Audio fades out after switching from silent

I generally have my phone on silent mode at all times. Occasionally while watching a video I'll have to take the phone out of silent mode to get the accompan audio. When I do so, the audio will play for a moment then fade to silent. Pausing and resuming the video resolves the issue but it's extre annoy. I'm sure I'm not the only one that has experienced this and this may have already been asked. Any help that can be provided woild be much appreciated!

sorry for for the typos! Got ahead of myself!

Similar Messages

Nano fades out after unplugged from computer.

Please.... is there any suggestions for a 2nd generation ipod nano that charges when plugged into the computer and plays music when hooked to a wall socket but turns off when unhooked from either one and wont turn back on. I have tried the toggle hold button with menu and select and i have tried the restore throught the itunes site. Anyone know what is wrong with it?? or what i can to to fix it?

Sounds like the battery is dead. Rechargeable batteries can only be recharged so many times. For example, common laptop batteries can be recharged about 1500 times. I'm not sure how many times an ipod can be recharged. That's one of the problems with building the battery into the device. If it's any consolation, flash memory can only be written to so many times too.
Most ipods are designed to be disposable. If they weren't, they would have replaceable batteries and store songs on memory cards (like digital cameras, for instance). Also, having Apple service them costs almost as much as buying a new one. Clearly, Apple thinks you need to buy a new music player every 2-3 years.

NI-4060 giving invalid 1st reading after switching from or to LOW Resistance Measurements

We've been using TestStand & LabView to test various Circuit board. On series of test involves checking for a short circuit (Measure Low Resistance 4-wire) then measuring for a 3.5Vrms signal on another part of the board.
For each measurement, the following NI-DMM VI's are used in order:
niDMMInit, niDMMAutoZero, niDMMConfigure, niDMMMeasure, niDMMClose.
If we do the Low Resistance 4WR measurement, then a AC V measurement, the 1st reading from the DMM is approx 10x too high, if a 2nd reading it done it is then OK.
It doesn't matter how long a delay is before we take the 1st measurement, it's always approx a factor of 1E+1 out.
If however we don't do a Low Restance prior to
the AC V measurement, then the measurement is always correct.
I expermented with turning AutoZero on & off, and various resolution settings, however none of these seem to have an effect on the result.
Can anyone explain these strange results?
Thanks
Simon Holman
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

Thanks, after playing with a few more settings I found if I turned the Cacheing off niDMMInitWithOptions, with "Cache=0" that everything worked fine, but it would take a couple of seconds to get the first AC measurement after switching from resistance.
Simon
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

Audio Drops Out After 30 Seconds

I have just installed Premiere Elements 12 on a new Toshiba with Intel i5 and windows 8. When I play a viedo through Elements the audio drops out after 30 seconds. When I play the same viedo through Windows audio does not drop out. I have an older HP with Intel i3 and Windows 7 running Premiere Elements 10 and I do not have any issues with the audio dropping out. This is the first time I have used this forum so I hopr I'm doing this properly. Thank you, Bob.

With a slower machine like that, it's possible you haven't given the program time to fully conform the audio and video in your file.
Clear the file from your Project Assets and re-add it to your project. Watch the progress along the bottom of the program and wait until it has completed its conforming before you start editing.

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3 verschwommen)

<Preran> For the benefit of moderators here, I used Google to translate your content into English:
Good day,
I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
I have already tried the following:
In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
When I got the set to the mean value, the writing was not so blurry, but still not really readable.
Experiments with Clear adjust TypeText were not successful.
There is a trick, so the font is larger
If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
However, the text is then when uploading larger.
What can I do now?
For speedy help I would be grateful
Best regards
Guten Tag,
ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
Ich habe folgendes schon probiert:
Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher Prozentwert eingestellt ist.
Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
Einen Trick gibt es, wodurch die Schrift größer wird
Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich könnte den Text so eingeben und auch lesen.
Allerdings wird der Text dann beim Hochladen auch größer.
Was kann ich jetzt tun?
Für baldige Hilfe wäre ich dankbar
Mit freundlichem Gruss
Renate Gundel

I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

Audio cuts out after 2 minutes

I'm having a bizzare trouble with the Audio cutting out after 2 minutes while watching TV. It comes back for exactly 2 minutes only after I change the chanel, and with every subsequent chanel change after.
I have the Audio out on the @anywhere card connected to the line-in on my Audigy 2 sound card via a stero cable (which I've changed) and I've verrified that my sound card is ok by running other devices into the computer through the line-in.
I've also had alot of trouble with the MSIPVS software crashing and causing my system to hang. I've only had the card and software for a short time and am still working out the bugs but any help will be appreciated.

Did you look at the top of THIS forum? In the Announcements and Important threads? I know there is a sticky thread about sound cutting out, it may, or may not be related to the one problem you have.

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server the b2b application and the xcm configuration detail cannot be accessed
it gives the following error.
#1.5 #00059A3C7800006D0000002C000015980004B30C3E45830D#1322765072300#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##n/a##820feec01c4c11e1c79300059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server/WebRequests#Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
Exception id: [00059A3C7800006D0000002A000015980004B30C3E457F63]#
#1.5 #00059A3C7800006D0000002D000015980004B30C671A5D9B#1322765757605#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#0##n/a##1a892d501c4e11e1b99700059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:330)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com/sap/isa/core/ActionServlet : cannot initialize class because prior initialization attempt failed
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:319)
     ... 14 more
Caused by: java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:117)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
     ... 4 more
Caused by: org.apache.commons.logging.LogConfigurationException: java.lang.reflect.InvocationTargetException
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
     at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
     ... 13 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
     ... 17 more
Caused by: java.lang.NullPointerException: while trying to invoke the method com.sap.tc.logging.Location.debugT(java.lang.String) of an object loaded from field com.sap.isa.core.logging.sla.IsaLocationSla.location of an object loaded from local variable 'this'
     at com.sap.isa.core.logging.sla.IsaLocationSla.debug(IsaLocationSla.java:583)
     at com.sap.isa.core.logging.sla.IsaLocationSla.<init>(IsaLocationSla.java:46)
     at com.sap.isa.core.logging.IsaLocation.getInstance(IsaLocation.java:52)
     at com.sap.isa.core.logging.StrutsLog.<init>(StrutsLog.java:25)
     ... 22 more

Hi,
That particualr error should be solved by adding the following parameter to your instance profile:
jstartup/vm/parameters = -XX:-ExtendedExceptionMessages
The issue is related to note 1693118
Kind regards,
Cathal

Some issues after switching from 686 to x86_64

Hi all,
after switching from i686 to x86_64 using this link I am now facing some minor issues with some packages. I already activated the multilib repository but some problems remain. I checked the binaries in /usr/bin for 32 bit executables as described in the above link and there are 177 "bad" binaries left. I thought all of these were not executable, but surprisingly wine was. Strange!
ffmpeg is another 32 bit executable and not runnable. So I tried to reinstall it, but that failed:
> pacman -S ffmpeg
warning: ffmpeg-1:2.6.1-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg-compat: requires libx264.so=144-32
libx264 is installed and didn't want to be reinstalled either:
> pacman -S libx264
warning: libx264-2:144.20150223-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg: requires libx264.so=144-32
:: ffmpeg-compat: requires libx264.so=144-32
Can someone give me a hint, what's the best way to solve this problem?
Thanks in advance, Zmann

I think the first issue you will run in to is that the interface for an old P4 hdd will probably not be the same as a new computer. Besides that, it will probably be vastly slower than what comes with a new computer. I think that is not the best idea.
The only wat to really "trasition" between two archtectures that I know of is to copy configuration files over and have pacman dump a list of explicitly installed packages from the main repos. Then use that information to reinstall all those packages.

No Audio after switching from Headset/Speakers

Product : Sound Blaster Z
OS : Windows 7 Ultimate x64
Issue : No audio when switching from headset to speaker or speaker to headset
Description : I used to have it working perfectly fine before I formatted my computer. I could be playing a game or watching a movie using my speakers, then I would use the switch in the SB Control Panel to make it play through my headphones and everything would work. Now if I do that, I loose the audio from that program that is currently running. Meaning I have to restart the program and the audio will come through the specified audio device. Sounds like the windows setting "Allow applications to take exclusive control of this device" is acting up, but I have tried this with both the setting on and off.
Any help is appreciated.

AFAIK some applications loose audio on switch, while others don't.
are you saying the same app once didn't loose audio on switch, now does after a format ?
in other words, do you believe that before the format nothing ever lost audio on switch ? that would mean there's a way to solve it, as most of us, if not all, are having that same issue (which is Creative's fault, not Microsoft's).

Audio fades out automatically after 15 minutes although not muted

Hi
While listening to iTunes, the music fades out automatically after 12-15 minutes, also system sounds won't play anymore. All settings are set correctly (internal speakers, volume), the iMac is not muted.
After some time switch off or in sleep mode, it plays the sounds again, but after 12-15min, it's quiet again.
Any idea ?
Thanks
Eric

It was bought online through a third party retailer, so its not exactly as convenient as driving to the store. I'd rather exhaust my options before having to send it back.

Audio fade out not working

I've imported clips from my camera to iMovie HD 6 and created a 2 minute "movie." I imported a song from iTunes but want it to fade out before the movie ends. I've followed the instructions and dragged the volume bar down where I'd like the fade out to happen but nothing changes. I've also extracted audio from the clips I'd like to play without music but nothing changes. The audio also plays past the end of the last clip. I also followed the instructions to delete the audio from selected clips by placing the cursor in the audio bar and waiting for it cursor to change form into that t-bar shape but it doesn't happen. I've closed out and re-opened the project more than once. Following the instructions was easy but there are simply no results. What am I missing? Thanks!

Hey, catspaw!
You remembered! My family history project now is complete from 1979-2008, with 2009 being compiled on an ongoing basis as I get the photos and videos.
I have nearly all the old photos scanned into iPhoto for both my husband's and my side of our family. There are only a couple of videos of our parents talking about their childhoods or some specific childhood memories, and one of my father-in-law telling of his days in the Navy in WW II, when he was one of the first Americans to go into Nagasaki.
I had all the photos scanned in already, but when the drive failed several months ago, I apparently lost a few of the photos. So my fil will need to lend his to me again. I also have some baby photos that my parents insisted they did not have, but they did, so I will be getting them next week.
Then, I have about 2000 slides that I'd like to put into this collection. It is easy to scan them, and I have already done about 400, but the ones from a couple of trips are just going to take too much time, so I found a local photo place that will scan them for me and put them onto a CD.....and they charge less than anyone else I have found. The draw for me is that they do it locally so I do not have to worry about the original slides getting lost. I am planning to take the slides in tomorrow or Monday. I think it will take them about a week or so.
I have 4 iMovies in progress for the 'old' photos. After I get all of them finished, I think I will upgrade to Leopard and install iLife 09 and begin to play around with iMovie 9. The big concern for me is that it does not allow exporting back to camcorder. I really like to do that with my edited movies so that I have a nice digital tape of the finished movie. Since I now will have to do only one family movie/photo project per year, I will have time to make little creative movies for the grandkids. I may even take some classes.
I have also thought about using Final Cut. I have FCE, not Pro, probably enough for my purposes. Ihave used it a couple of times for short movies. It has quite a learning curve, and it is not so helpful as iMovie since nothing is preset. Of course, it gives one great flexibility. I think that doing a few movies will give me experience enough to consider making the switch for the family movies, and maybe using iM9 for the short ones.
I have been following with interest the posts regarding getting the best quality from iM9 when putting it into DVD, and I have been learning a lot. Very thankful for these discussions.
Also, my camcorder is getting older and I am considering getting an HD camcorder; still have to think about whether I want to continue with tapes or not.....
I know that FCE and FCP take footage in DV format, so the DV tapes would be easy.
What do you think?
Return greetings from here....we are going to see some friends next weekend who have lived in the US for many years, but are from Adelaide!

OS X partition becomes corrupt after switching from Bootcamp

So I've had to reinstall os x 10.9.1 no less than three times this week and multiple times before in the past after switching between os x and windows 8.1. This usually happens after I've been using windows for a prolonged period then switch back to os x but it happened today after reinstalling os x from a time machine backup just yesterday. I'll switch between the two and os x becomes corrupt and begins the loading bar sequence after selecting the os x partition via the refit boot manager. I tried repairing the partition using disk utility from the repair partition and an external installation of os x 10.9.1 but every time the disk becomes corrupt and needs to be wiped and reinstalled or install a time machine backup. I've lost count of how many times I've had to do this and to make things even worse both of my external disks have become corrupt after being disconnected for two days while I sort this mess out. Does anyone else have similar issues or can locate an issue somewhere?

Yeah I reinstalled osx 10.9.1 and installed all my apps, put everything back then used bootcamp to create a partition for windows then used wineclone to install my windows 8.1 backup. I jumped from windows > osx > windows > osx inside an hour to move around a few things and I forgot verify bootcamp after I installed the backup and that last time I booted to osx it was corrupted. I used disk utility from my external installation and the recovery partition and both times they need repaired which only came up with the backup and wipe notification window. There have been two occasions where I was able to fix the osx partition from my external osx installation and continue using osx quite perfectly but usually the partition becomes un-mountable after it fails to repair. Usually when this has happened the twenty something times before it's after a prolonged period of a few weeks using windows.
I'm using refit boot manager and paragon NTFS 11 which may be the only software I've installed that could be corrupting the boot.
SMART status is verified

Video playback slow and audio drop out after render

Hi
I have downloaded a trial version of After Effects from the cc,
Problem is everytime I render ou,t the video playback is slow and the audio drops out
This happens with AVI or Quicktime files.
Using a Intel i5 quad core, 8 gig of ram 250 gig ssd.laptop
Render/export in Premire pro is fine.
Can any one help.
Regards Phil Green
Blue Room Media.

It sounds like you might be hitting the space bar in hopes of getting real time playback. Sorry, but AE doesn't work like that, because it does totally different things from an editing application like Premiere.
And if you've downloaded the tryout version, you really ought to learn how AE works... and a short description is "it doesn't work intuitively". You can frustrate yourself in a hurry.
But this can really help;
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest

Audio drop out after burning to iDVD

I am running FCE 2 and checked all of my audio (mixed it down and everything). Plays well when I run FCE. When I burn the clips to iDVD, I notice that the audio drops out in certain scenes, and it's the same scenes. Ruined 5 dvds so far after trying to a few things.
I am using all internal HDs (Extended Journaled). Any suggested would be appreciated. Thanks

Hi
a. Audio from iTunes - has to be used by a work around
I do - create a Playlist in iTunes with needed audio
Burn out as an Audio-CD (.aiff) Not .mp3
Use this audio in Your FinalCut project
b. I do from FCE/P to iDVD
• Export out as a QuickTime .mov file
• Not selfcontained (not important but saves time and space)
• NO QUICKTIME Conversion (Important)
c. To get iDVD to run OK
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk ! (others of no importance)
• I use Verbatim DVDs
• DVD-R
• Burn speed set down to x4 or x1 (only relevant to newer iDVD)
(Instead download the Hack (Hurz and Pfurz) that makes it possibly to do a DiskImage with iDVD4
if earlier iDVD versions - forget this
then save as a DiskImage - test it with DVD-player tool and see that it runns OK
THEN do the actual DVD burn by using Disk Util tool from this DVD image You just did.
AND Here You can set down burn speed to x4 or x1.
• iDVD 4 disc image burning can be enabled through the patch Hurz and Pfurz - search the net.
Good luck Yours Bengt W

Audio fades out after switching from silent

Similar Messages

Maybe you are looking for