Audio ducking : is there a way to hide the original footage's sound? Its grey-ed out.

My original footage's audio needs to be removed. I would love to just take it out but if I need to cover it up with ducking thats ok too. How do I hide the original footage's sound? I turned each clip to 0% but its not working.

Tim,
You might try including the IFERROR function in your expression. This will suppress the error message.
Jerry

Similar Messages

Is there a way to hide the reading pane in iPad mail after a message is read?

Is there a way to hide the reading pane in iPad mail after a message is read?

Selecting a different email will change what is displayed. Tapping the Home button will take you back to the Home screens. Tapping the power button on the top of the iPad will put it to sleep. Those are pretty much your options.

Is there a way to hide the name of the sender of a text message?

Is there a way to hide the name of the sender of a text message?

If the sender's name is not in your Contacts only the number will be shown, not the name.

Is there a way to hide the SSID?

On my old Linksys router I could choose to not broadcast the SSID as a form of added security (a hacker won't hack what he doesn't know exists). Instead of it showing up in the list of available networks, you had to type it in manually.
It finally broke and I bought an AirPort Extreme which I just set up a few minutes ago. Created a new network, new password, etc. But there doesn't seem to be an option to not broadcast the SSID that I could see.
Is there any way to hide the SSID from people looking for available networks?

Eric wrote:
Is there any way to hide the SSID from people looking for available networks?
yes.
launch *airport utility* and enter +manual setup+ for your device. go to the wireless tab and click on +wireless options+. find the check box for +create a closed network+ and update the AEBS.
edit: don't be fooled, though. clients connected to a hidden (closed) network still broadcast the SSID openly. there are a number of freely available tools out there that can pick up a hidden network in a snap.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Is there any way to hide the column header in BW workbook?

I have inserted a query into a workbook. But I don't want the column header to be shown. Is there any way to hide the column header? Thanks.

Hi,
If you want to do any custom formatting to the workbook and you do not want it to reset when you refresh the workbook,
You will have to You can deactivate the function for adjusting the formatting (Adjust Formatting after Refreshing) in the Display Options of the Query Properties.
When you do this, you can have your own formatting for the workbook and it will not be affected when you refresh the workbook.
Regards,
Joe

Re: Is there a way to hide the launcher in Win95?

If you read the Systems Manager manual you can find how to use the short cut to
start your application using the ftcmd or ftexec.
The following is an example of one that I use.
C:\forte\install\bin\ftexec.exe -fi bt:C:\forte\userapp\APPWIN\cl0\APPWIN0 -fns
SYSNAME:5000
Hope this helps.
Mike Moran
Longs Drug Stores
Joseph Mirwald wrote:
Hello forte-users,
i am wondering if there is a solution to hide the launcher in the
task-line of Win95 without additional tools.
I need a way to start the launcher as system-service or in a manner
that the process is not shown in the Win95 task-line after startup
the computer. Because if more MS-DOS-tasks are open some users clean
the task line using close with the right mouse-button to close those
tasks without looking which kind of process it is. And sometimes they
close the launcher also during run of a forte-application which makes
it impossible to continue some work in this application :-).
Every little help is welcome
Joseph Mirwald

I'm guessing what really needs to be closed is the launch server window,
right? That's the one that runs as an "MS-DOS" box in the task bar.
The launcher is just the little applet that can run other applications.
As far as we have been able to discover here, the only way to make the
launch server close after the application exits is to code it into your
application. Forte doesn't really want to close it though, because it is
used to fire off any and all application that get run using "ftcmd" or
the LaunchService.RunApplet method call.
If you don't need to use Forte's application distribution mechanism
(i.e. having it create icons in "Forte Applications" for you), you can
do as mentioned earlier and run things as an "ftexec" instead of an
"ftcmd".
It would be nice if Forte let you decide what type of icon you want it
to create when you install an application on a given node.
Sam Yates
Systems Analyst
Amgen, Inc
[email protected]
-----Original Message-----
From: Dustin Breese [mailto:[email protected]]
Sent: Friday, July 24, 1998 10:36 AM
To: [email protected]; [email protected]
Subject: Re: Is there a way to hide the launcher in Win95?
Joseph,
Try setting FORTE_LAUNCHER_CLOSE=TRUE. This is supposed to
shut down the
launcher after an application is launched. The default is FALSE.
You can hide the console window when launched via FTExec by:
aW : Window = new();
aW.windowsystem.ConsoleWindowDisplayState = DS_HIDDEN;
Hope this helps!
Dustin Breese
PerSe Technologies
From: Joseph Mirwald <[email protected]>
Date: Fri, 24 Jul 1998 09:26:32 +0200
Subject: Is there a way to hide the launcher in Win95?
Hello forte-users,
i am wondering if there is a solution to hide the launcher in the=20
task-line of Win95 without additional tools.
I need a way to start the launcher as system-service or in a manner
that the process is not shown in the Win95 task-line after startup
the computer. Because if more MS-DOS-tasks are open some users clean
the task line using close with the right mouse-button to close those
tasks without looking which kind of process it is. And sometimes they
close the launcher also during run of a forte-application which makes
it impossible to continue some work in this application :-).
Every little help is welcome
Joseph Mirwald
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I created an iDVD through iMovie on one computer in my home and want to edit the slideshow and delete some videos on the iDVD. However, I want to work on my own iMac. Is there a way to "share" the original project through the drop box on my computer?

I created an iDVD through iMovie on one computer in my home and want to edit the slideshow and delete some videos on the iDVD. However, I want to work on my own iMac. Is there a way to "share" the original project through the drop box on my computer?

Sir Churchill, I tried deleting one of the playlists from my computer (Playlist 130). The next day I checked my wife's computer and noticed that Playlist 130 was now missing from her computer as well. Is there a way that I can delete a playlist from my computer without it disappearing from hers as well?

Recently "lost" a purchased song, (Plus the accompanying artwork) from my i-tunes library, after upgrading my O.S. from windows XP to windows 7. Is there any way to get the original song back, or, at least, re-purchase it?... I tried t

recently "lost" a purchased song, (Plus the accompanying artwork) from my i-tunes library, after upgrading my O.S. from windows XP to windows 7.
Is there any way to get the original song back, or, at least, re-purchase it?... I tried to do the latter, (It's still available in the itunes store) but, when I clicked on the buy link, I was informed that I had already bought it and was only given the option to, either, copy the link or send it to Facebook/Twitter
I also, inadvertently, deleted a couple of default playlists (Notably recently added) while attempting to get the song back.
Can someone out there, please, help me out. with the solution(s). (preferably step by step if possible, as I'm a bit of a Homer Simpson when it comes to this sort of thing) .. Doh!! :-(

Hello, MrKite549.
Here is an article that will walk you through download any past purchases that are missing from your iTunes library.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Cheers,
Jason H.

I am trying to crop faces from old family group photos and paste them on to records in Family Tree Maker. When I do this, the pasted cropped image reverts to the original of the entire family. Is there a way of unlinking the original version from the crop

I am trying to crop faces from old family group photos and paste them on to records in Family Tree Maker. When I do this, the pasted cropped image reverts to the original of the entire family. Is there a way of unlinking the original version from the cropped image?

Are you copying the cropped images directly from Aperture's Browser window and then pasting into your family tree?
It would be safer to export the cropped faces as new image files to a folder on your disk, and then drag them from there to the "Family Tree" window.
To export select the cropped image versions in Aperture's browser and use the command "File > Export > Version". Select a suitable export preset from the pop-up menu, for example "Jpeg fit into ..." and select a folder to export to.
Regards
Léonie

Is there a way to hide the tab bar on my I Pad 2 in IOS 5?

Anyone know of a way to hide the tab bar in an I Pad 2 using OS5? It wasn't there on the previous operating system.

I can only assume that you are talking about Safari and the answer is no. Safari now uses tabs. If you want a tab free browser, download iCab. You can use tabs or you also have the old Safari way of browsing open web pages at your disposal. Another rally nice feature is that you can swipe from one open web page to another open web page. It also has a ton of other features that Safari does not have.

Is there any way to hide the menu bar?

I've been trying to find out if there's a way to hide the menu bar unless the mouse pointer is pushed up to the upper edge of the screen, I know there are third-party applications that let you do this (Menufela which uses Application Enhancer that I prefer to avoid as it is causes more problems than it solves as far as I'm concerned), I also know that it's possible to write applications that cause the menu bar to exhibit this behaviour while they're focused.
But what I'm looking for is a way to make it behave this way all the time without installing Application Enhancer and having to deal with all the headaches that come with it.

serioustrouble wrote:
It does seem odd that you can't get the menu bar to hide itself though, I seem to recall something about editing certain files in .app directories to make it hide itself on an app-by-app basis.
To hide the menu bar for a single application, you need to modify the Info.plist, as described -> here <-.
This will work on nearly every application. Only on a very few applications it will cause incorrect behaviour, mainly Finder.app.
So a simple way to realise your wishes, is to create an Applescript, that will "hide and unhide" the menubar for a couple of apps at one time.
Here a demonstration example: Choose one or more apps. Menu bar will be hidden/unhidden:
<pre style="
font-family: 'Courier New', Courier;
font-size: 12px;
line-height: 1;
border: 2px solid #1E90FF;
width: 700px; height: 200px;
color: #000000;
background-color: #F5FFFA;
overflow: auto;">
on run
set xyz to choose file default location (path to "apps" as alias) with multiple selections allowed without invisibles
repeat with i in xyz
set appName to name of (get info for i)
if appName ends with ".app" then set proName to text 1 thru -5 of appName
tell application "Finder"
try
if exists (process proName) then
set x to display dialog "Is " & "\"" & proName & "\"" & " still running? If so, please quit it now!" buttons {"Cancel", "Quit it!", "No! Not running!"} default button 2 with icon 0
end if
end try
end tell
try
if button returned of x is "Quit it!" then
tell application appName
quit
end tell
end if
end try
try
((i as Unicode text) & "Contents:Info.plist") as alias
set infoPlist to quoted form of POSIX path of ((i as Unicode text) & "Contents:Info")
try
do shell script "defaults read " & infoPlist & " LSUIPresentationMode"
do shell script "defaults delete " & infoPlist & " LSUIPresentationMode"
on error
do shell script "defaults write " & infoPlist & " LSUIPresentationMode -int 4"
end try
end try
end repeat
end run
</pre>
Spażek

Is there a way to overwrite the ORIGINAL songs with my iTunes library info?

Hi there,
I would like to know if there is a way to overwrite the original songs with my iTunes library info? What I mean is, I have MANY songs that I have transferred to iTunes (and were obviously not purchased from iTunes) and I always put the info (such as the album name, the album art, artist, composer, etc.) and it leaves the original song (like the songs that are in "My music" section that is in "My Documents") with the same info. For example : The song that I put into the library will be "chamiionaire feastureing flip"... and in the iTunes, I put it as "Chamillionaire ft. Lil Flip". How do I make it so that it replaces the "original" info (located in my documents) with the info I put in?

Same question. Used to have an iPod. Lost it (best digital player ever), now I use other portable device. The mp3 files have their id3tag edited in the original file, but the .m4a don't!.
Want to know someway to write the info from the library to the original .m4a files.

Is there a way to retain the original date after editing?

I am using PSE 11 on a MacBook Pro, OS X (10.3). I have a lot of old pictures to edit, and they are in date order, which is how I want them.
However, when I edit a picture and save it, it moves it to the bottom, with today's date instead of the original date. I have them set to save with the original as a version set.
Is there any way to retain the orignal dates, short of having to go in and reset the date on every picture after I save it? I really want them to be in date order under their original dates.
BTW, I used earlier versions that were Windows-based, and this didn't happen. When I saved them, the version sets stayed where they were.
This is really frustrating!

SK Prairie Chicken a écrit:
I'd like an answer to this too.
What's your problem exactly?
The 'date taken' is never changed by editing a picture.

Is there a way to force the Tag Engine to dump its input buffer to the database?

I have an application where I start a process and log the data, and then call a subVI that uses the Read Historical Trend VIs to get all of the data from when the process started until now. The problem is that the Historical Trend VIs only read from the database on disk, and the Tag Engine's buffer doesn't write to disk until it's full (or possibly times out; I'm not sure about that, though). Is there a way to force the Tag Engine to write to disk, so that the Historical Trend VIs will return the most recent data?
Shrinking the buffer will help a little, but that will only result in missing less of the most recent data. One possible hack is to have a dummy tag that I simply write enou
gh data to that will cause the buffer to be written to the database. I was hoping for something more elegant, though.

That's a good question.
The control about the datalogging and the DSC Engine is all done (more or less) automatically - you feel the NI ease-of-use idea
That means the Citadel service (one of the NI Services installed by LabVIEW DSC) is responsible of taking care about the datahandling (writing to and reading from the database files including caching some data e.g. index files, frequently used data...).
The DSC Engine makes a request to the Citadel service that this data has to be logged. Everything else is handled by the Citadel service. Internally, there are two kinds of logging periods handled through the Citadel service. One for traces being viewed (a small period: 200ms) and one for traces not being viewed (slow (big) log period: 20000ms). That
means, if Citadel gets a request to store a value it will buffer it and store it as soon as possible depending on other circumstances. One depends on the fact if this trace data is being viewed (e.g. with Read Histroical Trend.vi) If you request/read to view a trace you should pretty much see the current values because citadel should use the fast log period.
The Citadel service takes care as well about setting priorities e.g. the writes before the reads (We don't want to loose data - right?). That means if you really stuff the system by writing a lot of data the CPU might get overloaded and the reads will happen less often.
If you really want to see "real-time" data I would recommend to use the "Trend Tags.vi". With this approach you avoid the chain DSCEngine-Output Buffer-CitadelService-InputBuffer-File-HD... and back.
I hope this info helps.
Roland
PS: I've attached a simple VI that has a tip (workaround) in it which might do what you are looking for... However, Nationa
l Instruments cannot support this offically because the VI being used are internally DSC VIs that certainly change in the next version of LV DSC... and therefore you would need to "re-factor" your application.
Attachments:
BenchReadHistTrend.llb ‏104 KB

Now that the "Status Bar" is gone, is there a way to hide the "status notification" (bottom left corner) when a page loads? This is on Windows & FF5/6

The so called "Status Bar" has apparently gone away since FF4, I'm now onto 6 I think, on my work machine. But one of the things I liked about the Status Bar was that it could be hidden entirely.
With no Status Bar, now when a page is loaded in FF, you get a floating "Status Notification" in the bottom left corner for a second or two while the page is loading (this even happens in FullScreen F11, something I never had to deal with when the Status Bar existed).
What I want to know is, is there a way to turn off this "Status Notification" entirely? A setting somewhere? Something in About:config? I haven't been able to find anything.

1. Install the addon Status 4 evar, which puts the status text back in the status bar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
2. Hide the status bar by right clicking the refresh button and unchecking "Addon bar"

Audio ducking : is there a way to hide the original footage's sound? Its grey-ed out.

Similar Messages

Maybe you are looking for