Audio Files Missing after sent from FCP

I'm sending a sequence to STP from FCP. There are 8 tracks of audio (4 stereo pairs). Tracks 1 & 2 have dialogue, 3,4,5 &6 have SFX and 7 & 8 have music. After sending a Multi-track project I am missing audio files on the dialogue track. The visual reference is there. The audio and video are linked in FCP but sections of dialogue are just not there.
I've repaired disc permissions, trashed preferences, ran Disk Warrior and reinstalled FCS. I'm on STP 3.0.1.
I searched the forum and was unable to find a similar situation. Any and all insight are greatly appreciated. Thank you in advance.

You have to assign tracks to a submix and then out to the master before you can hear them.
But some of the audio files are there and some of them aren't. There is no rhyme or reason for audio that appears and files that are missing. I can hear the dialogue that made it to STP from FCP, along with the SFX and the music. I've never assigned a submix to audio just to be able to hear it.
Are you on a laptop?
I've tried it on my 8 Core Mac Pro and my 2007 MBP. Same result on both. I have other sequences where everything is sent over completely. It's just this one. It is no different from any other sequence. It is all ProRes 422 and .AIFF 48khz/16 Bit
Thanks for your input.

Similar Messages

  • Audio level drop after exporting from FCP to Comp

    my dialnorm at -31db, precompressor compression setting @ none, any other setting i need to look at??

    do I need both of the audio files that ALL generates, or just the APack lookalike file?
    This is the topic of some debate.
    One camp - which I belong to - believes that you only need the A.pack lookalike (the .ac3 file). This allows you to either fit more video into your project or encode the video at a higher bit rate. Also, there is strong belief by that the inclusion of high data rate AIFF files causes many players to choke. This is the reason that gets the blame for many iDVD discs choking on players, since iDVD uses only AIFF audio for it's projects.
    The exception to the rule (for this camp) is if you're doing a music-based project - a concert, music video or karaoke DVD - where you don't want any compression of the audio.
    But, to try and answer your question directly, if you've successfully used A.Pack files in the past, you should be fine with just the .ac3 file from Compressor 2. At least, that's how I feel about it.

  • Audio device missing after wakeing from sleep modeOptions Mark as New Bookmark S

    I have an HP Pavilion a1253w. I just installed Win7 home premium 64bit. I had to do "Custom" install as I was upgrading from XP. I also had to change boot sequence to DVD drive to get it to load. (Win 7 installation disk instructed this) I tried to do the easy transfer but it was a mess. Reinstalled win7 (Didn't have to change boot sequence this time). Both times I installed win7 the sound card was not found. Just the "Unknown Device" with the yellow triangle. After windows update the device shows up and I have sound. Now (only after re-install) when the pc goes to sleep when I move the mouse nothing happens, I have to hit a key on the keyboard. When it wakes up, there is no sound card listed. When I do a restart, the sound card is there, and all works well. I know most would say "Just don't have it sleep". This is my son's PC and he always forgets to turn it off. I have external speakers hooked up the monitor is an HP vs17e it has built in speakers but I am not using them.
    Now I know there is a lot to read and take in, just trying to put as much info as possible to help you all help me.

    Nobody out there has any suggestions, opinions, or anything?

  • All clips missing after import from camcorder!

    All clips are missing after import from camcorder - Canon ZR20.  For some tapes all clips are there, for others there are none.  All the files are there in the finder, but I don't know how to have them show up in Final Cut Pro X.
    Any suggestions?

    Ok - this is frustrating.  I have been importing my old miniDV tapes again into FCPX as I wasn't able to transfer all of these projects from iMovie - don't get me started...  After importing about 7 of the tapes the first 3 came in fine, but the last 4 didn't have any clips as I said in my original posting.  Now after restarting FCPX a couple of times all of a sudden the clips are all coming in!  Strange!  Guess I'm OK now.

  • Beats audio software missing after I installed windows 8.1

     Beats audio software missing after I installed windows 8.1 
    my laptop: HP pavilion p011sv 

    Hi @Boukou ,
    Thank you for your  inquiry.
    I understand that after updating to Windows 8.1 you no longer have the Beats Audio software.
    You should be able to download an updated audio driver from HP Pavilion 15-p011sv Software & Drivers page .
    This should reinstall your Beats software.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Getting an error message trying to open a file, "Missing required parameter 'from' for method "open'. What do I do?

    Getting an error message trying to open a file, "Missing required parameter 'from' for method "open'. I've tried opening in CC and CS5. What do I do? Can the file be salvaged?

    Try opening as a copy, and/or copying the file to a new location and try opening that.

  • Where XML and related file belong when send from FCP to Color?

    Hi(Bonjour)!
    Where XML and related file belong when send from FCP to Color?
    I want to start a fresh project and delete all previous tests.
    Michel Boissonneault

    Hi(Bonjour)!
    I messed up with preference for home directory.
    Thank you.
    Michel Boissonneault

  • Audio file missing from MOV when exported as a quicktime movie.

    Using Keynote 9, I imported video into presentation that was edited in iMovie 9.  When I export the presentation to quicktime movie the audio is missing from the video file.  The audio file plays fine in the standard keynote presentation mode. 

    This is STRICTLY a work around!  Official fix will come from Apple as an update more than likely.
    Duplicate item first (File > Duplicate). On newly duplicated project change file association type (File > get info). Under name and extension section take out .key). Close Get Info and save with removing .key.  Double click to open the file (now a compression).  Open uncompressed folder (same name as original file, now shows as a folder).  Now in the Data folder find a .mov file named "Recording" with randomly generated letters and numbers behind it.  Drag .mov file to desktop or any other directory. Open extracted .mov file with QuickTime to verify integrity. Save as audio file only.  Get Info on file again and place .key value at end of file/extension for project. Open project. Under Play menu option delete the recording.   Under Audio inspector drag the .mov of audio only to recording back in. Test play project to see if its accurate.  Export to QuickTime and see if issue is resolved.
    If issue persists:
    Export with corrupted audio as QuickTime.  Separate the audio from video track.  Delete audio.  Import the extracted .mov audio file.  Share > File. Enjoy.

  • EXS 24 audio files missing from G4 to mac Pro. Export solves, but why?

    Hi. I recently upgraded from G4 DP to Mac Pro (huge jump). While some of my sample libraries work straight away...others do not, claiming "file not found" when I know they're there.
    A cure that works is to go back to the G4, load the files into EXS24 there, export them to my external drive and then run the mac pro off this. The "export" seems to be the critical step and seems to re-create the apparently missing audio files.
    It's very slow as can only do one at a time. Is there something obvious I'm missing here?
    All thoughts welcome
    Jonathan

    I have this too and I haven't been able to find any info on the net about this.
    I have no audio transitions or effects at all.  Would love to find out how to fix this.

  • How do I find audio files missing from Mainstage?

    Having downloaded mainstage additional content I find a number of wave files are missing. Example Exs24 'Full Strings Legato.exs' audio file KB-L_legato_p_A(hash)1.wav. How can I find and download them?

    I've downloaded it twice already. You can't download what is not there.

  • When a project is sent from FCP, do all mono tracks become stereo?

    It appears that when exporting a sequence from FCP, all mono tracks become stereo. Is this correct?
    I have a mono voiceover on A1, and a mono set of SFX on A2, and then some other stereo background music tracks. When sent to STP, the two mono tracks show as being stereo files, when you look at the file information, and indeed, they have two waveforms displayed in the timeline.
    Is this just the way it works?

    Interesting link, thanks for that.
    However, I have to say that was not my experience of how it ended up. I had two mono tracks, without panning, and when I sent it to STP, it ended up as 2 stereo tracks.
    I would have to experiment a bunch to try and figure out why that happened, and at this point, I think I've decided to NOT use STP and just stay in FCP, for a number of reasons. Mainly the fact that once you've done a whole bunch of effect assignment and mixing, enveloping etc. to a multitrack project in STP, there's no easy way to move a few clips around (in FCP) or tighten up some video edits without having to manually calculate frame offsets in STP, and laboriously move things around and hope they still match up. Could be I'm missing something, I only used STP for a full day...
    Maybe the update will make it better somehow.

  • My sequence will not show up in Color 1.5.3 when sent from FCP 7

    I cannot get clips from FCP 7 to show up when sent to Color. I had been able to get this to work perfectly fine earlier, but now for some reason, when sending a sequence from FCP to Color, Color doesn't automatically create a new project with the sequence in it. I've Googled for answers as much as I can, but cannot figure out what's going wrong.
    By the way, the footage is from a Canon 7D, imported into FCP from PluralEyes 8.
    EDIT: I've tried to manually export the XML from Final Cut into Color. Color will not even recognize the exported XML file. I've done what others have suggested online and deleted my Color & FCP preferences files out of my User/Library. I've created new FCP projects and tried to send to color from a new project. None of these have helped at all.

    I just had this exact same problem.  Clips from my FCP 7 sequence would not show up when I sent them to Color 1.5.  No way.  No how.
    I solved my problem (at least for now) by simply restarting my machine.  I realized that it had been running for days, and it probably just needed a reboot.  Try it.  It might work.
    And yes, I'm running Mountain Lion, too.  10.8.2.
    Good luck!  ----Todd Ruel

  • Distortion from SP when video sent from FCP

    Loops play fine when a stand alone project is open, but when I 'send' my timeline from FCP to SP, every loop played is distorted. The video plays back fine, but the distortion remains with or without imported audio, as well. Any help?
    Also, my timeline: DVCPROHD 720P at 29.97fps, 48kHz, 16-bit depth.
    Any help is appreciated. thx.
    Message was edited by: erackblack

    WOW! A new development. The clips that will not show changes come from a sequence that contains other clips that I was able to color and send back to FCP successfully. So i copied the clips that I want to color and pasted them in another sequence with some other random clips (not colored) and sent everything to Color! I did some test grading on all the clips and sent them back to FCP. The random clips that were already in that sequence reflected the changes I made in color. The clips that I pasted (the ones I need) did not reflect any changes from Color. I think the problem is within the clips. That is so weird. Anyone know what is going on?

  • Archived files missed after deletion job

    Hi All,
    We are generally doing the techinical archiving for some objects in ECC 6. Here for one object, write job & delete job is finished. but any how, archived file is missed before store job. There was some hardware failure.
    Now, we have get them restored from backup but i am not able to access the restored files from tcode SARA to store them in our storage server. It is still showing the files as failed in Store job archive file selection screen.
    I need to store those files in our storage server but archive file is not accessible from file system.
    Now, please let me know, what should i do in this case.
    Thanks in advance.
    br
    Ankit

    Hi,
    I do a little bit of Archiving using SARA, but not any expert
    We had such situations when the file was deleted from OS level while Archiving run was in progress at SARA.
    What we do in such situation is to disable the existing Run in "SARA" -> Put in Archiving Object name --> click Management, click on the failed Run and "Mark it for deletion".
    Start a new run for the same Archiving object, Keep the variant same ( I mean keep the selection dates same as earlier run) and start all over again with Write, delete, store etc.
    I dont know how much it helps
    Might be different from the scenario you might have on hand.

  • How ro export small (compressed) files (.mpg) with sound from FCP or compr.

    I have some dv pal footage that I need to store in in very small files. Then I need to convert it back to dv, for editing.
    The quality (regarding artefacts and all that) is not important. The stuff was ripped from DVDs originally and are only to be used as reference.
    Can I export an .mpg file with sound muxed into it from FCP or Compressor?
    H.264 produces to big files.
    Thanks for any replyes:)
    Message was edited by: Citizen_K

    Hm, what a weird workflow.
    I presume you are trying to edit with this stuff in FCP, so my question is, If you are grabbing media off DVDs, and converting with MPEG Streamclip or some such thing, and then trying to down-rez to edit with proxy footage, how do you plan to use timecode to reconnect to the high-res media when your cut is done?
    h.264 can produce to big files or small files, depending on the settings of the file you tell it to produce to.
    Consider that the amount of time you would spend converting media back and forth to low-res formats of lousy quality could be much more valuable than the cost of a firewire drive which you could use to convert your DVDs directly to DV, which you will find much easier to work with.
    Hope this is helpful to U

Maybe you are looking for