Audio error after publishing or while previewing a project

I have a very large project with branching. When either previewing or publishing (to flash), I have a section of slides that do not play their own audio, but rather, play audio from another part of the course. This happens for 5 slides in a row, the project seems to right itself.
When I preview the affected slides alone, they play as expected and I don't have any other audio files attached to any elements on the page. The minute I try to view the entire project seems to be when the error comes up.
I am using Captivate 4, and the audio is created using the text-to-speech option. I've  cleared out all unused audio files
Thanks for your help!

Thanks for the reply!
I already had some gap between the start of the slide and the audio files. I went ahead and made the audio start after the slide had been going .5 seconds, but unfortunately I still have the same problem.
I've recreated the slides and deleted the ones that were giving me problems and the problem is now fixed. That wouldn't have been fun if it were many more slides to rebuild.

Similar Messages

  • Captivate 3 audio problems after publishing...

    Help please... having problems with audio getting messed up after publishing.  I'm recording all audio w/in Captivate3. When I publish and put on our browser, the audio is missing on some slides, also if you pause for FF the video, the audio sometimes is overlaping, or not in sync.  Any suggestions?
    Thank you
    Bev

    Hey Luke,
    I apologize for not getting back sooner, been swamped at work and I'm
    moving. OK here is my laundry list of bugs and nice to haves:
       - BUG - If I add silence to the beginning or end of a wavelength, it
       gets cut off when I save and close the wavelength. I then have to reopen
       the wavelength and add it back in and save it again. If I don't add silence
       the audio gets cut off when I publish. This has to be done for every slide
       I have and it's very repetitive.
       - BUG - If I create a movie over say 45 slides, the slides bleed into
       one another and images are lost or added to the next slide. If I use Fade
       for the transition it's even worse.
       - BUG - If I use Fade for a transition between slides with characters
       the characters bleed from one slide to the next.
       - NICE TO HAVE - The ability to set Preferences for characters per
       project or for all projects. For example, set the size and duration
       defaults.
       - NICE TO HAVE - It would be nice to have the default tab on the audio
       wavelengths be Edit not Add or Replace. I do a lot of narrating so having
       to click Edit for each slide becomes tedious.
    OK, I want to be clear that I'm not beating up Adobe programmers and I do
    LOVE the tool. It would just be a smoother experience if the above worked
    or were in place. I do also have to add that I love all of the new widgets
    and games!!! Haven't had time to explore them all, but I will soon and I'll
    let you know more when I do. BTW are you sharing these email threads with
    Adobe? Maybe we should put this online, what do you think?

  • Double playback of audio files after publishing

    Hello,
    I'm having an issue with audio playback.  Once I publish the project, the audio files play back double, with the second one starting about 3 seconds after the first.  If I pause the project, one of the audio files keeps playing.  I removed the auto play function, but no change.  I would greatly appreciate any tips if anyone has experienced this before.
    Thank you!

    Hi Anjaneai, Thanks for the response.
    I don't have any text captions in this project, the entire thing is from PowerPoint, where the audio files worked perfectly fine.   I also checked the use count, everything reads as "1"... I also tried to begin from scratch with just one slide and one audio file, and the same thing happened.  I'm beginning to think my audio files are corrupted.  (However, they play fine in itunes and powerpoint).  I converted them from mp4 > mp3 with an online converter... might just be the problem! I'm going to download a trial of premier and see what happens with that!
    Thanks for the help,
    Jaime

  • Crystal report "Failed to load database information" error after publish

    I have seen similar questions, but none of the answers seem to apply to my situation.
    I am upgrading an older web application to Visual Studio 2013, using the SAP Visual Studio Crystal Reports tools. Everything works great until I publish.
    I have two sorts of reports: Some that export to Excel, and some that export to PDF. All work fine within Visual Studio. However, when I publish, the reports that should go to PDF give me the following error.
    Failed to load database information.Error in File [Report Name] {GUID}.rpt
    I have seen several posts that indicate that this could be a 32/64 bit issue. I am using a newer 64 bit SQL database, and this is an old application. I have it set to Any CPU. However, since the reports work fine in Visual Studio, I don't see how this could be the issue.
    Any other ideas?
    Thanks,
    Geoff Callaghan

    Hi Geoff
    This is definitely not due to the export type. Rather it will be due to a db issue of some sort. My suspicion is that reports that work use a different type of connection that reports that fail. E.g.; the reports that work use OLE DB, those that fail use ODBC and the ODBC datasource is 32 bit, not 64 bit(?). E.g.; check the database connections between reports that work and those that do not. And remember to also check the connections in subreports (if any).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Quicktime Audio Disappears after Publishing

    Hi -
    I'm using iWeb 09; I have long been using iWeb to publish my website - part of that has been uploading mp3 files for people to listen to.
    My problem is suddenly my files, which play perfectly in iWeb, don't even show up on the page after I publish it. Previously, when the page first loaded, the Quicktime symbol would appear under the image placeholder until the file loaded and then you could play it. Now, after waiting, there is nothing but the image placeholder.
    For the life of me, I cannot figure this out. It is this way on Firefox; Safari 4 shows an Quicktime sybmol with a question mark (both on my Mac), and on a PC with IE7 it doesn't show up at all.
    I've searched here and across the web and cannot find anyone else who has encountered this problem. Please help!
    an example page is www.newlifelaurel.cc/podcasts_20090920am.html
    Message was edited by: jacobfrank406

    Welcome to the Apple Discussions. Is the podcase link right below this graphic or is the graphic?
    Click to view full size
    If so make sure the graphic is not overlapping the QT file.
    OT

  • IDVD8 has audio errors after burn

    I am using iDVD8 to create slideshows with pictures and movie clips. The project runs correctly on the computer, but when the project is burned to DVD, long slide shows have an error. Somewhere between 13 and 14 minutes, the audio jumps so that it is out of synch with the project design.
    I have done all the software updates for iDVD. I have restarted the computer. Have readded the music from iTunes. I have burned a disk image. I have burned the DVD at 1x speed. I have even aggregated the iTunes playlist into a single song using GarageBand. The problem persists. I am beginning to suspect that iDVD does not like slideshows longer than about 13 minutes. Arggh!
    Yes, I could dump it all through iMovie, but then I lose the major plus of being able to flick between slides in the slideshow.
    I have scoured this list and the net but have found no answers on this one. Does anyone have any ideas?
    Looking forward to any feedback.
    Craig

    Take a look at this:
    http://docs.info.apple.com/article.html?artnum=302962

  • WCF Service hosted in Azure Cloud Service errors after published

    I have a project with several WCF services (mix of REST and SOAP).  The project has been running On-Prem for 6 months without an issue.  We are moving this to Azure but have run into an issue that will prevent us from going live.
    The project uses Autofac for it's IOC.  We are gonig to host this in a Cloud Service in Azure.  Everything appears to work correctly when running locally in the Azure Emulator however once we deploy using the Cloud Service project, everything builds
    and deploys correctly, but we receive the following error when trying to access a service.
    Server Error in '/' Application.
    Value cannot be null. Parameter name: key
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
    code. Exception Details: System.ArgumentNullException: Value cannot be null. Parameter name: key
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
    the exception stack trace below.
    Stack Trace:
    [ArgumentNullException: Value cannot be null.
    Parameter name: key]
       System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument) +48
       System.Collections.Generic.Dictionary`2.FindEntry(TKey key) +38
       System.Collections.Generic.Dictionary`2.TryGetValue(TKey key, TValue& value) +20
       System.ServiceModel.Dispatcher.WebHttpDispatchOperationSelector..ctor(ServiceEndpoint endpoint) +2459
       System.ServiceModel.Description.WebHttpBehavior.GetOperationSelector(ServiceEndpoint endpoint) +125
       System.ServiceModel.Description.WebHttpBehavior.ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher) +1955
       System.ServiceModel.Description.DispatcherBuilder.InitializeServiceHost(ServiceDescription description, ServiceHostBase serviceHost) +4245
       System.ServiceModel.ServiceHostBase.InitializeRuntime() +119
       System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout) +45
       System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) +553
       System.ServiceModel.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity) +350
       System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity) +1614
    [ServiceActivationException: The service '/Event/Calendar' cannot be activated due to an exception during compilation.  The exception message is: Value cannot be null.
    Parameter name: key.]
       System.Runtime.AsyncResult.End(IAsyncResult result) +925
       System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +528
       System.ServiceModel.Activation.AspNetRouteServiceHttpHandler.EndProcessRequest(IAsyncResult result) +107
       System.Web.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar) +151
    It appears that it's having an issue with the service configuration endpoint.  That is registered through Autofac WCF integration using the OOTB RouteTable here:
    RouteTable.Routes.Add(new ServiceRoute("Event/Calendar", new AutofacWebServiceHostFactory(), typeof(CalendarSvc)));
    All of this works fine in IIS and the local Azure emulator, but once deployed to the cloud service is where we get an issue.

    I don't know Autofac. What is it doing? If you use a normal WCF REST service, or ASP.NET Web API, do you see the same issue? If it does work, you may want to post a question on Autofac's forum:
    https://github.com/autofac/Autofac/issues.

  • Toolkit for CreateJS showing blank HTML pages after publish on only some Flash projects?

    When I used Toolkit for CreateJS on Flash CC for the first time on a simple test movie, it worked fine. I've now created a new movie of a scrolling portfolio banner to go on my homepage. After hitting publish, it only shows a blank HTML page, with a white box the size of the stage.
    I even tried it again when removing the buttons and tweens and still no joy. Is there a way I can upload both files to show you and to see if there's a difference in which why the newer one isn't working. Both have more than one layer. The test one moves out of the screen, while the new one fades out. I've even tried putting an alpha effect on the test to see if it doesn't play, but it still works fine.
    Please help.
    Thanks
    Adam

    Do you see any errors listed in the output panel?

  • Errors i am getting while rebulding my project

    i have imported one project from the zip file, and at the time of rebuilding the project, i am getting
    Error               
    Missing required library: 'C:Documents and Settings/vipul/.dtc/LocalDevelopment/DCs/sap.com/km/jars/_comp/gen/default/public/kmjars/lib/java/bc.rf.framework_api.jar'.     LocalDevelopmentemployeeseparationsap.com          Build path
    like that i am getting around 63 errors,
    what would be the possible cause of error, please explain
    Bala

    Hi,
    The same discussed in the following thread
    Export/Import Web Dynpro project
    and also
    http://help.sap.com/saphelp_nw04s/helpdata/en/55/34c83ecedc636be10000000a114084/frameset.htm
    still not solved then try
    right click on the component and check for the options repairs or change class path structure.
    PradeeP

  • No audio in accordion interaction after publishing as HTML5 in Captivate 7

    Hi guys,
    we have a problem with the accordion interaction in Captivate 7. After publishing it as an HTML5 project the audio (mp3) doesn't play on the accordion interaction slide. The interaction itself looks great and clean, and the audio plays fine in .swf and preview, but it doesn't play when published as HTML5.
    Any suggestions? Do you need more info? Let me know.
    Thanks so much again,
    Nat

    Add the file to your Captivate install directory Gallery > Interactions folder.  (Make a backup copy of the original file in case you need it later.)
    E.g. C:\Program Files\Adobe\Adobe Captivate 6 x64\Gallery\Interactions
    Make a note of the name of the interaction. Then open a new Captivate project and from the Insert menu, select Interactions.
    Find the interaction in the screen and insert it into the slide.
    Then configure the interaction, publish and test.

  • Error while previewing BI Publisher Report Output form Desktop

    Hi,
    i am getting below error while previewing Report Output form Desktop:
    javaw -Xmx256M -jar "C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib\RTF2PDFv2.jar" "C:\Users\mahlawat\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tb_param.xml"
    File not found.
    Please suggest
    Regards,
    Meetu

    Hi ,
    are u able to login into the bipublisher...check once..
    http://10.81.200.102:7777/xmlpserver
    generaly while connection to the desktop we will give the url at the bottom.
    the vpn is connected or not..
    Thanks,
    Ananth

  • My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    Hi there,
    Can you please share your Captivate version?(Help>About Adobe Captivate)
    Thanks,
    Nimmy Sukumaran.

  • Warning "RAM Preview needs 2 or more frames" after scrubbing audio in After Effects CC 2014 (13.0)

    The After Effects team are investigating a bug in After Effects CC 2104 (13.0) where a memory leak occurs while scrubbing audio (holding down the CTRL or Command key while scrubbing). This memory leak can eventually consume all free RAM, which can lead to the warning message "After Effects error: RAM Preview needs 2 or more frames to playback" when you try to initiate a RAM preview.
    While we investigate this problem, you can avoid the bug and memory leak by not scrubbing with audio. When the problem occurs you can resolve it by closing and restarting After Effects.
    http://blogs.adobe.com/aftereffects/2014/07/warning-ram-preview-needs-2-or-more-frames-aft er-scrubbing-audio-in-after-effects-cc-2014-13-0.html

    Hi all, just wanted to say, I am currently working on an award show for TV and have been scrubbing audio in AE CC 2014 13.0.2.3 without issue. Why am I not having the memory leak problem?
    Would like to help if I can.
    Hardware Overview:
      Model Name: Mac Pro
      Model Identifier: MacPro6,1
      Processor Name: 12-Core Intel Xeon E5
      Processor Speed: 2.7 GHz
      Number of Processors: 1
      Total Number of Cores: 12
      L2 Cache (per Core): 256 KB
      L3 Cache: 30 MB
      Memory: 64 GB
      Boot ROM Version: MP61.0116.B05
      SMC Version (system): 2.20f18
      Illumination Version: 1.4a6
    System Software Overview:
      System Version: OS X 10.9.4 (13E28)
      Kernel Version: Darwin 13.3.0
      Boot Volume: Macintosh HD
      Boot Mode: Normal
      Computer Name:
      User Name:
      Secure Virtual Memory: Enabled
      Time since boot: 1 day7:24

  • Error XLS000009 while Previewing dashboard

    HI All,
    While previewing the dashboard, we are facing error XLS000009, saying
    connection timeout.We are using SAP BO Dashboard 4.1 . Please find the below snapshot:
    The same is happening while publishing the dashboard in repository(BI Launchpad). On searching about the error, we got very little to know about it from the SAP
    document.It only suggests to try again but not the root cause of the problem.
    Is there any known specific cause of this error.Or we should just hide the error message under query properties?
    Thanks in advance.

    Hi Aarthi,
    There might be connection issue. so, Please check the universe connection. If there is no issue with the connection, Try this
    1) Develop a simple webi report on the same universe which you have used in dashboards with 2 dimensions and 1 measure and check whether can you be able to run the report or not.
    Please let me know the result.
    Thanks,
    Vinod.

  • Error while previewing the BIP report

    While previewing the report in BI Publishr desktop,i am getting the following error.
    JAVA EXECUTION FAILED.PLEASE CHECK THE JAVA OPTION IN OPTION DIALOG BOX.
    WINDOWS CANNOT FIND 'C:\DOCUMENTS AND SETTINGS\+USER+\LOCAL'.MAKE SURE YOU TYPED THE NAME CORRECTLY AND THN TRY AGAIN.TO SEARCH FOR A FILE,CLICKTHE START BUTTON, AND THEN CLICK SEARCH.
    I have JDK version 6 installed in my system.
    I have already checked for the java option in oracle bi publisher-->>options-->>java home.
    still i am getting the above error.
    Kindly help in resolving this issue.
    Thanks in advance.

    I have put this option but it is not resolving the issue.
    Now when i click on preview,it is giving error :
    Windows cannot find "C:/Documents and settings/asingh93/Local".Make sure you type name correctly ,and then try again"
    But i dont know from where it is searching for this local folder and why.
    Please Suggest.
    Thanks

Maybe you are looking for