Audio Export Failed

I'm working in FCPX 10.1.1. I'm exporting from a timeline that is 1hr, 3 mins in length. I'm doing a range selection of just 10 minutes and then exporting that range selection to Audio only in AIF format. I get an error message that "Share Failed". But Final Cut actually did export an AIF file to the designated folder however it exported a file that is 4hrs, 8 mins in length. Its exported the entire timeline plust 3 some hours of silence. And yes, I double checked my timeline, there are no stray elements past the 1 hr, 3 min. mark. Not to mention it didn't export my range selection. Anyone else having this problem??
I then setup of a Compressor destination for AIF and tried exporting via that preset and it yeilded the same results, an AIF file that was 4hrs, 8 mins. in lenght.

To add insult to injury, I've run into yet another FCPX glitch. I have two laptops, both running OS 10.9.2, and both are running FCPX 10.1.1. I decided to disconnect my external drive and try this audio export on my other laptop. However, when I launch FCPX, it doesn't even recognize that the drive has any FCPX Events or Project files on it. How can that be??? How do I get FCPX to recognize the Events and Projects?? This is really confusiing since they were created on another laptop with identical OS and software versions.

Similar Messages

OMF export failed due to internal error

I get this error message whatever I do when I try to export as OMF:
"OMF export failed due to internal error"
I tried OMF 1 and 2.
I tried to uncheck "include audio".
I tried an extremely small project (one region, one track).
Always the same error. Problem is there's absolutely no information on what kind of internal error this is.
All other export options (AFF, Open TL and Final Cut) works.
Any ideas?

I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge

Exporting fails in fcpx 10.1 and Compressor 4.1

Ok I have a bunch of projects that I brought into Compressor using "Send to Compressor" command in fcpx. Using the m2v/ac3 preset for DVD in Compressor on a batch, audio exported fine, video failed.
I tried just doing a DVD as well as the compressor preset for m2v/ac3 in FCPX share menu both options failed. When I click details it says "com.apple.Compressor.CompressorKit.ErrorDomain error -1" I tried deleting preference files and re-installing the apps still have the same error.
All of this worked prior to going to 10.1

Perhaps you might try asking about this over at the Compressor 4 thread: https://discussions.apple.com/community/professional_applications/compressor_4/.
Good Luck...

Final cut pro : Export failed - File too large

Hello
I'm trying to export a project in FCP 10.0.5.
It seems to work but when it reaches 45% the export stops and here's the message :
Export failed : file too large ...
Can anyone help me please?
Thank you,
Fred

The file size is about right but your sampling rate is wrong.
44.1 kHz is CD Audio standard. Digital video uses 48 kHz -you can use QuickTime Player to resample:
File > Export > Sound to AIFF. Click Options and then *Audio Settings* to change the sampling rate.

CS4, Audio Export problem due to CFA files

Hi,
I'm having a -really- annoying problem and would appreciate any help.
I have been unable to export a project through Premiere with Media Encoder (just keeps freezing, then restarting the export etc) so I've used Dynamic Link to import the Sequence into AE and export that way. I have done this numerous times for otherprojects without problem, and can even export other Sequences from the same Project with no issue.
However, when I try to import any Sequence that includes my intended project (a 54 minute film) I get the same error every time "Audio conforming failed for the following file: CTC3 NEW COMPLETE MOVIE 48000.cfa. Perhaps due to disk space."
I have plenty of free space and I can't locate this CFA file anywhere. This error prevents me from exporting any audio and the warning re-appears for every second that gets Rendered if I try to export. I exported a short clip and had to click away the error each time and the resulting video had no sound but did feature video.
I can't figure out why each Sequence that doesn't feature the clips I actually need can work fine, but any Sequence that -does- feature them will not import properly.
I'm supposed to have this film ready for a premiere tomorrow and have been trying since Tuesday night to find a way around this problem.
Thanks,

The Media Cache
Mylenium

Exporting fails in compressor 4.1 and fcpx 10.1

Ok I have a bunch of projects that I brought into Compressor using "Send to Compressor" command in fcpx. Using the m2v/ac3 preset for DVD in Compressor on a batch, audio exported fine, video failed.
I tried just doing a DVD as well as the compressor preset for m2v/ac3 in FCPX share menu both options failed. When I click details it says "com.apple.Compressor.CompressorKit.ErrorDomain error -1" I tried deleting preference files and re-installing the apps still have the same error.
All of this worked prior to going to 10.1

Not sure what to suggest except that I agree it's a communication problem between the two apps. And judging by the fact that you got one of the libraries to work, I would say the problem is on the FCP end of things.
In my case, I've run into some flaky behavior – but nothing so far that I couldn't resolve by trashing preferences and/or running Compressor Repair. (CR comes up with an incompatible version warning, but then seems to do useful things.) And I brought some of that flakiness on myself by experimenting with past versions and moving the app around. FCP, itself, has been remarkably predictable…and fast. And I also have some of the FCS installed, and as in previous versions, they all seem to coexist OK.
Do you still have your events and projects so that perhaps you could hide some and limit the libraries' size?
Russ

Final Cut Pro X Export Fails

There's this project. When I open it it looks like below. I have to double click on the thin line to see the timeline. Anyone know if this is normal and how to fix?
But there's a bigger issue. See pic nr 2. The timeline is shaded (diagonal stripes). What does this indicate? Exports fail. When I export it only saves the first frame of the movie in a .mov file. The export process dialog finishes immediately (less than a second). There are no errors reported, and nothing in console.log.
Previewing in fcpx itself works fine. Other projects export OK.
Anyone know what the cause might be?
Thx,
Wesley

Wesley,
It looks to me like you have a compound clip (first picture) in your timeline that has been edited down to 1 frame. when you double click the clip it opens up the compound editor and you see video, audio, transitions, and connected storylines with gray horizontal lines "graying them out" (second picture). Do what Tom has suggested and then place your selection tool over either end of the clip to drag out the edit point to reveal all the hidden content of the compound clip. Once you have done this you can double click the clip again and will see all the content in the compound editor will no longer be "grayed out".
I hope this helps!

MPEG2 Export failed

Hi all,
i´m running in problems generating MPEG2 (m2v) with compressor.
That´s what i´m usually doing (worked 100 times before, last time 28.03.2008):
I´m rendering out a video MJPEG A PAL from AfterEffects.
Then I´m using a Compressor Droplet to generate a approval Version for my clients (QT Sor3 halfres) and a MPEG2 file as final delivery.
But now the MPEG2 Export fails. Find the error report at the end of this thread.
I tried it with the last files when it worked, also failed.
I tried another MPEG2 Preset (the apple ones) -> failed.
Playing MPEG2 Files using QT-Player and VLC works fine.
Any help highly appreciated.
Thanks
Chris
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<services>
<service address="tcp://127.0.0.1:49162" type="servicecontroller:com.apple.stomp.transcoder" hostName="3HE-MacBook.local" displayName="3HE MacBook">
<logs tmt="04/23/2008 14:05:57.342" pnm="CompressorTranscoder" tms="230645157.342">
<mrk tms="230646300.128" tmt="04/23/2008 14:25:00.128" pid="155" kind="begin" what="service-request" req-id="4AB48258-EEF1-41FB-84CC-16A50166A135:1" msg="Preflighting."></mrk>
<mrk tms="230646300.143" tmt="04/23/2008 14:25:00.143" pid="155" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
<log tms="230646300.143" tmt="04/23/2008 14:25:00.143" pid="155" msg="Cluster storage URL = null"/>
<log tms="230646300.143" tmt="04/23/2008 14:25:00.143" pid="155" msg="Not subscribing, null cluster storage."/>
<mrk tms="230646300.143" tmt="04/23/2008 14:25:00.143" pid="155" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
<mrk tms="230646300.143" tmt="04/23/2008 14:25:00.143" pid="155" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<log tms="230646300.143" tmt="04/23/2008 14:25:00.143" pid="155" msg="Source file /Users/Chris/Desktop/JUST/3 instore TV/render/from AE/TitleSave/080423TV_52Showtime.mov is directly accessible."/>
<log tms="230646300.144" tmt="04/23/2008 14:25:00.144" pid="155" msg="Source file can be opened."/>
<log tms="230646300.144" tmt="04/23/2008 14:25:00.144" pid="155" msg="Source file can be read."/>
<mrk tms="230646300.144" tmt="04/23/2008 14:25:00.144" pid="155" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<mrk tms="230646300.159" tmt="04/23/2008 14:25:00.159" pid="155" kind="end" what="service-request" req-id="4AB48258-EEF1-41FB-84CC-16A50166A135:1" msg="Preflighting service request end."></mrk>
<mrk tms="230646300.319" tmt="04/23/2008 14:25:00.319" pid="155" kind="begin" what="service-request" req-id="4AB48258-EEF1-41FB-84CC-16A50166A135:3" msg="Preprocessing."></mrk>
<mrk tms="230646300.320" tmt="04/23/2008 14:25:00.320" pid="155" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
<log tms="230646300.320" tmt="04/23/2008 14:25:00.320" pid="155" msg="Cluster storage URL = null"/>
<log tms="230646300.320" tmt="04/23/2008 14:25:00.320" pid="155" msg="Not subscribing, null cluster storage."/>
<mrk tms="230646300.320" tmt="04/23/2008 14:25:00.320" pid="155" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
<mrk tms="230646300.321" tmt="04/23/2008 14:25:00.321" pid="155" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<log tms="230646300.321" tmt="04/23/2008 14:25:00.321" pid="155" msg="Source file /Users/Chris/Desktop/JUST/3 instore TV/render/from AE/TitleSave/080423TV_52Showtime.mov is directly accessible."/>
<log tms="230646300.321" tmt="04/23/2008 14:25:00.321" pid="155" msg="Source file can be opened."/>
<log tms="230646300.321" tmt="04/23/2008 14:25:00.321" pid="155" msg="Source file can be read."/>
<mrk tms="230646300.321" tmt="04/23/2008 14:25:00.321" pid="155" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<log tms="230646300.326" tmt="04/23/2008 14:25:00.326" pid="155" msg="preProcess for job target: file://localhost/Users/Chris/Desktop/JUST/3%20instore%20TV/render/OUT/TitleSafe /080423TV_52Showtime-MPEG2.m2v"/>
<log tms="230646300.334" tmt="04/23/2008 14:25:00.334" pid="155" msg="done preProcess for job target: file://localhost/Users/Chris/Desktop/JUST/3%20instore%20TV/render/OUT/TitleSafe /080423TV_52Showtime-MPEG2.m2v"/>
<mrk tms="230646300.335" tmt="04/23/2008 14:25:00.335" pid="155" kind="end" what="service-request" req-id="4AB48258-EEF1-41FB-84CC-16A50166A135:3" msg="Preprocessing service request end."></mrk>
<mrk tms="230646300.474" tmt="04/23/2008 14:25:00.474" pid="155" kind="begin" what="service-request" req-id="687F639C-3D0A-4B7B-9DCC-1B458497A4FE:1" msg="Processing."></mrk>
<mrk tms="230646300.475" tmt="04/23/2008 14:25:00.475" pid="155" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
<log tms="230646300.475" tmt="04/23/2008 14:25:00.475" pid="155" msg="Cluster storage URL = null"/>
<log tms="230646300.475" tmt="04/23/2008 14:25:00.475" pid="155" msg="Not subscribing, null cluster storage."/>
<mrk tms="230646300.476" tmt="04/23/2008 14:25:00.476" pid="155" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
<mrk tms="230646300.476" tmt="04/23/2008 14:25:00.476" pid="155" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<log tms="230646300.476" tmt="04/23/2008 14:25:00.476" pid="155" msg="Source file /Users/Chris/Desktop/JUST/3 instore TV/render/from AE/TitleSave/080423TV_52Showtime.mov is directly accessible."/>
<log tms="230646300.476" tmt="04/23/2008 14:25:00.476" pid="155" msg="Source file can be opened."/>
<log tms="230646300.476" tmt="04/23/2008 14:25:00.476" pid="155" msg="Source file can be read."/>
<mrk tms="230646300.476" tmt="04/23/2008 14:25:00.476" pid="155" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
<log tms="230646300.485" tmt="04/23/2008 14:25:00.485" pid="155" msg="starting _processRequest for job target: file://localhost/Users/Chris/Desktop/JUST/3%20instore%20TV/render/OUT/TitleSafe /080423TV_52Showtime-MPEG2.m2v"/>
<log tms="230646300.491" tmt="04/23/2008 14:25:00.491" pid="155" msg="MPEG-2 Transcode, rendering in YUV 8 bit 422"/>
<log tms="230646300.502" tmt="04/23/2008 14:25:00.502" pid="155" msg="MPEG-2 Encoder Settings (v604)
Stream Type: MPEG-2 Video Elementary
Frame Dimensions: 720x576
Frame Rate: 25.000000 progressive
Aspect Ratio: 16:9
Video Format: PAL / Rec. ITU-R BT.470
GOP Pattern: 12/3 closed IBB
Rate Control: 2-pass VBR 5000000 bps target, 7500000 bps max
Motion Estimation: l2orig+l0mbloopsmoothing
Search Range: 16x16
RD Optimization: fast+dctmode
Flags: 0x1
Visual Masking: on
Intra DC Precision: 8-bit
Quant Scale Mode: auto
Intra VLC Mode: auto
Coef Scan Mode: auto
Quant Matrix: 1
Segment Type: last"/>
<log tms="230646304.977" tmt="04/23/2008 14:25:04.977" pid="155" msg="Total retries = 24 ( 16.67%)"/>
<log tms="230646306.993" tmt="04/23/2008 14:25:06.993" pid="155" msg="Done _processRequest for job target: file://localhost/Users/Chris/Desktop/JUST/3%20instore%20TV/render/OUT/TitleSafe /080423TV_52Showtime-MPEG2.m2v"/>
<mrk tms="230646306.994" tmt="04/23/2008 14:25:06.994" pid="155" kind="end" what="service-request" req-id="687F639C-3D0A-4B7B-9DCC-1B458497A4FE:1" msg="Processing service request error: QuickTime Fehler: 0"></mrk>
</logs>
</service>
</services>

The source frame rate is 23.976, so I guess I would go with 24p. My intention is to upload the file to a streaming video website. They have their specs laid out for me, I just happen to be new to all of this so I am having a tough time meeting them.
My question right now is, if i have selected the MXF OP1a XDCAM option with XDCAM 50 NTSC (4:2:2) video codec, will the export be in mpeg2 and what will my bit rate be? I have no way of viewing the bit rate with this configuration.
Here is a screen grab of their required specs:

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

Apple's Audio Units Fail Validation in Yosemite

Why do Apple's audio units fail validation in Yosemite
Anyone else having this problem ?
What's the fix ?
Even Logic Pro X 10.0.7 can't validate Apple's AU plugs.
[Rant: i have never been so disappointed with a Mac OS as i am with YO. Most of my midi/audio/video programs will not work because of the validation of AU/VST plugs. I am this close to trashing Yosemite . It reminds me of my OS 9 days: if you even looked in the wrong direction the system stop working.]

are there any AU plugs here, in the components folder...?

Export Failed (To Excel)

I searched a few threads showing the same problem... only without any confirmed solution. Exporting a workbook to excel comes up with 'export failed' while all the other exports work fine.
I've increased virtual memory on the computer.... and still Discoverer cannot export to excel. I also tried exporting on a server with over 7 gigs of memory. I am guessing the problem the process of formatting data to excel format.
Any other suggestions ??
Thanks.
Edited by: user10147500 on Jun 3, 2010 11:25 AM
Edited by: user10147500 on Jun 3, 2010 11:28 AM
Edited by: user10147500 on Jun 3, 2010 11:29 AM

Hi
Are you by chance using Windows XP with Service Pack 2 installed. Microsoft, as always, does not quite tell you everything that they changed. The big one this time is that Service Pack 2 sets a registry switch that by default prevents Internet Explorer from transferring applications between zones. To Microsoft, running something from a web server (Discoverer) and then running something on your PC (Excel) means running applications in two different zones. With that switch set, your PC cannot switch zones when running Internet Explorer and so cannot open Excel from within Discoverer Plus or Viewer.
To allow Discoverer Plus to call a local copy of Excel you need to reset the switch so that it one again allows zone switching, like the old XP. The switch should be set to 0.
Follow this workflow:
1. Open your registry and look for this setting:
[HKEY_LOCAL_MACHINE]/Software/Microsoft/Internet Explorer/Main/FeatureControl/FEATURE_ZONE_ELEVATION/iexplore
It is probably set to 1 and it should be set to 0
In the Windows environment:
1. Start | Run | Regedit (to open the registry)
2. Locate the following key path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION\iexplore.exe
3. Change the value of this setting from 1 to 0 then close the registry editor
4. Ensure that the following settings for the .xls & .html file types are unchecked:
a) Open Windows Explorer
b) Goto Tools | Folder Options | File Types tab
c) Select the Extension XLS (or HTML) then click on the Advanced button
d) At the botton of the screen are three settings that use checkboxes. If either of the following two are checked, un-check them:
'Confirm Open after Download' and 'Browse in same window'
5. Select the OK button
6. Click the Apply button
7. Re-boot the PC
Let me know if this helps
Best wishes
Michael

WebLogic Portal 10.3.2 EmbededLDAP Export Failed

New domain created in WebLogic Portal 10.3.2. 11g
In the Admin Servers log file, I see this error:
<Mar 1, 2010 7:06:23 PM CST> <Error> <EmbeddedLDAP> <BEA-000000> <Database Export Failed: null>
I don't see this in other domains, just this newly created one.

You may want to go to the domain (top of tree) in the admin console, then 'security', 'embedded LDAP' and play with the 2 options of "refresh replica at startup'" and "master first". I don't have enough info on what database is referring to or your configuration but these are areas you may want to look into.

Quicktime export failed - out of memory

After I managed to open AVCHD (MTS) movies with AE CS4 I just tried to export a 2 min movie. I export as H264 1280x720.
I keep getting this error "quicktime export failed - out of memory"
It also happend when using SD movies
I have 2GB ram and a dual core inter E6550.
Does anyone encountered such problem ?

Are you rendering and exporting using the render queue, or are you using the Export command in the File menu? You should almost always use the render queue.
See
"Rendering and exporting movies using QuickTime components" and
"About rendering and exporting".

AUTOMATED EXPORT FAILED

Hi Azure team,I received the below error mail for automated export.
"We recommend checking that the storage account is available, and that you can perform a manual export to that account. We will attempt to export again at the next scheduled time."1. May i know, What is this message conveying?2. Storage is not accessible during that time?
If yes is answer for 2nd question then please let me know why it was happened?and how could we overcome from this???Kindly help on this by providing suggestions.

Hello,
Did the automated export works on the SQL Database? you can review the Import and export history in the SQL Database server.
The message showed in the mail indicates that automated export failed due to some reason. If your storage account is not accessible, the export may fail as the .bacpac file cannot be stored in the storage.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Audio Export Failed

Similar Messages

Maybe you are looking for