Audio drops after 7 seconds

Hi members,
I have recorded an audio which has 16 channels through black magic card. When I import thr videos on the timeline and play it stops after 7 seconds. I can scrub it though but play does not work. I'm on windows 8 using PP 7.0.1 with black magic Intensity pro Installed with latest update. I have gtx 650m card fully updated to new drivers, blackmagic card is alo updated and my older project play fine.
any suggestions???

Hi jaycmill,
Thanks for you post. Please go to edit/preferences and check the playback settings and audio hardware settings are set to black magic. Also, please check whether all the audio tracks show the waveform or not.
Regards,
Vinay

Similar Messages

Audio drops after 10 seconds, Airport Express, Windows XP, iTunes

Looking for help with this.
Playing most any song in iTunes via Airport Express. At 9 to 11 seconds into each song, the audio drops out for about 1s, then comes back and continues to the end of the song. Occasionally the audio will drop in other places within a song. Annoying to say the least.
I have updated firmware to 6.3, and updated iTunes.
I have also tried changing almost all the settings in Airport Admin, I have it set to 40 bit WEP encryption, "interference robustness" enabled, multicast @2, and so on. If I change these settings, the problem gets worse.
(argh audio just dropped as I am writing this)
I live in an apartment building with several other wireless networks visible.
Any suggestions?
Thanks in advance.
Brian
Asus Z71V Windows XP

Hi. I also had this problem, running Windows XP with SP2
and the latest iTunes for Windows and the latest firmware
for my two airport expresses. I would get a dropout from
both expresses at around 12 seconds after a song would
start to play. This happened for every song.
I noticed using the Windows process monitor that the CPU would go to 100% at around 12 seconds after a song started.
I located the process that forced this, and it was called
'ashserv.exe'. This is the main executable run by Avast
Secure antivirus software. I'm running the free version.
I changed the level for avast from high level scanning to normal and my problem is gone.

Audio dropping after capture

I seem to be having a problem with audio dropping out after capturing. When I play the tape back in the camera the audio plays fine so I guess it was recoreded properly on the tape but when I play the captured footage back in FCP the audio drops out here and there. I am capturing from the camera which the footage was shot on (XL2). I've searched the forms for people with the same issue but can't find anything. Anyone have any ideas?

Just to check - are you using FCP4.5 and have recently upgraded to OSX4.9? Because if so that could be the issue; it was for me for something very similar. In which case your options are to upgrade FCP or downgrade OSX.
The other thing you could try - regardless of your system and version - is to capture using Vidi - http://www.mitzpettel.com/software/vidi.php (I only just recommended this to someone, I am not on commission honestly, it's free!)
I have found that Vidi will sometimes ignore timecode glitches etc that FCP is annoyingly sensitive to.

Audio Drops after 6.0.5 Upgrade

I've been setting up a 3-node AirTunes network, and after it was all done I decided to upgrade from iTunes 4.7 to 6.0.5.
This completely trashed my streaming to remote speakers - I got frequent audio drops that make the music unlistenable.
So, sez I, "it's time for the Graphite ABS to go - let's go all 802.11g finally. And, just to be sure, let's get an external antenna".
So, I bought an Airport Extreme Base station and antenna.
Now, the problem is worse than ever.
I used to listen happily to music over AirTunes from iTunes 4.7. No drops.
Now, it doesn't work at all.
Any thoughts?

Are you sure it is an Airport issue rather than iTunes truncating your music files?
Songs that used to play through to the end are now stopping after an indeterminate length of time (different for each song file, though AAC ITMS downloads seem to play without a hitch) for me.
I have tried many things to cure my problem but do not have a fix yet.
Or do your songs play as they should within iTunes but only cause you problems within the AirTunes set up. Ignore AirTunes for now and just concentrate on iTunes to determine if the fault lies within this application rather than your wireless set up.

ITunes 11 airplay audio drop after 19 seconds

iTunes 11 on Windows XP using Airplay the audio momentarily drops on each song after 19-20 seconds . Did not happen with iTunes 10. Tried again on my other pc (Win 8 with iTunes 10) still ok there.
Symptom shows up when streaming to Pioneer Airplay receiver and to Apple TV 2. Can stream fine to them from iOS devices (iPad, iPhone4, iPhone 4s, iPod touch 3rd gen)
Any work on this?
Anyone else seeing this?
Thanks

OK, I think I have solved it by following this advice from wesli_1:
To disable IPv6 in 10.7 run the following commands in Terminal:
networksetup -listallnetworkservices
networksetup -setv6off Ethernet
From this thread - An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”. How do I solve this?

Audio Drops After Encoding

Hi all,
I created a video in Premiere and sent it to AME to encode. It was a basic edit and everything worked on the timeline before I sent it to encode. After encoding to a 720p 59.94fps H.264 Quicktime, the last 2 minutes of audio on the video disappear. I've checked the audio track mixer window and that track is panned center.. The audio plays fine in Premiere.. I just don't know why it disappeared after being encoded. Can anyone help me to figure out why this happened? It caused some grief for me at work. Thanks!
-Cody

First of all, what version of Premiere Pro and AME are you using on what platform (Win or Mac)?
Can you try exporting your sequence directly from Premiere Pro without sending to AME? Does it work? If it does not work, you may want to try clearing media cache. When none of Adobe applications are running, could you try deleting the media cache folders called "Media Cache" and "Media Cache Files" at
Mac: /Users/<your user name>/Library/Application Support/Adobe/Common
Win: <OS drive>:\Users\<your user name>\AppData\Roaming\Adobe\Common
Then, open the project in Premiere Pro. Please wait all import process to be done. See the Premiere Pro main window's bottom right (see the screenshot below). Please wait till all progress to be done. Can you properly export now?

Audio drops problem iTunes with AE

I set up my AE to my hifi system. When playing music from iTunes, audio drops after 2-3 seconds. When I play a movie in iTunes, sound is fine.
I guess the problem has probably got something to do with sample frequency or bit rates. Any ideas?

I had similar problems with AE. Here my solution:
I have a French (Livebox) DSL modem with Wifi support. My MiniMac is connected to the DSL modem with an ethernet cable and Airport (did not check if I really need both). I have a MacBook connected over Wifi. The MacBook runs Leopard and iTunes 8. I configured the AE through the MacBook. This configuration worked only by using the ethernet cable connection between AE and MacBook. Once configured using the Airport utility with "Wireless Mode'='Join a wireless network' and using a 'manual' configuration, the AE booted correctly up to the static green LED. Streaming audio with iTunes worked corretly in this configuration.
I then wanted to stream audio from my MiniMac running Tiger and iTunes 8. I had the same problems as reported. 2-3 minutes correct working, then yellow blinking LED and again 2-3 green static LED and audio, then again yellow blinking LED.
Goggling sometime I found a site from which I could download older iTunes versions. I deinstalled iTunes8 on my MiniMac and installed iTunes7.4. That solved my problems! I can now stream audio from my MiniMac to AE without interruptions.Conclusion: Leopard + iTunes8 works, Tiger + iTunes8 does not work, Tiger + iTunes7.4 works.

Audio drops out for about 2 seconds after about 2 hours

Hey folks....I've been renting HD movies, and I've noticed a bit of a pattern. Three times now, at some point just after about two hours the audio drops out for about two seconds. It's not exactly the same time - on one movie it was at 2:02:26 and another it was at 2:04:18. It's only two seconds, so it's really of no consequence. Just now it was during the closing credits (the music). Before, it was that scene in Batman where the two ferries are stalled on the river.
Of course, I would rewind to make sure. I use the optical out.
Anyone else notice this?

Do a hard reset. Hold the power and home buttons simultaneously until the Apple logo appears.

T410 audio drops out after 10 seconds

I have an issue whereby audio drops out on the internal speakers after 10-20 seconds. Adjusting volume or mute/unmute fixes things for another 5 seconds before audio drops out again. Headphones work fine from VGA port! Things I've tried without luck:
1. updating the sound driver
2. updating BIOS
3. reseating battery
4. disabled all enhancements in the speaker properties
5. disabled exclusive mode's "allow applications to take exclusive control of this device"
6. there are no "disabled" or "disconnected" devices in sound properties
T410 (model 2522R34)
Windows 7, x64
Conexant 20585 SmartAudio HD with driver 4.95.48.50
A cold beer for whoever suggests the correct fix for this!

Does it happen in Safe Mode?
EDIT: Forgot Safe Mode has no audio. Try launching MSCONFIG and disabling stuff in the Startup tab, then rebooting. Or try a bootable Ubuntu LiveCD.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Audio Drops Out After 30 Seconds

I have just installed Premiere Elements 12 on a new Toshiba with Intel i5 and windows 8. When I play a viedo through Elements the audio drops out after 30 seconds. When I play the same viedo through Windows audio does not drop out. I have an older HP with Intel i3 and Windows 7 running Premiere Elements 10 and I do not have any issues with the audio dropping out. This is the first time I have used this forum so I hopr I'm doing this properly. Thank you, Bob.

With a slower machine like that, it's possible you haven't given the program time to fully conform the audio and video in your file.
Clear the file from your Project Assets and re-add it to your project. Watch the progress along the bottom of the program and wait until it has completed its conforming before you start editing.

Audio drops out when scrolling playlists after upgrading new version of 9.2

Hi Folks,
Has anyone noticed an issue when scrolling the playlists in Itunes now that the audio drops out for a second.
I use an external USB audio device by Native Instruments called the Audio Kontrol 1.
I have watched the processes on my PC and when I scroll up and down on the playlist. Something spikes causing audio to not play for a second.
I am hoping to fix this somehow as I do not want to roll back (not even sure if you can). I also have heard with dual core processors that occasionally audio can get stopped as other processes take over where in single core processors everything cued up (any truth to that).
Any help at all would be greatly appreciated.

Thank you so much X & Paul, for your suggestions. Although they didn't solve the problem, they kept me hopeful enough to continue my quest for an answer. After exhausting all effort to find the problem in the audio, I decided to focus on the video. So, I tried correcting the excess luma on the consolidated QT movie, and suddenly the problem was fixed. Because of the different levels of correction I'd need for each and every cut in the original sequence, and the precious time it would take, I'd planned to save it for the color correction stage, a mere 2 weeks away. I remembered how illegal white would often cause the image on some monitors, specifically consumer TVs, to waver for a second. But this was happening all the way back to the DV deck's audio meter, so I never expected it to be a luma issue.
I assume that the outdating capacity of my G4 played a part, but I wanted to write back with my thanks, and to impart my illuminated wisdom to the next perplexed soul.
Thanks again,
jesterhead

Audio drops out for a second at the start of the song

I have an 8gb Black Nano 3g. My first time syncing I added songs, video, and photos.
The problem I am having is after selecting a song through cover flow the song will start playing and around the 17 second mark in the song the audio drops for a second then it comes back on and continues playing. At first I thought it was the song file, but it was happening to multiple songs. I also verified the tracks on my computer were fine.
I updated the firmware and Restored the iPod software.
Since my iPod had all of my media wiped out I added back only music and tested it. It worked perfectly, no more audio drops. I listened to it all day just fine. Last night I added some new video clips and photos. Audio drop out problem has now returned.
After work I am going to remove the video files and test it again.
Has anyone else noticed this issue?

Yes I have the same problem, actually I'm guessing everyone has the same issue but everyone hasn't realized yet. Problem occurs just after the the backlight turns off.
After many hours of troubleshooting, I realized the cause is syncing photos.
Tried resetting iPod & and restoring many times, tried different computers (with different new test iTunes/iPhoto libraries), problem occurs with both iLife 2006 & iLife 2008.
Took back to Apple Ginza store in Tokyo for testing and a different iPod nano 8GB 3G has the same issue. Staff believed it was a firmware issue and filed a report. A few days later 1.0.1 firmware was released but still didn't fix the issue.
I have yet to file a bug report with Apple myself.
My screen also seems to be rotated about 1mm.
Andrew.
"I have from an early age abjured the use of meat, and the time will come when men will look upon the murder of animals as they now look upon the murder of men."
-- Leonardo da Vinci

Audio Drop out @ every 2 seconds

Having issue with the Audio dropping out every @ 2 seconds, indepentant of source (local, sync'd computer and web trailers). Have done factory reset, still doing the same thing. AppleTV is connected to the TV through HDMI connection.

Try turning your tv (not tv) off and on.

Audio drops every few seconds?

I have a sisco box, and tonight its starting to drop the audio every few seconds. Kind of like its a skip.
I reset the box and all that and its still doing it, does this mean I need a new box?

This is rarely an issue with the box. Its either an issue with the channel, the signal leading to the box, or the signal between the box and his TV. Is this still happening? If so, is it happening on other channels as well? Please let us know so we can assist further.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

UPDATE: Audio dropping out in places after publishing MP4 in Captivate 7

UPDATED: Bumping this up thread, in the hopes someone will see it and reply. No one has any suggestions? I'm really struggling with this and getting super frustrated. Anyone from Adobe reading this? Thoughts? Thanks in advance for any help that can be provided.
I've had this issue on other tutorials I've done, but today I'm at my wits end.
I have a short presentation (3 slides - about 2 1/2 minutes total). The slides were imported from PowerPoint. The audio was recorded directly in Captivate. I've made sure to leave a bit of silence at the beginning and end of each slide.
The audio in preview is perfect. When I publish as a SWF or HTML 5 files, the audios is perfect. Unfortunately for me, I need the output to be MP4. When I publish it as an MP4, on the second and third slides, the audio drops out in several places - the first slide is fine. it does not occur at the beginning or end of slide, it's sporadically within the audio.
For instance, it will be something like this "First look at the feed display (in the middle of the) page. It's divided into (three) sections. In the (federation feed section) you'll find the (activity), and updates across the interoffice (user base), in the My Feed section you will find a filtered set of (discussions based) on your interests."
The words in parentheses would drop from the audio. I've force republished 10-12 times today. Each time, the audio chooses to drop out different words - occasionally the same.
There seems no rhyme or reason to what's occurring. Help! I'm on a really tight deadline.
Can you recommend any fixes or settings that may help this? It feels like a crap shoot - I just keep trying different things and hoping that eventually I'll get something usable.
Thanks for any help or suggestions you can provide.
PS I've also copied the slides into a brand new project and had the same result when publishing.

Have either of you tried deleting the preference files and then running a disk repair?
Quit iDVD.
Locate a file named com.apple.iDVD.plist and get rid of it. iDVD will create a new one the next time it runs. Empty the trash and run a permission repair using the Disk Utility.
The files can be found here:
-->/Users/YourName**/Library/Preferences/com.apple.iDVD.plist
Sue

Audio drops after 7 seconds

Similar Messages

Maybe you are looking for