Audio Drops at About 7 minutes from video

I am burning an 1:55s movie with idvd
its a lecture and it play basically in its entirety. Only small edits were made and the audio and video works fine in all previews
With about 7 to 5 minutes left in the video the audio drops out. No music was added, no extra files. Cannot understand what happened
Project info seems ok nothing is in the red the files fit on the dvd and its burning at professional quality with 1x burning speed.
Any options?
And no im not using verbatim discs yet Magnavox dvd+r
Help please,
thanks for all your help,
-Alex

Hi
Free space on internal start-up hard disk. How much ?
Yours Bengt W

Similar Messages

Question about taking Images from video in FCP

I just recently upgraded from pinnacle to FCP 7 and am loving it. My question is when I try to take a still Image from video using Quick Time Conversion, the image comes out blurry or with bars around the edges of people. At first I thought It was because I was trying to capture a moving Image, but then I tried it with someone standing still and I ran into the same problem.
I shoot with a Canon XH-A1

Take the exported file to Photoshop and use Image Size to correct the aspect ratio of the image. Apply the Deinterlace filter in Photoshop to remove the interlacing.

Audio stops after about 5 minutes

After rendering/encoding, the sound on my finished DVD stops after approximately 5 minutes. It is fine on iMovie, and also is there in iDVD when using preview.
In contrast to other posts in this forum, there are no slide shows on my DVD, and all sound comes from the camcorder together with the video.
I am using "Create Disc Image", and I have tried both playing back with DVD player from that very disc image, and actually burning it on a DVD and playing it back from there.
I have also thrown out the whole iDVD project and started from scratch by creating a new project from iMovie.
Since my DVD is just about 60 min, I have also tried both "quality" and "performance" encoding - same result.
The audio stops in the middle of a 4-min clip as defined in iMovie.
I am using iDVD 5.0.1.
This process (importing from camcorder, editing in iMovie, building menus etc. in iDVD, creating disc image, burning) is something I have done for several DVDs previously without problems (but maybe with iDVD 5.0)

Thanks for your help! You helped solve the issue, albeit indirectly...
At this point, I want to share my experience, in the hope that it might be helpful to others:
After finding that chapter markers had nothing to do with the problem, I found that indeed my camcorder was set to the dreaded 12 bit. Oh dear! The original DV tape is long gone. (At first I did not expect this to be a problem, since I had made several DVDs successfully with the existing settings, but then there are all these horror stories in discussions about what 12 bit can do to you.)
So to rescue my movie, I found advice to "share" my iMovie back to a fresh DV tape, and then re-import it with the 16 bit setting.
This lead to the next issue: After a number of minutes of re-exporting to DV tape, the video received by the camcorder would freeze, while the audio continued. This happened at several different points in several differerent attempts.
So next I visited iMovie discussions, where I found advice to clean up my Mac. I used Mac Sweeper, and now indeed my Mac runs faster and smoother for many apps. I also downgraded my QuickTime version. But another attempt of exporting from iMovie to DV tape also failed, but now it failed at exactly the same point where the audio stopped in my DVD!!! (Even though on the export-to-DV-tape it was not the audio but the video that froze.)
Next I found that when playing that problematic scene in iMovie, the iMovie program would also freeze at that very point, making it necessary to "force quit" out.
In the end the solution was to chop out the problematic bit in that scene. Now everything works fine, including the iDVD step.

No audio on Apple TV when streaming from video app

Since the last update I no longer can hear audio from movies streamed from the video app. Music from iTunes comes through, but no video audio. This has only been a problem since the last update. Apple, please fix this!

See if any of the fixes here helps: http://appletv2.com/apple-tv-no-audio-fix/

CC Audio plays out of lip sync from video - Version 6 plays fine.

If I place a single DV NTSC video clip in a timeline in Premiere Pro CC (7.0.1 (105)) - the clip is out of lip sync. I have tried software/hardware rendering with no change.
If I open the same DV clip in a timeline in Premiere Pro 6 - the clip plays fine.
I of course cannot open the CC clip in version 6. All I am doing here is placing a single DV clip in the timeline to cut new start/end and export to MP4 - no effects, filters, nada. I noticed the MP4's were out of sync, then noticed the originals would not play right in the timeline.

I cleaned the cache and re-opened the project - no difference.
On all four of the clips I was working with the video was 5 frames early, so I ended up unlinking everything and shifting the audio 5 frames and exporting.
I also noticed I am not seeing the closed caption display. I am going to uninstall/reinstall CC.

Levels of audio drops (audition to premiere to final video)

Ok, I export from Premiere to Audition. Mix there and set the peaks to -6db.
When re-export to Premiere the peaks change to -9db.
And when export for final product (and mp4 file) the peaks change again to -12db.
So I am loosing 3db in every export.
Did anyone have this problem and found an explanation / solution?
thanks

"A Bars & Tone Clip in the Source Monitor displays XXdB in the Levels meter.
Same Clip displays XXdB-3dB from the Timeline in the levels meter."
Yes.
But I found what is wrong. My sequence is DNxHD 220x. That I chose to use the previews in export. And the audio tracks in this option are set by default in mono 48Hz and 16bits. And I have stereo 48Hz 32bits. Now I made a new sequence this time changing mono for standard and the problem disappeared.
A silly mistake on my part.
Thank you very much for the help.

TS1398 Our work connection to WPA-Enterprise now drops after about 5 minutes.

The wifi now has to be constantly reconnected. This only started happening after the IOS 6 update. Is nobody else experiencing this?

It turned out the problem apparently was that Apple dropped support for TKIP encryption. My problem was just with WPA\WPA2 Enterprise authentication. By replacing TKIP with AES the problem went away. I don't know if this was an undocumented change but a lot of users have been effected.

What is the best audio level for making a CD from video?

I know that -12dB is the optimum level for making a DVD. When I took this same level (peaking at -12dB), exported it to AIFF and then put it into iTunes and burned a CD, the volume was definitely lower than other CDs.
Does anyone know the standard level for CDs?
I'm doing this to convert a video of a concert into a CD.

The standard for CDs is basically -0.1. Generally, at least with pop & rock, the mastering stage puts the levels as loud as they possibly can be without distorting.
Plus, with content like music that is a little more consistent (level-wise) than dialog, SFX, etc., it's easier to ride it up closer to zero.

Preview in iDVD fine, audio drops off in data image or burned DVDs

Playback in Final Cut HD Express and iDVD preview works perfectly. I create a DVD image and the audio drops out the last minute of a 39 min program. The movie file source in iDVD is DV/DVC Pro. I did a Quicktime conversion from Final Cut using High Quality H.264 and the audio remained but the quality was awful. I did a program info in iDVD and the DV movie did not eat up too much space in iDVD so that's not an issue. I have 28 avail. GB in my external drive where the project is located so not an issue.
I have 23 GB left in my internal drive so that wouldn't be an issue either.
The Apple Store techs were stumped.
The audio that goes missing in the data image and a DVD I burned was a fade out done on Final Cut. There is a blue line on the timeline, but if that was an issue then it wouldn't play back in iDVD. It DOES play back perfectly in iDVD. Somewhere in the conversion from iDVD and a data image or DVD messes with that audio. Any hints?

No definite suggestions, except for things to try (might they count as hints?):
Before exporting from FCE, did you mix down the audio? (Sequence>Render Only>Mixdown).
Did you export a reference movie, or a self-contained movie? Whatever you did, you might try the other.
What versions of FCE, QuickTime, iDVD? Some recent QT updates have caused strange things to happen in older versions of FCE.

Mp3 audio file restarts after 5 minutes

When listening to an .mp3 audio file from Internet, the audio only plays about 5 minutes, then starts again from the beginning. The same behaviour occurs on both my iPAD (mit Retina DIsplay) and iPhone 5. Any ideas why?

Restore the phone from Recovery Mode as described here: http://support.apple.com/kb/HT1808

HT1657 rented movie audio stopped at around 30 minutes!

the audio on movies i rent stops after about 20-30 min of watching? the video continues.. it happens during dowmload and after it is complete..anyone have a clue?

Hello rockdoggy,
It sounds like you are renting movies and the audio will stop about 30 minutes in. I recommend the troubleshooting for Windows 7 in the following article:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Also, if you have not been able to finish watching a rental because of this issue, I would also report an issue to our iTunes Support team directly:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
All the best,
Sterling

IdeaPad U550 touchpad frezes after 1 minute from start up

After 1 year of using my IdeaPad U550 without a problem, I experienced the folowing problem: touchpad is freezing after about 1 minute from power on. Also if i want to use an external mouse the same thing happens. I tried using the OneKey Rescue system option to return to the original factory status but I couldn't because the mouse isn't working.
I noticed that the 1 minute window of using the mouse is no longer available if I do a quick restart. I had to power off for a couple of hours to make the mouse work again for 1 minute.
Please help me solve the problem!

try to un-install drivers, restart your computer and let windows install the drivers automatically.
by the way, usb devices working properly except external mouse?

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

HT1551 I'm able to watch netflix's for about 15 minutes then the video goes black but I still have audio.

I just set up my Apple TV. I'm able to watch netflix's for about 15 minutes then the video goes black but I still have audio.

Is it always at the 15 minute mark?
To make sure it's not a connectivity issue
What is your connection via speedtest.net?
Check istumbler or netstumbler for interference
Make sure DNS is set correctly (settings - general - network - configure DNS - automatic)

Burned mov file of finished video as always but on playback there is a sudden loud audio feedback-type-buzz about a minute into program. Wisdom?

Burned mov file of finished video as always but on playback there is a sudden loud audio feedback-type-buzz about a minute into program. Wisdom?

Thanks for all your help and thorough answers. After trying several things
without success, I ultimately just rebooted the system and...bingo...the
problem went away. It was such an unusual problem that it just didn't occur
to me that it would be that simple. Sometimes it isn't. I appreciate your
working to help me deal with this.
Keith
On Wed, Aug 6, 2014 at 12:45 PM, Kevin Monahan <[email protected]>

Audio Drops at About 7 minutes from video

Similar Messages

Maybe you are looking for