Audio error message

Encore 1.51 gives an error message on burning a dvd of an NTSC project. It says :NTSC DVD requires at least one AC3 or PCM audio track for every tiltle set...
This suddenly appeared even though I had made no changes to the project and it had made perfectly good DVDs in the past.
More than that, the audio track is a proper PCM WAV file, so I do not know what is going on. Any ideas?
Cheers
David

Using EncoreDVD 1.51, I get the following error message when importing a PCM .wav file into the project as an Asset. These are WAV files exported from PremierePro paired with corresponding M2V video files.
"No audio decoder available for this stream type (DVD error -47002)"
I have reinstalled all software, reinstalled/replaced the sound card and drivers, etc. No change. This worked perfectly a week ago, and I haven't made any changes since then except reinstalling Premiere and my Matrox RT.X100 card.
Running WinXP SP2.
I haven't found any reference to this in the Knowledge Base.
Any ideas?

Similar Messages

Audio error message on playback and P Pro CS6 won't stop playback. Have to force quit.

Hello: I'm getting an audio error message on playback and P Pro CS6 won't stop playback. Have to force quit.
Earlier in the project, I would crash when moving audio up/down tracks or up/down time line.
Any thoughts?
Thanks,
Tolbert
Mac/12 core/32G ram

That screenshot will help us figure out what's going wrong, but I won't have any news until at least July 8 because our offices are shut down next week. In the meantime, two suggestions:
Download CC and see if this crash occurs in the new version.
Google cpp-99 premiere pro audio prefetch. I got several hits, but not dig into them to see if any had a solution or workaround.

"elastic audio" error message when bouncing

In the past I have had this error message pop up sometimes when mixing:
Logic Pro:
Unexpected request for audio data.
See console. (Elastic Audio)
(-10024)
Now with 9.1.6 I am experiencing it popping up in the middle of my bounces as well. It halts the bounce and sometimes I can hear a glitch at that point in the bounced file.
This error message seems to have been around for years, and I have just lived with it because it was a minor annoyance, but now it is a more serious issue.
Apple are you listening?

Merge regions into one long big one, that's what I always do. That way the fades get rendered too. (Since fade in and out are not usable on flex regions, 'you'll hear a little glitch at the beginning and end if you try a fade in or out on a flexed region)
Flex gets confused when there's more than one region one the same track it seems. (booh).

System Overload/Core Audio Error Message when recording/playback

Well ive been experience this problem for a while now but ive read up on it and done some troubleshooting and think i may have found a solution.
Well what happens is ill be recording say one track or 2 tracks in mono or stereo or playing back about 3 or 4 tracks and logic will stop everything and give me an error message which either says system overload or core audio overload or something. Well i figured i was overloading my cpu so what i tried doing was restarting my computer and then only operating logic as the only program. this worked temporarily sometimes but not in the long run. well i did research and came to this.
apparently its too overbearing for my Powerbook processor to record in 24 bit/96 Khz which is kind of a bummer because it was one of my attractions to my i/o box that i could do that. also freezing tracks will help greatly apparently which i have yet to try but hope will work too.
also i recently deleted about half of the stuff on my internal drive and put my 42.41 GB of music onto my external HD so now i have 54.6 GB on my internal HD which holds about 93 GB total. should this help me greatly? or will it only be a minute difference?
well any more solutions/suggestions as to what i can do to better my situation? also am i correct as to why i think i get those error messages.
ps: sorry for the uncapitalization, i got a bit lazy here
thanks
-Mike

Mike,
Bit depth is more important for recording quality than huge sample rates. If you're going to change your settings, I'd stick with 24 bit, but reduce sample rate to 48 kHz.
When you say you've put all your music on the external drive, what exactly do you mean--your Logic files or your mp3/AAC files? Normally you would want to use an external drive to record onto from Logic. That way your internal HD can run the OS and Logic, while the external is free for all the fast recording tasks. (This assumes your external HD is pretty fast, and ideally is firewire.)
Freezing works wonders, too, if you're processing tracks.
-Eric

Itunes audio error message on loading iTune

I keep getting the following error message when I open iTunes "iTunes has detected a problem with your audio configuration. Audio / video playback may not operate properly"
Sure enough audio playback is not working. I have reloaded iTunes 8 using the repair function but no change. Anyone any ideas

Hello all.
Below is some information that may assist
1. Go to Control Panel
2. Now go to Add/Remove Programs or Programs and Features if it is Vista
3. Uninstall anything called Quicktime made by Apple. If you happen to see Quick Time Alternative you will need to uninstall this as well.
*Even though it may not tell you. I advise a reboot once this is finished. Now proceed to the link below to download the Quicktime Standalone
http://www.apple.com/quicktime/download/
Make sure to download the Standalone version. Not the iTunes+Quicktime
Once this is done. Then attempt to launch iTunes. If you continue to get the same message try the following
-Full basic Uninstall of Apple Software
1. Go to Control Panel
2. Now go to Add/Remove Programs or Programs and Features if it is Vista
*Uninstall in the following order if possible as this will decrease amount of reboots needed
-Apple Mobile Device Support
-Apple Software Updates
-Bonjour
-Windows iPod Updaters
-Mobile Me Pref
-Quicktime
-iTunes
*Reboot and then download and install iTunes+Quicktime
http://www.apple.com/itunes/download/
If none of those first 2 phases work. Try the last option down below. A little more in depth but this is a full cleanup of all Apple files and folders and programs.
http://support.apple.com/kb/HT1926?viewlocale=en_US

Slide Show Audio Error Message

I am getting an error message, "The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed."
This is what the adobe support says about it, "The error occurs because the file contains copy protection, digital rights management, or another mechanism that prevents it from being used outside of designated applications or devices. To use this content in an Adobe product, you will need to obtain a copy of such content from the copyright holder or their licensee, who are able to provide the content without such copy protection."
Does anyone know how I go about getting that unprotected copy from the copyright holder to use in my slide show?

What type of file is it?
You really need mp3. If it’s a track you purchased from iTunes, try deleting album art before using the track.

Import Audio Error Message

When trying to import audio into a Captivate 2 project I
receive the following error:
"Unable to decode and import the selected wav/mp3 file"
I have seen other posting where this is a problem in Vista
but I am running Windows XP. I can listen to these clips in the
Windows Media Player. I have also verified that they are in the PCM
Format.
How can I get this fixed? I need to have these projects
posted by Monday morning!!!
Thanks for your help!

Hi kpete1
I know you said that you are certain that the file is already
in PCM format. But just for grins, you might try clicking Start
> Run... and typing sndrec32.exe into the Run dialog. Then press
Enter. The generic Windows Sound Recorder application should open.
Open the file giving you fits. Then click File > Save As... and
note what format is listed at the bottom of the Save As dialog next
to the Format: area. You may be surprised to see it's not PCM. Even
if it is PCM, click the Change... button. And this is all you need
to do! From there, just click the OK button to dismiss the Sound
Selection dialog. Then click the Save button to dismiss the Save As
dialog. You might wish to change the file name of the original .WAV
file in case you ever need it in the original format for anything.
Give that a go and let us know if it helps. Hopefully it
will.
Cheers... Rick

No Audio Playback due to Error Message "Disk is too slow. (Prepare) (-10001)"

Out of the blue, no audio playback. Was working just fine earlier today.
I repeatedly get the error message:
Disk is too slow. (Prepare)
(-10001)
NOTE: I have more than enough disc space. That is NOT the issue.
I also just got a second error message:
Part of the Project was not played
This project has too many real instrument tracks to be played in real-time. To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
NOTE: Odd as I have only 2 tracks in the GarageBand file.
Any others experience this? Suggestions?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
By the way I got an Satellite M70 - 168 laptop.

Hi
Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
Found this useful knowledge base article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
But dont worry buddy. The Google search engine is the key!
Try to search for this KB835221 patch and Im sure you will find the right one!
The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
Good luck!
Message was edited by: Jayjay

Error message trying to synchronise audio and midi sample rate 42463

I have a Rode Podcaster mic that is terrific. It has been working fine in GB. suddenly I am getting this when I try to record my podcast:
'Error message trying to synchronise audio and midi sample rate 42463 recognised. Check conflict between Garageband and external device'
Has anyone experienced this before? How do I resolve it? I'm still using my Version 6.0.5.
Apple, is this a way of forcing me to upgrade to V10?

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

Error message when trying to export audio file to DVD

I recorded an interview on a portable voice recorder and transferred the data into Garage Band by connection of a cable connected to the headphone of the device to the speaker input in the Mac. Garage Band took the audio file. It is 1.5 GB. I did some minor editing and wanted to save the file onto a DVD. When I selected "share" to export song to the DVD, an error message came up stating that the file was over 2 GB, which it wasn't. The file was then broken in two and one part was "shared", but the same error message came up. I took the computer to the Apple store for the Genus to help me with, but he had the same problem. The only way that he was able to save the audio file to a DVD was to select the file and place the file on a blank DVD. However, it can only be listened on a computer with Garage Band. I intend to use my voice recorder again to interview people. How can I input the audio file in the Mac and have it saved on a DVD to be played on multiple devices?

Hi ,
Could you please elaborate more about the issue ?What exactly are you trying to perform and how are you trying to do the same?
Are you using Adobe Reader or Adobe Acrobat to export PDF to excel?
What software version are you using?
Also ,could you please tell what is that error message and it would be wonderful if you could share the screenshot of the error message with us so that we can assist you accordingly .
I would also like to know what OS do you work on ?
Is it happening with all kinds of PDF you are trying to convert or any specific one?
Please update me with above mentioned details so that we can assist you further .
Regards
Sukrit Dhingra

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Error message when burning audio CD from iTunes

I tried to burn an audio CD and got the following error message: "The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media." Can anyone help?

I tried the patch because I thought if the drive was the same as the ones in dell that it would work, but unfortunately it didn't lol. I've tried 3 different brands of cd-r, no luck. I can burn a cd-rw which is a bonus I suppose.
I called my support helpline again, and was given the story that the problem is the itunes software and they are not prepared to help. They even said that the patch that dell released doesn't fix the problem even though I gave him the address to the forum saying that it did. Someone must be responsible for the problem, meantime I'm stuck in the middle, and it seems it is the tsst corp L632H CDDVD drive that is giving problems.

Audio error message

Similar Messages

Maybe you are looking for