now, Export>Audio (choose PCM/WAV 48KHz 16-bit) to get an Audio-only file. Test this Audio-only file. Did you get both the AV's Audio and your Soundtrack? You should. Then, create a new Project to the right specs., and Import those two files. Note, your exact placement of the Audio-only file might not be on Audio Track 1, and just let it go to Audio Track 2. I'd not use Narration, or Soundtrack. Test. Burn to a DVD RW disc, so you do not create a coaster, and test again.
Test 2:
Do a Save_As, name and locate it. Delete your music from the Soundtrack. Export/Share the movie with both Audio & Video. Test. If things are working now, without the Soundtrack, I'd bring in your music, but try placing it on Audio Track 2. Test. Note: an alternative to this would be to do two Save_As Projects. In one, remove the AV's Audio completely, and then Share/Export just your Soundtrack as an Audio-only file. Choose the same PCM/WAV 48KHz 16-bit. Then Import that into the first Save_As, the one with no music. Again, try placing this file on Audio Track 2. Test.
I worry that maybe one, or both of the fixed Audio Tracks, Narration, and/or Soundtrack, is getting in the way. The above tests will be quick and should get you the results that you need, with what you have. The tests will also tell us if something is wrong with the Soundtrack Track, as it seems to be killing the AV's Audio on Audio Track 1.
Good luck, and please report,
Hunt

Similar Messages

  • Audio drops out when burning DVD

    Hello -
    I have imported itunes to play behind the video clips - it plays well on screen and through Quicktime Player, but after burning to DVD either through toast or iDVD the camera audio is there but not the itunes. Any suggestions??

    Hi CC:
    Welcome to discussions!
    Were the songs purchased from iTunes Store? If so, they are most likely protected and you will need to burn them to an Audio CD and import from that.
    Sue

  • Why does audio drop out when scrubbing iMovie events?

    Why. does audio drop out when scrubbing iMovie events?

    If the audio returns if you slow down scrubbing you are probably just scrubbing too quickly.

  • Audio drops out of burned movie

    Hey all.. I've burned a DVD twice now, and the audio is dropping out silent at the same point 3 minutes before the end of a 90 minute movie... the QT movie (H264) is fine, but when encoded in iDVD, i get the audio dropping out completely.
    Anyone see this before?

    I've seen audio drop/s before on an iDVD that exceeds 99 images.....yes.
    (but not normally at the very tail end of the DVD). I've also seen audio drop and/or out of sync audio when not using the recommended 16 bit audio. Sometimes people forget that iMovie & iDVD works best with 16 bit and NOT so well with 12 bit audio.
    Let me know if any of these are useful:
    http://docs.info.apple.com/article.html?artnum=302925
    http://docs.info.apple.com/article.html?artnum=303550
    http://docs.info.apple.com/article.html?artnum=61636
    http://docs.info.apple.com/article.html?artnum=303375
    http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html

  • Audio drop out after burning to iDVD

    I am running FCE 2 and checked all of my audio (mixed it down and everything). Plays well when I run FCE. When I burn the clips to iDVD, I notice that the audio drops out in certain scenes, and it's the same scenes. Ruined 5 dvds so far after trying to a few things.
    I am using all internal HDs (Extended Journaled). Any suggested would be appreciated. Thanks

    Hi
    a. Audio from iTunes - has to be used by a work around
    I do - create a Playlist in iTunes with needed audio
    Burn out as an Audio-CD (.aiff) Not .mp3
    Use this audio in Your FinalCut project
    b. I do from FCE/P to iDVD
    • Export out as a QuickTime .mov file
    • Not selfcontained (not important but saves time and space)
    • NO QUICKTIME Conversion (Important)
    c. To get iDVD to run OK
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk ! (others of no importance)
    • I use Verbatim DVDs
    • DVD-R
    • Burn speed set down to x4 or x1 (only relevant to newer iDVD)
    (Instead download the Hack (Hurz and Pfurz) that makes it possibly to do a DiskImage with iDVD4
    if earlier iDVD versions - forget this
    then save as a DiskImage - test it with DVD-player tool and see that it runns OK
    THEN do the actual DVD burn by using Disk Util tool from this DVD image You just did.
    AND Here You can set down burn speed to x4 or x1.
    • iDVD 4 disc image burning can be enabled through the patch Hurz and Pfurz - search the net.
    Good luck Yours Bengt W

  • Audio drops out after burning to a disk.

    I just finished my Final Cut Express project and used iDVD to burn it to a disk. Half way through the slide show, the audio drops out.
    Is there a way to fix this?

    Last week, this song played fine on the burned copy.
    Is this problem now showing up in the iDVD preview mode? Or is it with subsequent burned DVD's?
    Go back to your project in iDVD. Go to File>Save as disk image. This will create a file that can be viewed on your computer's DVD player. The disk image will show you how your project will appear when played on a standard DVD player. See if this problem is repeated. If everything is fine, go ahead and burn the DVD using Disk Utility.
    I hope this helps.

  • HELP! Audio Drops Out When Trying to Capture Canon XL2 Footage

    Please help me out here. I'm a freelance camera operator w/ a Canon XL2 and several times now I've gotten calls from the editors saying they're having problems logging my footage, mainly the audio drops out quite a bit, and I'm not talking bout one second for every 2 or 3 minutes. No. It's like every 10 seconds the audio drops in and out.
    What's the deal? Two times the guy was using a Panasonic DVX-100A to capture, another time it was a SONY DSR mini-DV deck. With each incident I had to go over with my XL2 and use it as the capture device, which is a pain.
    The program they're using is FCP HD or 5. But I think even when they just play the tape in their Sony or Pany cameras, the audio may still suck.
    Help me out here, I can't be the only one with this problem.
    Thanks.
    -R

    Well Robert Swanson, I hope my post wasn't taken offensively, it certainly wasn't meant as such. The only Canon camcorder I owned was the GL1. After switching to Sony's I can honestly say it would take something significant to go back. And, I was merely relating my experiences in trying to capture from other Canon camcorders so that I know where you are coming from. However, I am interested in the HVX being the "noisest" camera on the market. I am seriously considering this camera and would be interested in a review that points this out. I would be using the hard drive recorder instead of P2 cards.
    Mike

  • Audio drops out when following video to external monitor

    When I play a sequence to an external monitor, the audio drops out for 2 to 3 seconds after changes on the video track, and then pops back in with no interuption in video output. It doesn't happen at every cut, but it's consistent in the places it does. I thought it might be caused by the size the project has become. So I exported the sequence as a quicktime file, closed the lage project, opened a new one and exported the new file and played it and it happened again, even though there were no edits. It doesn't occur at all when I turn off external video, and play it on the computer. I connected a new firewire from the computer to my DV deck, restarted the computer, but it keeps happening.
    Is it that the dramatic change in color, light and compostion crowding out the audios ability to follow the video through the wire?
    I'm completely stumped. The next step will be to open the computer and try to blow any excess dust out. I do this periodically anyway, and my last time was two months ago, so I'd be surprised if it works.
    Maybe the G4 with 2G processing power can no longer handle the program, but it shows no sign of stuggle in any other way.
    My clients are starting to grow restless.

    Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
    I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
    Thanks again,
    jesterhead

  • Audio drops out when scrolling playlists after upgrading new version of 9.2

    Hi Folks,
    Has anyone noticed an issue when scrolling the playlists in Itunes now that the audio drops out for a second.
    I use an external USB audio device by Native Instruments called the Audio Kontrol 1.
    I have watched the processes on my PC and when I scroll up and down on the playlist. Something spikes causing audio to not play for a second.
    I am hoping to fix this somehow as I do not want to roll back (not even sure if you can). I also have heard with dual core processors that occasionally audio can get stopped as other processes take over where in single core processors everything cued up (any truth to that).
    Any help at all would be greatly appreciated.

    Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
    I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
    Thanks again,
    jesterhead

  • Audio Drop out when editing in Waveform / No Multi track File

    Ok so i have a bigger problem. Therefore thats why i am reposting.
    I have a 40 minutes video and the last scene needs alot of audio editing. I am trying to export the 8 minute scene to a Multi Track project for soundtrack pro. When i click send to multi track project, i click "Include background video" however when i click save, it exports then gives me the error "Error Sending Selection to Soundtrack Pro" however when I uncheck the "include background video" i am able to open up soundtrack pro and see all the audio tracks but the video is absent.
    Its just the multi track that i am unable to do. I am able to export as a Audio File Project and still the video. However when i try to do nosie reduction the audio plays for a few seconds then stops.

    Hi Luis,
    Thank you for that.
    Seems like you have a point about the "hardware" issue.  I'm unsure (new to it all) at what data rate my (er...wonderful) fusion drive provides FCPX for smooth playback - or where I can find that info on the iMac.  Playing back movies in the 422 HQ codec seems to have no issues (when I converted the movie from 4444 HQ). 
    But playing the full 4444 HQ, the picture is smooth, but the audio has these drop-outs - even with "best performance" option ticked. Interesting that the audio suffers, not the picture in FCPX - so not sure what's going on there. I also read - perhaps - that to play a smooth ProRes 4444 HQ movie in FCPX the data rate should be min of 500 Mbs (based upon About Apple ProRes) for HD movies and up (i.e. 2k).  ProRes 422 HQ needs a data rate of 220 Mbs - so that is my upper-limit to smooth video&audio playback with the current system I have, I guess.
    Does anyone recommend a fast USB3 or Thunderbolt drive (500Mbs+) where I am able to run 4444HQ movies with no issues to picture or sound (away from the fusion drive)?
    KR
    H.

  • Sync Issues and Audio Drop-out from FCP to DVD Studio Pro

    I have edited a piece in FCP 5.1.4 and all audio/video is in perfect sync. I have been using this program for several years with no issues, until now. Upon exporting with compressor and importing into DVD Studio Pro, the audio is out of sync by 15 seconds and after that first 15 seconds there is simply NO audio, period.
    Any ideas? Please send the calvary...tight deadline and the hanging rope is getting shorter and shorter by the minute!
    Thanks

    Could be something got corrupted in DVD SP (preferences). I have had my audio act strangely and playback getting bogged down. Repairing permissions and deleting prefs works for this one for me. Did you do any recent upgrades to the OS or QuickTime?

  • Audio drops out when for a moment when I hit record

    Is there a way to solve this problem?
    I arm a track to record, press play, then when I hit the record buttin the audio disappears for a second then comes back.
    I'd like to drop in and out of recording by hitting the record button but it doesn't seem that easy?

    Hi
    use the 'Punch on the Fly' function:
    Options:Audio, or click-hold on the Record button in the Transport.
    HTH
    CCT

  • Bluetooth Audio dropping out when Phone goes into screen lock

    I have a 3G running 3.0 and a Sony Bluetooth audio capable car stereo. The audio streams perfectly via bluetooth until the phone goes into screen lock or "sleep ", at which time the audio starts drooping out. As soon as you slide to unlock the screen everything works fine again.
    Anyone else with this issue ?

    Yup, that's exactly what I've had.
    I paired a Jabra BT3030 BlueTooth stereo headset module to my 3G and it worked perfectly until the screen went off and then the audio could only be heard intermittently. When the screen came back on, audio was perfect again. This was completely repeatable.
    I posted about this the other day, but just prior to that tried again to confirm and I could NOT get it to occur. No matter how many times I put the iPhone to sleep and woke it up, the audio played consistently with NO dropout which is somewhat frustrating and a bit bizarre.
    Looks like there is an issue with A2DP if several of us are experiencing the same problem so bug report/feedback to Apple is required I think.
    Has anyone else had the problem go away next time you try?

  • Audio drops out when listening to audio only of a video

    Hi guys, some advice please.
    I've converted one of my music DVDs to play on my ipod - ripped to my hard drive then converted with Videora ipod converter.
    The files play fine in i-tunes and the videos play fine on my i-pod too.
    However, when I play the audio track only [driving in the car] I get dropouts in the audio which appear to be in the same place each time. There's no similar dropout when playing the video as mentioned.
    I don't get this, anyone have any bright ideas?
    Dell Dimension 4600   Windows XP  

    Actually, they're not dropouts as such but pauses in the audio.
    Any suggestions?

  • Motion produces audio drop out in FCP

    I'm working in Motion 2.0.1 with FCP 5.0.3. I'm using a G5 Dual 2.7, 4GB RAM with OS X 10.4.3
    I created a FCP audio/video sequence with multiple clips and exported it as a self-contained QT movie.
    In Motion I used the Glass Panes Open NTSC template...modified some lengths and added a number of additional layers. I dragged and dropped the previously mentioned QT movie into various layers. I used the slip tool to move the clips where I wanted them in the various layers. Everything looks and sounds fine at this point.
    I export the Motion project as a QT movie (self-contained) and import it into FCP. The video still looks great but I get audio dropouts periodically through the movie.
    I've trashed Motion preferences, I've played it only in the QT player with same results. I've gone back and exported the original FCP sequence another time...rebuilt the project again and had the same results.
    Okay, I realize the work-around is to use the original audio while keeping the video portion of what was created in Motion. And of course that's what I've started doing now, but why should I have to go to that extra work?
    Have any, of the many, much more experienced users of Motion come across this problem before. If so what did you do about it?
    Thanks
    Doug

    Stupid, stupid, stupid. Can you guess how I feel? Okay, here's the answer to my own question, and I hope no one else has to waste hours of time like I did on this one.
    When I exported the QT movie of course I used the "Export Preset" for DV NTSC Movie, because that's what naturally pops up in the dialogue box. But guess what ladies and gentlemen, if you're going to use this movie in FCP that's not what you need to do. Instead you need to make the additional step of clicking on the "Options..." button. Once you do this you will notice the sample rate for "Audio" is by default set to 44.1kHz. You need to select the disclosure triangle and then select 48 kHz. Once you do this your QT movies will in fact actually play in FCP.
    Geez, I can't believe I went to all the trouble of re-inserting the original audio where all the drop outs were. Of course now I will begin putting in the new QT movies since the ones I have in there now have 44.1 kHz and that might produce audio drop outs when I print this baby to tape.
    At least I can take solice in knowing that the hour plus I spent with the folks at pro video support didn't arrive with a solution either, and that I eventually figured it out on my own. Can I give myself points for this? Of course not. But I certainly hope I can give someone out there a little peace of mind if ever they come across the same issue.
    Happy Thanksgiving
    D

Maybe you are looking for