Audio Drops after 6.0.5 Upgrade

I've been setting up a 3-node AirTunes network, and after it was all done I decided to upgrade from iTunes 4.7 to 6.0.5.
This completely trashed my streaming to remote speakers - I got frequent audio drops that make the music unlistenable.
So, sez I, "it's time for the Graphite ABS to go - let's go all 802.11g finally. And, just to be sure, let's get an external antenna".
So, I bought an Airport Extreme Base station and antenna.
Now, the problem is worse than ever.
I used to listen happily to music over AirTunes from iTunes 4.7. No drops.
Now, it doesn't work at all.
Any thoughts?

Are you sure it is an Airport issue rather than iTunes truncating your music files?
Songs that used to play through to the end are now stopping after an indeterminate length of time (different for each song file, though AAC ITMS downloads seem to play without a hitch) for me.
I have tried many things to cure my problem but do not have a fix yet.
Or do your songs play as they should within iTunes but only cause you problems within the AirTunes set up. Ignore AirTunes for now and just concentrate on iTunes to determine if the fault lies within this application rather than your wireless set up.

Similar Messages

Audio dropping after capture

I seem to be having a problem with audio dropping out after capturing. When I play the tape back in the camera the audio plays fine so I guess it was recoreded properly on the tape but when I play the captured footage back in FCP the audio drops out here and there. I am capturing from the camera which the footage was shot on (XL2). I've searched the forms for people with the same issue but can't find anything. Anyone have any ideas?

Just to check - are you using FCP4.5 and have recently upgraded to OSX4.9? Because if so that could be the issue; it was for me for something very similar. In which case your options are to upgrade FCP or downgrade OSX.
The other thing you could try - regardless of your system and version - is to capture using Vidi - http://www.mitzpettel.com/software/vidi.php (I only just recommended this to someone, I am not on commission honestly, it's free!)
I have found that Vidi will sometimes ignore timecode glitches etc that FCP is annoyingly sensitive to.

Audio drops after 10 seconds, Airport Express, Windows XP, iTunes

Looking for help with this.
Playing most any song in iTunes via Airport Express. At 9 to 11 seconds into each song, the audio drops out for about 1s, then comes back and continues to the end of the song. Occasionally the audio will drop in other places within a song. Annoying to say the least.
I have updated firmware to 6.3, and updated iTunes.
I have also tried changing almost all the settings in Airport Admin, I have it set to 40 bit WEP encryption, "interference robustness" enabled, multicast @2, and so on. If I change these settings, the problem gets worse.
(argh audio just dropped as I am writing this)
I live in an apartment building with several other wireless networks visible.
Any suggestions?
Thanks in advance.
Brian
Asus Z71V Windows XP

Hi. I also had this problem, running Windows XP with SP2
and the latest iTunes for Windows and the latest firmware
for my two airport expresses. I would get a dropout from
both expresses at around 12 seconds after a song would
start to play. This happened for every song.
I noticed using the Windows process monitor that the CPU would go to 100% at around 12 seconds after a song started.
I located the process that forced this, and it was called
'ashserv.exe'. This is the main executable run by Avast
Secure antivirus software. I'm running the free version.
I changed the level for avast from high level scanning to normal and my problem is gone.

ITunes 11 airplay audio drop after 19 seconds

iTunes 11 on Windows XP using Airplay the audio momentarily drops on each song after 19-20 seconds . Did not happen with iTunes 10. Tried again on my other pc (Win 8 with iTunes 10) still ok there.
Symptom shows up when streaming to Pioneer Airplay receiver and to Apple TV 2. Can stream fine to them from iOS devices (iPad, iPhone4, iPhone 4s, iPod touch 3rd gen)
Any work on this?
Anyone else seeing this?
Thanks

OK, I think I have solved it by following this advice from wesli_1:
To disable IPv6 in 10.7 run the following commands in Terminal:
networksetup -listallnetworkservices
networksetup -setv6off Ethernet
From this thread - An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”. How do I solve this?

GPS keeps dropping after KitKat (4.4) upgrade on Galaxy S3

Since my 4.4 upgrade last month, my GPS drops quite often - pretty much every time I use it. It seems to happen either with the delivered navigation or maps, as well as with Waze. I've tried pulling the battery - no luck. Any other suggestions?

Oh no Eugene78, I apologize that took place. You're correct, this usually doesn't occur and it sounds as if the SD card was corrupted. There are no suggested steps to recover the media. Are you currently having issues with stored data. If so, please send me a direct message with your mobile number so I may further assist! Thank you.
Tominque B.
Please follow us on Twitter @VZWSupport

Audio Drops After Encoding

Hi all,
I created a video in Premiere and sent it to AME to encode. It was a basic edit and everything worked on the timeline before I sent it to encode. After encoding to a 720p 59.94fps H.264 Quicktime, the last 2 minutes of audio on the video disappear. I've checked the audio track mixer window and that track is panned center.. The audio plays fine in Premiere.. I just don't know why it disappeared after being encoded. Can anyone help me to figure out why this happened? It caused some grief for me at work. Thanks!
-Cody

First of all, what version of Premiere Pro and AME are you using on what platform (Win or Mac)?
Can you try exporting your sequence directly from Premiere Pro without sending to AME? Does it work? If it does not work, you may want to try clearing media cache. When none of Adobe applications are running, could you try deleting the media cache folders called "Media Cache" and "Media Cache Files" at
Mac: /Users/<your user name>/Library/Application Support/Adobe/Common
Win: <OS drive>:\Users\<your user name>\AppData\Roaming\Adobe\Common
Then, open the project in Premiere Pro. Please wait all import process to be done. See the Premiere Pro main window's bottom right (see the screenshot below). Please wait till all progress to be done. Can you properly export now?

Audio drops after 7 seconds

Hi members,
I have recorded an audio which has 16 channels through black magic card. When I import thr videos on the timeline and play it stops after 7 seconds. I can scrub it though but play does not work. I'm on windows 8 using PP 7.0.1 with black magic Intensity pro Installed with latest update. I have gtx 650m card fully updated to new drivers, blackmagic card is alo updated and my older project play fine.
any suggestions???

Hi jaycmill,
Thanks for you post. Please go to edit/preferences and check the playback settings and audio hardware settings are set to black magic. Also, please check whether all the audio tracks show the waveform or not.
Regards,
Vinay

Audio stutter after 10.7.2 upgrade

I've just upgraded my Mac Mini 2010 from Lion 10.7.1 to 10.7.2. Never have had any problems with audio and/or video. For some reason when I now play audio (in iTunes, VLC or whatever player from music or video file) or even listen to the OS animated sounds, the Sound stutters (so bad you can't really hear anything). What is going wrong?
My Mac Mini has always been connected via HDMI to a Samung HT and from there on to a Samsung TV. No change in configuration besides software upgrade!?
Running Windows in Bootcamp, audio works fine, so it is definitely new OS related!?

Check to see if the settings in Midi Audio Setup have changed.
I have updated my 2010 and haven't had any issues. However,
my set up is different as my Mini goes to a receiver and then
the receiver routes video to TV.
Have you tried a PRAM reset? May or may not help. I am
seeing in the 10.7 forum some other threads where peoples
HDMI audio has been borked.
If you you have a Time Machine backup or clone, you could
roll back to before the update.

How come my signal strength dropped after 5.1.1 upgrade?

I downloaded ios 5.1.1 to my iphone 3gs,now i am experiencing problems with my signal strength,slower internet speed,and wifi cuts out,have to manually access through general settings.What is causing this and how do I solve it?

See my FAQ*:
http://www.macmaps.com/WIFI1048.html
Check that your clock battery isn't nearing death.
- * Links to my pages may give me compensation.

Audio drops problem iTunes with AE

I set up my AE to my hifi system. When playing music from iTunes, audio drops after 2-3 seconds. When I play a movie in iTunes, sound is fine.
I guess the problem has probably got something to do with sample frequency or bit rates. Any ideas?

I had similar problems with AE. Here my solution:
I have a French (Livebox) DSL modem with Wifi support. My MiniMac is connected to the DSL modem with an ethernet cable and Airport (did not check if I really need both). I have a MacBook connected over Wifi. The MacBook runs Leopard and iTunes 8. I configured the AE through the MacBook. This configuration worked only by using the ethernet cable connection between AE and MacBook. Once configured using the Airport utility with "Wireless Mode'='Join a wireless network' and using a 'manual' configuration, the AE booted correctly up to the static green LED. Streaming audio with iTunes worked corretly in this configuration.
I then wanted to stream audio from my MiniMac running Tiger and iTunes 8. I had the same problems as reported. 2-3 minutes correct working, then yellow blinking LED and again 2-3 green static LED and audio, then again yellow blinking LED.
Goggling sometime I found a site from which I could download older iTunes versions. I deinstalled iTunes8 on my MiniMac and installed iTunes7.4. That solved my problems! I can now stream audio from my MiniMac to AE without interruptions.Conclusion: Leopard + iTunes8 works, Tiger + iTunes8 does not work, Tiger + iTunes7.4 works.

Audio drops out when scrolling playlists after upgrading new version of 9.2

Hi Folks,
Has anyone noticed an issue when scrolling the playlists in Itunes now that the audio drops out for a second.
I use an external USB audio device by Native Instruments called the Audio Kontrol 1.
I have watched the processes on my PC and when I scroll up and down on the playlist. Something spikes causing audio to not play for a second.
I am hoping to fix this somehow as I do not want to roll back (not even sure if you can). I also have heard with dual core processors that occasionally audio can get stopped as other processes take over where in single core processors everything cued up (any truth to that).
Any help at all would be greatly appreciated.

Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
Thanks again,
jesterhead

Problem with audio configuration after upgrading to iTunes 7.5

After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.

Try the instructions in this article.
(26574)

Audio issues after upgrading to OS X 10.10 (Yosemite)

Hello,
I have been facing audio issues after upgrading to OS X 10.10
- No sound in VLC
- Re-booting with Option-Command-P-R did not work
- System sounds are fine
- Quicktime Player works just fine
I tried:
- Plugging in earphones while video was playing on VLC
- F10/F11/F12 while video was playing on VLC
- Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
- Played something in Garage Band (found on a thread elsewhere) and restarted VLC
None of the above solved the issue
Any one else facing similar issue with VLC on 10.10?
How did you manage to fix this?
I am running VLC 2.1.5 btw.
Thanks in advance!

Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
Youtube, QuickTime, all play with no sound at all.

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Video playback slow and audio drop out after render

Hi
I have downloaded a trial version of After Effects from the cc,
Problem is everytime I render ou,t the video playback is slow and the audio drops out
This happens with AVI or Quicktime files.
Using a Intel i5 quad core, 8 gig of ram 250 gig ssd.laptop
Render/export in Premire pro is fine.
Can any one help.
Regards Phil Green
Blue Room Media.

It sounds like you might be hitting the space bar in hopes of getting real time playback. Sorry, but AE doesn't work like that, because it does totally different things from an editing application like Premiere.
And if you've downloaded the tryout version, you really ought to learn how AE works... and a short description is "it doesn't work intuitively". You can frustrate yourself in a hurry.
But this can really help;
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest

Audio Drops after 6.0.5 Upgrade

Similar Messages

Maybe you are looking for