Audio Export Error - iMovie 09

Hey guys,
I have a race montage with numerous HD clips. I set all of the clips to "0% Audio Levels" and imported a song from my iTunes library instead. When viewed in iMovie, the video is great! But when I export it and view it, some of the clips I used aren't muted, thus creating "slowmo voices" and random sounds coming from my source files. I double-checked everything and I did MUTE all audio for that track, yet when rendered, it shows up along with the music?
I tried to remove the music and just render everything as a plain video file so I could add audio in a separate project, but the same issue happens. Some of my clips wont mute! HELP before I throw my new iMac i7 out the window!
-Cliff

Check to see if you are using any custom fast motion or slow motion settings. As long as you stick to the pre-sets on the tic marks (like 25%, 50%, 200%, etc.), the sound is OK. When you go for a custom setting like 58% or 137%, it seems to mess up the sound.

Similar Messages

  • No audio export in iMovie'11 9.0.4?

    I've seen this a number of times in the discussion forum but no solution that works for newbies.
    Simple slideshow (from iPhoto) with music (from iTune library) plays fine in iMovie but doesn't come over on the exported versions.
    Have tried a number of times in the various file types.
    Is this a bug or do I have some error in my settings?
    (My first Project used one of the built in "Themes"...it worked fine.)

    thirais wrote:
    …  Files were created by soncy camcorder.
    no Sony camcorder records in mp2.
    years ago, there were DVDcorders ... encoding in mp2,, but wrapped into .vob - this can not be fixed with Perian
    ... sorry for being so ... stubborn, but my assumption is, your wrong diagnosis 'mp2' leads to an unnecessary, obsolete and painstaking long workflow. again, no camcorder on the market records in mp2 (as long as I stand corrected! )
    so, what Sony model, please?
    I guess, there's a much more conveniant way importing your videos  ...

  • Disk Space Exporting Error - iMove '09

    Hello all.  I am using iMovie '09 - and when I export my hour long movie I get an error after about 1 minute of exporting that says
    "The operation could not be completed because there is not enough space on the destination disk." 
    However, my destination disk (i.e. my external hard drive) has over 700 gigs of space available. Does anyone know what's going on?  If it helps, my system is a 10.5.8 desktop, and I imported the video directly from a Sony HD camera into iMovie.

    Hi
    Yes - As I guess - the amount of free space ON YOUR Start-Up Hard disk is far from 700Gb free space.
    Most probably far from 25Gb free space - and even
    Far from 5Gb free space
    Less than 1Gb  may be ?
    As Mac today is UNIX - it behaves like it = Meaning that Applications and OS - needs lot's of lot's of space for their temp. files so my minimum of 25Gb for interlaced SD-Video is no over estimation and if HD then multiply with 4 to 5 times more to be on the safe side.
    BUT - External Hard Disk - Yes it's important that there is enough space there too - But the temp. files can not be addressed here - so the free space to run OK - MUST BE on the Start-Up (Mac OS) Hard Disk - no secure way around this.
    Yours Bengt W

  • QuickTime Pro audio exporting error - help please!

    So I've got Perian installed to read 1080p HD movies and I opened up .mkv files in QuickTime Pro and allowed it to read the files into memory (let the grey bar go for a few minutes).  Once that was done, I wanted to export the DTS 5.1 surround sound audio track to .AIF format and do a pass through encoding of the video only.  After this, I use MAX to convert the .AIF file into an AC3 file which I add back into the video only to create the final .mp4 file with 5.1 sound.  I've done this successfully before and I prefer this method to downconverting the 5.1 audio into stereo sound when converting the .mkv to .mp4.  This time however, QuickTime Pro miserably failed.  I have Avatar in 1080p and The Lord of the Rings trilogy in 1080p as well and I wanted to convert them to .mp4 the same way I've done before.  All of them failed with the same error.  When I tried to export the audio, I believe it said, "qtKiterrorcatchall (-1309)" and it failed.  It said this for all of the videos and strangely enough, it worked great with another .mkv movie I had perfectly with audio and video tracks in the same formats.  Does anyone know how I can fix this and export the audio track so I can preserve the surround sound and put it back into the .mp4 video file? Many thanks...

    I'm having the same problem. Were you able to get an response or and answer to this problem? Thanks

  • WMV Audio export error

    im exporting a wmv, and "Inconsistent Audio Sample Rate" error box come up..which thens saids "The media you are exporting contains audio with mulipe sample rates."
    I have flip for mac studio pro and running fcp 5.1
    Whats the setting that i need to have to be able to, or what flip for mac lincese do i need?

    look in your timeline and make sure all of the audio sample rates match, as the message you got says they do not. If you need, you can export just the audio for each clip to a new file with the proper sampling rate, and then place them in the timeline in place of the original. Then export that sequence.

  • I keep getting "low-level exception occurred in: waveform audio (exporter)"

    when I try to edit a clip from preimere pro cs6 with the context menu "edit clip in audition" it gives me the low-level exception occurred in: waveform audio (exporter) error in the log and does nothing.
    what is happening and how do I fix it?

    Often, when two programs in a suite are being used with one another, which forum to post to, can be a bit of a gray area. Those, who suggested the Au Forum, probably fixated on that part of the workflow.
    Had you posted here, there might well have been a few, who would have suggested the Au Forum.
    As the Au folk have not encountered this error, the PrPro Forum is probably the best place to be right now.
    Unfortunately, I have neither encountered that error, nor have I read of it, so I am of no use, other than to say that someone here will probably be able to get you some help.
    Now, I do agree that at the point in your workflow, where you are encountering the error, it probably IS a PrPro error.
    Good luck,
    Hunt

  • This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

    This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission"  it even does it when I am just trying to export to my external hard drive to save the file

    I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission"  it even does it when I am just trying to export to my external hard drive to save the file

    Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup.  Stopped, disconnected and the project exported!

  • Error when exporting my imovie project

    Hi there,
    Everytime I try to export my iMovie project I get the following error:
    “Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)”
    As proposed in other discussions I have optimized every single clip. However the error is still popping up. Would be much appreciated if anyone could help me.
    Many thanks in advance.
    Jodok
    Can someone please help.
    Many Thanks

    OK I suggest that you right-click on your Event and see if iMovie offers to optimize your clips. This will convert them to Apple Intermediate Codec. It will place the originals in a folder called Movies/iMovie Original Movies, so you will still have a copy of the originals.
    You export should go smoothly after optimizing.
    If you do not optimize, then iMovie has to optimize on the fly, during the SHARE. This places a huge load on your computer. It is better to go ahead and optimize separately.
    H.264 uses Group of Pictures compression. In this compression scheme, there is one full frame for every (say) 24 frames of video. The remaining frames are partial frames that contain info like what has changed since the previous frame, direction of motion, etc.  Obviously, this is not good for editing, because if you edit out the full frame, the remaining frames are useless. So before editing or sharing, all these partial frames have to be resolved into full frames.
    Apple Intermediate Codec is a full frame codec. Each frame has some compression, like the full frames in h.264, but all frames are full and they are independent of each other. You can cut wherever you like, and you can apply slow motion without worrying about where you start.
    In Final Cut Pro X, you would use ProRes 422, another full frame codec.
    You should expect Apple Intermediate Codec to be about 10X larger than the equivalent h.264 clip.

  • Exporting from imovie has no audio

    I am trying to export my imovie to different formats and each time I cannot hear any audio on the exported file, What gives?
    I have tagged both audio channels in the timeline.
    I have checked the EDIT VOLUME button also.
    Nothing works.
    Is the problem with imovie or quicktime player?
    I'm using imovie version 3.03
    I'm using quicktime player version 7.0.4
    Mac G4, Dual 450's   Mac OS X (10.3.9)  

    Phanto:
    I think you are trying to import the wrong type of clips...
    As I said before--iMovie does not work with muxed MPEG-1 and MPEG-2 clips
    http://docs.info.apple.com/article.html?artnum=42996
    How can I edit MPEG or convert DVD or MPEG to DV
    http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
    Using MPEG or DVD footage
    http://www.danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    MPEG Streamclip
    http://www.alfanet.it/squared5/mpegstreamclip.html
    MPEG-2 Playback
    http://www.apple.com/quicktime/mpeg2/
    Sue

  • How do I export from IMovie when "not enough room in Heap Zone" error code appears?   How can I correct,  what to Do.."export movie" insteand of Media browser or IDVD?  Finalize movie?  I want to burn it to DVD!

    How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted. 
    I shortened the movie, that is no cure...Correcting date info on clips does not pertain.  Why would Apple throw roadblocks in your way without solving problems they create?
    A techie made an appointment on the phone and was totally incapable of addressing the problem.
    What is a heap zone????

    Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
    If that fails try Share Menu > Export using QuickTime...
    Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
    Under the Video section click on Settings...
    Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

  • How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts?

    How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts? Additionally, what does 'File' 'Finalize Project' do?

    Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
    If that fails try Share Menu > Export using QuickTime...
    Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
    Under the Video section click on Settings...
    Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

  • When trying to export an iMovie project I get the following error message (-108).

    When trying to export an iMovie project I get the following error message (-108)

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • When exporting from Imovie I get the following error? OSStatus error -2009

    when exporting from Imovie I get the following error? OSStatus error -2009

    Hi
    Apple Support pages says.
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    Yours Bengt W

  • -34 error when exporting from iMovie to QuickTime

    When attempting to export an edited movie using the iMovie app on my MacBook Pro into QuickTime, I receive the message "quick time export error -34"
    Can anyone tell me what to do?  THANK YOU!

    I tried that and it makes a file without
    video...sound only.
    Itsounds like you didn't have the Sound box checked.

Maybe you are looking for

  • RE : Creation of subcontrating PO - Components details

    Hi Experts, I am doing a subcontracting purchase order using BAPI - (Bapi_po_create1). But iam not able to update for the sub components of the materials. So, I opted for the PO creation first using Bapi_po_create1 and then using the FM Bapi_po_chang

  • Mail does not display in viewing window. Please help

    Hi, I have been told to come and post this here.... I think I put it on the wrong board. I am receiving my mail into inbox but it will not show on the screen. I have a pop account for myself and a secondary account for my partner. His mail is showing

  • Changing Path file with iterations over loop

     Hi there -- I need some help with changing a file name with every iteration of a for loop, eg; Iteration 1, file path = iteration1.lvm Iteration 2, file path = iteration2.lvm etc etc... I've attached a picture of the loop and the file name, along wi

  • Info about CIDX adapter with a scenario

    Hi all, Can any one help me out by giving ino about *CIDX* adapter: Where its used and how its used with an example scenario In a nutshell complete info about CIDX I would be very gartefull Thanx in advance

  • After downloading from the camera can I delete from the camera?

    I'm using Bridge CS3 to download images from my Canon XTi Digital Rebel. After download I would like to delete the image from the camera's storage disk. I would like NOT to have to run the Canon's EOS utility to do this and would prefer doing it from