Audio files are missing in iMovie HD 6

I have 10.5 installed and was using iMovie 08. I was having problems exporting a movie, some of the clips were all black. So I downloaded iMovie 06 and all the iLife audio files are missing.
They're still there in '08 but not '06. How do I get them in? Is there a way to import them?

I have never used Screenium nor do I know anything about it, but iMovie 6 prefers footage in .dv format. You may have more success if you use Streamclip to convert the .mov to .dv before importing it into iMovie 6

Similar Messages

Logic Pro 9- I saved a song- the audio files did not bounce and are nowhere to be found. The song is still there, but the audio files are missing. Any ideas?

I have searched the computer by song name in the audio files.
I have opened up media files and looked everywhere.
I tried remapping where they would be saved and hoping they were updated.
Any help finding where they are located would be great. The song still loads when I open it, I just can't find the audio files!

Have you tried using the built in Browser in LP?
http://help.apple.com/logicpro/mac/10/#lgcpc788cc57
Note: It works the same way in LP9 as in LPX

IMovie 10 says my files are missing.

I stopped the share task by closing iMovie 10.0.1 (there was no indication of on-going tasks). Now, iMovie says my files are missing and mentions reconnecting to the drive "null". ?? I'm afraid I just lost 2 hours of work.
I tried restarting everything. I ran disk verify, it's OK.
I have had much trouble since "upgrading" this application.

Hi
I stopped the share task by closing iMovie 10.0.1
or Panic Halt or Forced STOP down
are ways to "knock away the feet" under iMovie - and all unpleasant things can occur e.g. connections lost to material in process.
_ Can there be more than one hard disk (Memory) on Your Computer as external Hard Disks, USB-memory CDs or DVDs - that can hold material You used in Your Movie project ?
_ are it/they connected and working OK too ?
Have You tried
_ Trash iMovie pref. and cashe files - often helps after a sudden stop (power loss etc)
_ Repair Permissions
_ Full Shut down (Mains power disconnected) - and let it be so for 30 minutes or more - at least some ports get re-set and may be more
_ keep it up and running (by it self) from late night (23:00 hour) to about early early morning (03:00) - then some time a repair program kicks in in at least some Mac OS versions.
(This can be fouled by wrong-set the Clock to say 12 hours before - and Mac is fouled that it's night)
For more elaborative rescue scheme - others must come in and help - AS I NEVER touch or alter any of the iMovie folders named
_ iMovie Event's - or -
_ iMovie Project's
as this is a High Risk action and all can easily be lost.
But there are Genius here that Know - howto try to Copy and rescue material from them in this forum.
Yours - best wishing - Bengt W

New Media Encoder Error: video and/or audio filters are missing...

My colleague reported this error popup window while using Adobe Media Encoder CC (up-to-date):
"video and/or audio filters are missing and the rendered output may not match the original"
I've been seeing similar errors the past few days. I can't remember if the wording was the same in the errors I saw, but the circumstances were the same.
I've never seen this popup error before the most recent CC update.
Some background info:
I queued up multiple Premiere Pro pproj files as usual from within Premiere
without rebooting or deleting any cache or temp files or anything, I start the queue
I have no special plugins installed in Premiere. Vanilla CC install.
Windows 7, 64-bit
This error doesn't tell me what audio/video filter(s) are missing. The output files, once I dismiss this warning, are perfect.
The major problem: It stops the queue dead in it's tracks. Sure, it might seem handy to stop and give you a warning, but when it's a false report and there's nothing wrong, it's killing us, because we queue up multiple files for encoding overnight, and we're not here to get the popups.
What is likely causing this? Is it a bug that this is appearing so frequently? Has anyone else experienced this besides my colleague and I?
Thanks!

Update for anyone experiencing this issue:
We are still investigating the cause of the issue and would really like your help tracking it down. If you run in to it I would be happy to jump on the phone with you and preferably do a screenshare as well. If you want to run some tests for me, this is what may help us track it down:
0. Please make sure you are updated to the latest version of Premiere Pro and AME, which at this time are Premiere Pro 7.2.1 and AME 7.2.
1. Simplify the project. Create a copy of the project and eliminate anything in the project that isn't related to the sequence(s) you are exporting. Then run the encode again. If it still occurs, move to the next step. If it doesn't occur any more, repeat step one and only remove half of the unused items (sorry, this is giong to be a manual process). Rinse, repeat.
2. Open your sequence in Premiere and press Cmd/Ctrl + A to select all clips in your sequence. Right click and select Remove All Effects. Export again. No repro? Go to step 4. If it still repros, go to step 4.
3. Make all the media offline. Export again. No repro? Go to step 4. Repro? Go to step 5.
4. Send me a message with as much detail as possible. Even better would be if you could provide me a copy of your project file.
Your help in tracking this issue down is greatly appreciated. Thank you.

VOB files are missing footage that's on the DVD

Hi all,
I'm putting together a memorial film. The family gave me all their home movies that have been put on DVDs. I'm using MPEG streamclip to convert the VOB files to DV files that I can import and edit in iMovie (or FCP).
Here's my problem: The VOB files are missing footage that I can absolutely see when I play the DVD. I've tried exporting the files to AVI and .mov files but the result is the same.
Can someone help me figure out how to access that missing footage? It's very strange.
Thanks!

David--great idea--thank you! Unfortunately the result is the same. I am beginning to wonder if the DVD wasn't what's that called...finished? properly. There it all is on the TV but I have not figured out anything, despite great ideas and strategies that would give me a different result.
Thanks again!

I changed drives and consolidated my library, but many files are missing

I recently changed my the hard drive on which my iTunes media were stored. I followed instructions on this page:
iTunes for Mac: Moving your iTunes Media folder
However, after consolidation I discovered that quite a lot of folders and files are missing from the new created file. The missing songs are still in my library, and when I try to play them, I get the exclamation mark and have to direct iTunes to the original files on the old hard drive.
I've restarted everything and tried to consolidate again and again, but the files remain missing.
What should I do?
All advice gratefully received.

I am not doing it in ITunes, but i did down load the song from ITunes. I loaded the song on to my Nano, but in my menu selections it doesn't show the song or the artist in any search format. However, when i plug in my nano to my PC I see the Nano library on my PC drive listings and that song and artist are there. I can click on the song and it will play in Windows media on my work PC. I did notice that the format for most all the songs in my library on my Nano are MPEG - 4 audio Files.
Thanks for your help, Mel

ITunes wont open. when I click on it, it says " iTunes can not run because of the required files are missing. please reinstall iTunes.

iTunes wont open. When I click on it, it says " iTunes cannot run because some of its required files are missing. please reinstall iTunes". PLEASE HELP!

See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

Tried to delete an FM book, but won't delete; however files are missing

I'm using RH7 in TCS1 in Windows Explorer.
I imported FM book files by reference into my project. I had forgotten to check abook file prior to import and didn't notice that the book file did not have the necessary graphics. So I fixed the file, then tried to update the book file in RH7. The graphics did not import into RH, so I thought I would start over from scratch and delete the book file in RH. It will not delete and causes RH to crash. The delete option is available, but it doesn't delete them.
So I went into Windows Explorer and deleted the files from there. Then I get a message that says files are missing, and that I need to delete them from Project Manager which is what I was trying to do in the first place.
Can someone please help me delete these files?

Just an update to this posting. I did not have the latest RoboHelp patches installed. For some reason, RH wouldn't let me install
them. So I had to have a complete uninstall of RH, then reinstall it. Once I did
that I installed all of the patches and my book files were deleted.
Case closed

TS1717 I tried to open iTunes but a box pops up. In it is written "iTunes cannot run because some of its required files are missing. Please reinstall iTunes." I have done so a number of times but nothing is working. How can I fix this problem?

iTunes will not open because a dialog box pops up with "Itunes cannot run because some of its required files are missing. Please reinstall iTunes.". I have done so a few times to no avail. Any solutions for this problem?

No you will not lose your content reinstalling iTunes.
Do this:
1: Download and run the Registry Cleaner of the free Ccleaner.
http://www.piriform.com/ccleaner/download/standard
2: Next follow this Apple document to un-install iTunes
http://support.apple.com/kb/HT1923
3: Just for good measure, run Ccleaner again
4: Reinstall iTunes.
5: Come back here and click my "Correct answer" button.

FAQ: My files are missing from the Library, or How to reconnect your images?

What is the Lightroom Library?
The Library module of Lightroom can be used to arrange, codify, systemize, group, and classify your media. When you import your images and video into the Library, you are adding information about your files to a catalog. Your files remain on your hard drive where they were, unless you are importing them from a camera, in which case the files are copied to your hard drive to a location of your choosing.
What is a Lightroom catalog?
The catalog is a database that stores information about the files you've imported into Lightroom. When importing a file, the first thing Lightroom does is collect the file's name and location on the hard drive. If the file has any attached compatible metadata, such as keyword tags, these are imported as well. You can use multiple catalogs and your catalogs can be carried forward from version to version.
Why does Lightroom say my files are missing?
Since the catalog database only stores information about your file, and not the file itself, if any of that information is changed outside of Lightroom, the connection to the file is lost. There are three ways this can happen: the file name is changed, the file location is changed, or the file has been deleted. If you need to rename, move, or delete a file, you can do so within the Library module, and then the connection is not lost.
What is Reconnecting?
When a file has been renamed, moved, or deleted, the catalog database needs to be updated with that new information. The Reconnection process allows you to point out a file's new name, it's new location, or to delete the database entry on your file if the file no longer exists on your hard drive.
Where can I learn more?
The Lightroom Catalog
Introducing catalogs
Understand Catalogs in Lightroom 2
Understanding the Lightroom Catalog System
Managing Files in Lightroom's Library
Adobe Help - Importing Photos
Adobe TV - Importing Photos
Adobe TV - Using the new import window
Adobe TV - Importing and Organizing Your Images
Adobe TV - Importing Existing Images
Adobe TV - Two ways to Import
Adobe TV - Moving Files in Lightroom VS the Operating System
Adobe TV - Moving Folders Around After the Fact
Adobe TV - Move & Archive Images, and Export a Catalogue
Video Workshop - The Filter Bar
Managing Catalogs in Lightroom
Managing catalogs and files
Preference and other file locations | Lightroom 4 - 3 - 2 - 1
Catalog FAQ | Lightroom
Single or Multiple Catalogs in Lightroom
Working with Multiple Catalogs
Merging Individual Lightroom Catalogs into a "Master" Catalog
Importing an Elements catalog to Lightroom
Lightroom 3 can't upgrade Photoshop Elements catalogs
Backing up your catalog
Exporting a catalog
How to Migrate LR to Another Computer
Reconnecting Media in Lightroom
Locate missing photos
Dude! Where are my photos?

Similar happened to me when i moved my iTunes library from XP to Win 8.1. Apps were in iTunes but would not sync to iPhone - could not find oritinal file. Win Xp and 8.1 have different file paths for My Documents and My Music. Locate the folder within iTunes called Mobile Applications. It should have a file with an IPA extension for each application. Add that folder to library. That will refresh the iTunes database so that it knows where to find the apps. I had to do that to my entire library (music, podcasts, etc)

ITunes 10.6.1.7: "iTunes cannot run because some of its required files are missing. Please reinstall iTunes." ?

Fakt:
iTunes 10.6.1.7 Fehlermeldung: "iTunes cannot run because some of its required files are missing. Please reinstall iTunes."
Jeder Versuch iTunes zu starten war bisher vergeblich: unter anderem auch das Vorgehen nach Artikel HT1925 der knowledge base.
Frage:
Windows XP Neuinstallation und/oder Installation einer älteren iTunes-Version als letzter Ausweg?

Antwort und Lösung eine Woche später:
Deinstallation und Neuinstallation von iTunes 10.6.1.7 produziert dieselbe Fehlermeldung.
Es hilft nur eine Reparatur von iTunes unter Systemsteuerung / Software. Allerdings muss hier Windows XP mit Hilfe von Ausführen / msconfig im benutzerdefinierten Modus erneut gestartet werden - ohne APSDaemon, Avira und Skype zu laden!
Die Fehlermeldung unterblieb, die Reparatur schritt voran, meldete Erfolg und benannte eine wohl defekte Datenenbank unter C:\Documents and Settings\MyAccountName\My Documents\My Music\iTunes um in:
iTunesLibrary (Damaged).itl

ITunes cannot run because some of its required files are missing.....

"iTunes cannot run because some of its required files are missing. Please reinstall iTunes."
Is the error message I receive when trying to launch iTunes or updating my iPod.
I have tried uninstalling both iTunes and qtime, restarting, installing with the iTunes75Setup.exe found on the iTunes download page from apple.com.
To help narrow the issue, during install/uninstall/repair this error also occurs as it is "Registering iTunes automation server"
any suggestion on how to resolve this issue would be great

First uninstall Quicktime 7.3 only in control panel. Then download Quicktime 7.2 from http://www.apple.com/support/downloads/quicktimeforwindows.html. Hopefully it works for you because it worked for mine.

During installation of iTunes appears an error message: Itunes cannot run because some files are missing. What can I do?

Recently I received an iPad2 as a gift. I had iTunes because an iPod I had. First I put some productivity apps through my computer. Then I bought some other games apps through WiFi. then when I try to synchronize, I lost my productivity apps and just keep those buy on WiFi. Now I try to install iTunes again, and what I received at the end is a message that tells me "iTunes cannot run because some of its required files are missing. Please reinstall iTunes".
I did it a couple of times. Same result. One of this times, I also retired those programs recommended on help page: iTunes, QuickTime, Bonjour, Apple Mobile, etc. (in the order indicated)
Your help will be appreciated.

same issues here... Using windows 7... I can't install none of the 3 soft. No Safari... No Quicktime... No Itunes... Running 32 bit windows... Error messages "Error 7" and some other error messages durint install... Any help will be appreciated... Thanks

My music files are "missing". How do I get itunes to locate the files without identifying each music folder (files are in separate folders under torrent data and I don't want to open each one of them individually)

Just like the title... Music files are missing and I don't want to locate each folder individually, how do I get itunes to locate all of the music without taking each music file out from the album folders they're in?

Hi,
The article below will explain in general how your iTunes files are organized on your computer.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Hope this helps ....
- Judy

I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing!

I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing! Help!

Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
tt2

Audio files are missing in iMovie HD 6

Similar Messages

Maybe you are looking for