Audio Fade In Fade Out -1 Sec?

Captivate v5.5
I have created a v5.5 Captivate project, imported the audio to each slide after creating the audio with Audacity and am now starting to sync the audio with the animations.
I have just noticed that every slide in my project has the following audio setting;
I dont recall making this audio setting.
1. Where is the Fade In Fade Out option setting to ensure this does not get applied again to future projects?
2. I cannt see how to remove the 1 second Fade In / Fade Out for the whole project.
Do I have to edit this slide by slide?
Thanks,
Noel

Thank you Lilybiri for taking the time to open your "old" v5.5 - I really appreciate it.
If I had not taken that screenshot I might have started to doubt myself.
On receipt of your reply I went back to the project with the issue, and would you believe it, all the slides have reverted back to 0sec Fade In and 0sec Fade Out!
I have not made any changes and now have no idea why this happened in first place or what happened to make them revert to correct 0sec settings - but will keep an eye on it and hope that it was a one off Monday morning "glitch".
Noel

Similar Messages

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR

When adjusting the audio volume in a selected region, why does it give me a curved line instead of straight and why cant I change it like i can with a fade in our out?

When adjusting the audio volume in a selected region, why does it give me a curved line as a transition instead of straight, and why cant I change the fade shape like i can with a fade in our out? When I slide thet volume all the way down it makes a very abrupt down curve. It's audibly noticdible.
Thank you.

Use the range selection tool and select the portion of the clip you want to change the volume on. Drag the volume line down and FCP will create keyframes which you can adjust as you want to get a fade shape.

Audio fade with fade in fade out effect

i want to make the audio fade along with the end of a clip when i use the fade in fade out transition i tried the audio cross fade but no luck could someone please help me out

Let me add to Tom and Al suggestion: if you want cross fade (not only fade in and out) your clips must have handles. In other words you should set up an Out point (in the left clip) and an In point (in the right clip): these must leave enough media in each clip to let cross fade to work; that's needed for either video or audio.
Piero

Audio distorted during fade in/fade out transitions

I'm using iMovie HD to edit an MP4 file. I've put fade in/fade out transitions at the beginning and end of the movie, but I notice that it either garbles the audio during these transitions or adds a loud clicking noise in place of the audio that should be there (i.e., the original audio fading in or out.)
Has anyone experienced this? Any idea how to work around the problem?
Thanks.

Maybe it is this?
http://docs.info.apple.com/article.html?artnum=107945
Sue

FCP to soundtrack : clips audio fade in and out are lost !

Hi,
I sent a FCP project to soundtrack pro, but all fade in and out are lost. Only crossovers between 2 clips remain. Is it a limitation of the "send to multitrack project" function ?
Thanks

Same problem here. Tried to solve it by making an OMF export in FCP and importing it into STP: same problem. One of the many bugs. We have to wait some more versions before this promising application works on a pro level.

IPhone 5 voice call quality fade in and out. Noise Cancellation interference?

I've been having this huge problem with the iPhone5. The evidence i've collected seems to indicate this is a problem with all iPhone5's.
On calls in certain places both indoors and outdoors, the callers voices over the iPhone5 fade in and out. Their voices occasionally completely fade completely away, and only come back momentarily. The low volume for 50% of the time forces me to raise the volume, but raising the volume does not help because when the voice does come back, the volume is too loud for my ears.
I went back to the Apple store and they are not able to help me. They suggested a clean restore, which I did. They offered to replace the phone, which I did, but it is the same problem.
- iPhone 5 vs. iPhone 4S, the fading does not occur. I make the call to the same voice mail system I have, and the sounds from the other side are consistently the same volume for the 4S, but fades in and out for the 5.
- I connected up a 8mm jack between my iPhone 5 and my mac in an attempt to record this problem. In that instance, the sounds from the voice mail DO NOT fade in and out. I did find out that the dynamic range on the iPhone 5 is MUCH greater than that of the iPhone 4S, for some strange reason.
- When I hold the phone up to my ear, the fading in and out does occur, but it is less noticeable. But it's still there.
- When I leave my work area the problem goes away. However, because the iPhone 4S on the same AT&T service does not have this problem, this leads me to believe it's NOT a lack of transmission power from the AT&T cell tower. Rather, it is a reception issue at the iPhone5 side.
- I turned off LTE, data and then made the calls. Same issue.
I use this phone to make 60 minute calls for conference calls frequently. I cannot use it. Please advise. I am seriously considering returning this phone. Except i've sold my old iPhone 4 already. I'm in a bad place. Please help.
Here's another post of a fellow with the same exact problem.
http://forums.macrumors.com/showthread.php?t=1456404
Apple, please look into this. I believe this is a problem with the noise cancellation software.

I've got an update on this problem with fading volume. I've isolated it to the set volume on the phone for voice calls when using headphones. When the headphone volume is set between 1 and 6 (out of 16 squares) the callers volume will consistently fade in and out. The fading which is normal to zero volume at 2-5 Hz is serious enough that normal conversation is impossible. When the volume is raised above 6/16 then the callers voice stabilize and I can hear all their words again. Unfortunately, at 6/16 volume their voices are too loud for the headphones.
Furthermore, when headphones are plugged in, and I initial a call after the iphone5 was idle for several minutes, the first dial tone has preceded by a very loud pop an the tone, as though there was too much pressure (charge) that was dissipated all at once.
Other details:
- I used 3 different earphones, iPhone 4 headphones, altec earphones, an the new iPhone 5 earbuds. Same.
- I turned on and off lte, data, Bluetooth, wifi. Problem persists unaffected.
- when switching to iPhones earpiece and mic, the fading is gone.
- I have 3 out of 5 bars where I teste this, in the city outside and on hwy 5 in central California. Same symptoms in all places I've tested.
- I have exchanged my phone at the apple store. Same issue with both iPhones an I suspect all ipjone5s.
- the ipjone4s does NOT have this problem when the volume is set lower. I can tell that the iPhone 5 must have a new audio filter to make the sounds have larger dynamic range. I liked the 4s better, because it is easier on the ears!

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How to fade in and out

Dear Forum;
This is my very first time opening Garage...
I am creating a compilation of my concerts - tunes are too long
how do I fade in and out on the same track?
& how do I add reverve - please help a dummy - or where in the manual? Thanks

Move your cursor onto the audio track, to the upper-left (or upper-right) corner until the cursor icon changes to a small envelop. From there, click & drag out to create a fade. From there, you can double-click on the audio file to get a HUD with all the different types of fades available.

Fade in and Out

Hello Everyone,
I would like to ask the Pro a question.
I have a video clip which i want to cut and fade in and Fade Out the video and Audio.
I have searched on internet but i can not seems to find the right answer.Is it that complicated to do fade in and out?
Is there a simple way to fade in and fade out the entire video(video and audio) and NOT only video or Audio?
How can i do that.
Thank you very much

On a single clip, fade and dip to black are similar. If you have two clips next to each other fade will do a mix between them, using the dip to black will fade out the first clip going to black and the fade up the second clip. The yellow line shows keyframes, this is a way of changing effect parameters against time. This is an Adobe help file about them Adobe Premiere Pro Help | Adding, navigating, and setting keyframes If you search the net there are many tutorials. You can keyframe audio and video. Have you tried adding the default fade transition to the audio? I have no problems with it. The cpu can run flat out, if needs be Premiere will slow down the export to match the quality of your hardware.

Simple fade-in fade-out doesn't work with premiere 9

Hello,
I'm using Windows 7, service pack 1 on a Dell computer XPS 8300 (Intel® Core™ i7-2600 CPU @ 3.40GHz × 8), 64 bits.
Complex fades work, but not simple as fade-in fade-out.
Note I had the same problem with Studio : it was solved by not using hardware acceleration. With Studio, it was possible to do so in the options.
What with Premiere ?
Thank's for any help

Christil
Premiere Elements 9 on Windows 7 64 bit (are you working from the 9.0.1 Update?)
Are you referring to the fade in fade out video audio shortcuts?
How are you doing what you refer to as "Complex Fades Work"?
I am not aware of any hardware acceleration control in any Premiere Elements options related
to Fades issues.
Please review the following related to the Fades shortcuts and see if any of it applies to your
situation.
http://www.atr935.blogspot.com/2013/06/pe11-timeline-fade-out-shortcuts-and.html
Is your issue specific to one particular project? Is this a "it worked before but not now" or "it never
worked before" type matter? Pending further details, we might consider deleting the Adobe
Premiere Elements Prefs file or, if necessary, the whole 9.0 Folder in which it exists.
But, we will await further details from you before deciding what next.
Thank you.
ATR

Creating a Template with Fade In / Fade Out

Hi Guys,
I need to make a number of audio samples for promotion - I have a lot of audio files so I need to make a template which is 3 minutes long and has a 10 second fade in, fade out either side. How would I go about making that? I'm new to Logic so sorry if it's a dumb question.
Cheers.
M

Hi Matt,
I don't think it is a dumb question, you provided all the info needed to help you out. It is a newb question though (but they are not by definition dumb). here's what you need to do:
Open an empty project, create one stereo audio track. Hit 'A'. The track now goes to automation mode. Click in the track, it will create 'nodes' that you can drag at will. You make 1 node at the start (bar 1) of value -∞ dB, create a second node of 0.0 (or -6.0) dB at 10 seconds and at 2'50", and create node 4 at 3'00" of value -∞db again.
From the file menu, now select "Save as Template...", enter a name, done!
regards, Erik.

Text changes size during fade-in/fade out.

I have a project where I wanted to lay in a simple full screen text element...just white text over black...between groups of clips. I'm VERY new to FCP. I had no problem creating the text, setting the length to 5:00 sec, and inserting it into the time line. I easily stuck a fade-in/fade-out 1 sec transition on either side of the text. After outputting to DVD, the text re-sized at the end of the fade in and at the beginning of the fade out. I'm working in anamorphic. I found the aspect setting in text and changed it to 1.77. Still NG. Any pointers would surely be appreciated.

I really just wanted to dip to black and come up text, followed by another dip to black and up on content. I tried dissolving to a color (black) and the distortion of the text during the dissolve was eliminated.
So what is the difference between a fade in/fadeout dissolve and a dissolve to black?

How do I adjust my titles so they don't fade in and out? I have hundreds of photos/videos on screen for a second or so each, for a year-long birthday video, and I need the dates in my titles to be steady rather than fading in and out spastically.

I have been working on a project since December of 2012 for my son's first birthday. Basically, it's a photo or quick video each day of his life so far. I used the "upper" title and made the titles not fade in and out, because that could give someone a seizure. The idea is a seamless title that ticks away each day. But in the new iMovie, it changed my settings, and I can't for the life of me find how to change them back.
Now, each date flashes in and out, in and out, in and out. Fractions of seconds go by. It's really distracting and annoying.
How do I get the titles to remain on screen and not fade in and out? I had it just how I wanted it, but now we're rapidly approaching my son's birthday, and the video is suddenly a mess.
How do I fix this?

I am working with the very same concept for my project and the auto fade in and out has messed everything up. If I hear or a fix I'll be sure to reply here to let you know!

Made a drop down menu. How can I get the drop down to fade in and out? !

Hi guys!
I've created a drop down menu (with the help of you legends on here! )...Now I just need it to animate so when the user hovers over the main menu item, the drop down fades in.
Here's the HTML I have...
    <ul id="nav">
        <li><a href="#">Nav 1</a></li>
        <li><a href="#">Nav 2</a></li>
        <li><a href="#">Nav 3</a>
            <ul>
                <li><a href="#">» Sub Menu 1</a></li>
                <li><a href="#">» Sub Menu 2</a></li>
                <li><a href="#">» Sub Menu 3</a></li>
                <li><a href="#">» Sub Menu 4</a></li>
            </ul>
        </li>
        <li><a href="#">Nav 5</a></li>
        <li><a href="#">Nav 6</a></li>
    </ul>
...and here's my CSS...
ul#nav {width:920px; height:35px; list-style:none; padding:0; margin:0; background:url(navBg.jpg) repeat-x; z-index:999;}
ul#nav li a:hover, #nav li a:active {background:url(navOn.jpg) repeat-x; text-decoration:none;}
ul#nav li a {color:#E0E2E7; display:inline-block; float:left; margin:0; padding:10px 19px; width:auto; text-decoration:none;}
* html #nav li {display:inline; float:left; } /* for IE 6 */
* + html #nav li {display:inline; float:left; } /* for IE 7 */
#nav ul {width:208px; left:-9999em; list-style:none; margin:35px 0; padding:0; position:absolute; z-index:999;}
#nav li:hover ul {left:auto;}
#nav li {float:left;}
#nav li li a {width:190px; background-color:#efefef; color:#2e2e2e; padding:8px; margin:0; }
#nav li li a:hover {background-color:#000; background-image:none; color:#FFF;}
#nav li:hover {background:url(assets/images/frame/navOn.jpg);}
From what I can make out, I assume I need either Javascript or JQuery...
Does anyone know how I can get the drop down to fade in and out?
Thank you very much and I hope to hear from you.
SM

Yes, you'll need a client-side script to do fade-in/fade-out fx. Look at jQuery Superfish.
http://users.tpg.com.au/j_birch/plugins/superfish/#examples
Nancy O.

Audio Fade In Fade Out -1 Sec?

Similar Messages

Maybe you are looking for