Audio filter problems when exporting to miniDV and as video file

I have used the DeNoiser filter on most of the audio in a 10 minute film i have made using CS4, however, when i ty and export it, either as an AVI, (or simular) or to tape, the filters arent working properly.
this happens sometimes in playback, i have to listen to the audio first before the filter works properly. if i dont it just makes the audio inaudiable the first time round.
it seems like it needs rendering, which isnt the case, and i have NO idea why it is doing this.

because it is rendered, i have clicked on "sequence -> render audio" and nothign happens, it just plays through like it would once it has finished rendring.
like i said, it plays fine in playback, most of the time, just not after it has been exported

Similar Messages

Audio sync problem when exporting between FCP6 and Soundtrack

Hi, I'm a newbie to this so apologies for any glaring errors.
I've recently upgraded to FC studio 2 and have exported the audio of an existing 20 minute custom format quicktime project (720x408, 30fps,) to soundtrack for sweetening.
Trouble is, when returning the audio back to FCP, the audio is shorter by several seconds and therefor totally out of sync! I've also tried outputting the multitrack audio from within FCP and bringing it back in as a single file and this is also out by several seconds. The output settings are the same as the project.
If I do nothing to the audio and simply send it to compressor; the M2v and it's aiff play in sync in Quicktime.
Any ideas or work arounds?
Thanks in advance for any advice.

Check you have the very latest version of QuickTime (7.7.1 at time of writing): QuickTime 7.7.1 for Windows
Cheers,
Neale
Insanity is hereditary, you get it from your children

Final Cut Pro Audio Levels Low when exporting to mp3 and mp4

Hi everyone! When I export audio from Final Cut as an mp3, my levels are very low. When I export footage as an mp4, the audio is low as well. But before exporting, my levels are right at or below 0. So they are where they should be. So for example, when I open the audio in Adobe Audion or Logic, they could almost be doubled before peaking within those programs. Could this be a compression issue? And input would be helpful. Thanks!

Are you working 0n 10.0.9? If not, update FCPX and see whether that solves the problem.
Russ

Aspect ratio problems when exporting from FCP and creating DVDs

Hi there
Can anyone help? I'm using FCP to edit material shot using a Sony z1 in SD 16:9 mode. My media displayed correctly in FCP with the 'anamorphic' option ticked in the browser.
I then exported my short films as QuickTime movies and created a DVD in iDVD using those video assets.
When I then viewed the films on a widescreen tv, the films did not display at the correct aspect ratio. They were horizontally elongated, as though they had been stretched twice over, so that objects, people and text appeared fatter than they should.
Can anyone let me know whether there are any settings I could change in either FCP or iDVD to stop this happening?
Many thanks!
Jacqui

this thread may help
http://discussions.apple.com/thread.jspa?messageID=7422463

Premiere Elements 8: Audio sync problem when exporting to Quicktime H.264

Program plays back fine on the timeline also when saved as a mpeg file. QT file audio sync is off. Using QT player to play back. Any thoughts?

Check you have the very latest version of QuickTime (7.7.1 at time of writing): QuickTime 7.7.1 for Windows
Cheers,
Neale
Insanity is hereditary, you get it from your children

Problem with audio sample rate when exporting

I am having an issue with my audio sample rate. For some reason it is set at 8 khz by defualt when I am exporting. This was not an issue until the latest update (2 weeks ago). I'll try and give all the info I can up front. Also I tried customer support...that was a nightmare.
Ok the issue I am addressing is that the audio sample rate when exporting is at 8khz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to h.264 it insists on resetting to 8khz. Even if I manually set everything look at the render queue and click on output module again it changes the sample rate back to 8 khz automatically which I must adjust again. Why can it not just be set at 48000 like every other adobe product is and like it used to be two weeks ago. Does anybody have an answer?

This problem is addressed by the After Effects CC (12.2.1) bug-fix update, which is now available:
http://adobe.ly/AE_CC_1221
Note the part at the end of that page about a crucial update for the Creative Cloud desktop application, which addresses some severe problems with AME, Premiere Pro, and After Effects.

Major "BUG" in Imovie 9 - Audio Sync Problem on Export !

Well I'm a hard-core Apple user from day one, but unfortunately today I'm not to proud about the latest version of Imovie 9.
It seems there has been a "MAJOR audio sync problem on export" in Imovie 9, since July 2009. Apple knows about this bug for a long time now, but didn't release any bugfix yet!
Here's what it's all about:
It seems if you use the (custom /manual) speed-adjustments and not the preset slider speeds, you will experience (after exporting your movie) annoying bursts of audio from clips that had been set to mude. The strange thing is that you will only experience this audio-bug after exporting, you will NOT experience it in the project playback mode!
Here's what you can do:
Find ALL the clips in your Project that are Speed Adjusted.
Instead of using a "Custom Speed" percentage, use any of the "Preset Speeds"
Preset Speeds on the Slider = 12.5%, 25%, 50%, 100%, 200%, 400%, 800%
Then, export your project as usual.
No more sync issues.
Really hope That Apple will come up with a real BUGFIX soon.
It's a shame that a major bug in a otherwise GREAT PRODUCT, hasen't been fixed yet!
What's wrong with Apple?...this is not one of their finest hours.
Still A BIG fan from Imovie HD,...I'll chance to Imovie 9 when the bugs are finaly fixed!

This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

Having problems when exporting .swf file as an animated gif

Hi:
I was wondering if anyone has ever had any issues exporting a
flash file as an animated gif? When I do so, the image quality is
very compromised and the animation is distorted. I know this is not
very specific question, but I have never encountered this issue
before, and I am trying to help a co-worker. I don't understand why
it looks exactly the way we want it to look as an swf file, but not
as an animated gif? Can anyone point me in the right direction as
to what to look for as the potential source of this problem? I have
the swf file, although this would not be very helpful as I don't
have access to the flash file (but I can send it to you if that
would help). We tried unchecking the feature to optimize the image,
and changed the color pallete to adaptive, but this didn't solve
the problem. I also tried removing any unnecessary layers prior to
the export. Basically, I'm not sure as to how to proceed and what
may be causing the problem. I also want to mention there is a
placed image on the stage. Could the type of image placed be
causing the problem when exporting to a gif file, but not as a
.swf? If anyone could help, I would really appreciate it! Thanks.
Sara

I also wanted to mention that the swf file uses sound. I am
reading an old book that I have on Flash and it's saying that Flash
and Shockwave Flash enter a special mode when they encounter a
stream sound in which the animation is forced to keep up with the
sound track, if the animation frames can not be drawn quickly
enough, some frames are skipped. I am also reading that the
animated gif format does not support sound. Again, the only
reference I have is for a very old version of flash, and I'm not
sure it applies to CS3. I am now just thinking that the sound may
be the issue.

Hyperlink problem when exporting to PDF

We are using Crystal Reports XI R2 and having a problem when exporting a report to PDF that contains a Hyperlink to "A File". The hyperlink works correctly when previewed inside Crystal but when it is exported to a PDF the text does not appear to show any hyperlink at all. Am I missing something or is this a bug?

Hi Brian
Please visit the following URLs that talk about the issue.
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014557&sliceId=&dialogID=25464253&stateId=1%200%2025430948
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014405&sliceId=&dialogID=25464259&stateId=1%200%2025430949
You can also download the CR XI R2 Service Pack 4 by using the following URL and check for the results.
- https://websmp208.sap-ag.de/bosap-supportsw
- Then choose Crystal Reports from 'Software Products' dropdownlist,XI Release 2 from 'Product Version' dropdownlist and service packs from 'Software Types' dropdownlist.

Problem when exporting Universe to Enterprise

Hi All,
I am facing problem when exporting universe to enterprise. I am getting the following error.
"You do not have the right to add objects to the folder /webi universes" .
1) I tried logging with admin account still getting the same error.
2) I tried adding my user id to admin group but still has the same problem.
I did not make any new changes to security. Do not know what might be the reason. Any ideas would be greatly appreciated.
Environment: BOXI 3.1, windows server 2003.
Thanks and Regards
Sudharsan.

Hi Prasanna,
1) I checked the rights on universes for Administartors and Everyone for webi universes folder :
Universe Security:
      a) Administartors: Private
      b) Everyone has public.
User Securtiy:
      a) Administrator : has full access
      b) Everyone : No access
2) I tried adding my user id to admin group and exported it, but no luck. I also brought a new user into the system (thinking that i might have some restrictions some where) and added him to admin group and tried with his user id too but still has same problem.
Thanks
Sudharsan.

Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8% before this happens any idea how to fix I have a movie deadline to meet!

Hi all,
Finished editing a short movie.
Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
thanks
Louis B

Thanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
Just to clarify points for people out there with the same issue:
First steps
- Ensure background rendering is turned off in preferences
- Delete project and events render files
- If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
Next Steps
I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
Then we tried export again this time to a master file with some settings detailed by Apple.
The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
best wishes,
Louis B

AUDIO CLIPPING/DESTROYED WHEN EXPORTED TO QUICKTIME

Hi folks! Does Bob need your help today!
I am working on a sequence in Final Cut Pro. When I play it in the timeline, the audio sounds fine. However, when I export it to Quicktime, it is a lot louder and the audio clips like crazy (distorts/sounds destroyed). I am really in trouble here and just can't figure it out. I'm going nuts! All I want is to have what I have in the timeline exported as it is.
Some details to help you help me:
- although it sounds good when played in the timeline, the audio does stray into the red. I don't see why this should matter since it sounds fine in the timeline - this is all I want when exporting.
- I have one video track and several audio tracks.
To all who do, thanks so much for helping me.

Going into the red with digital audio is not the same as when it happens with analog audio.
With digital sound the signal is being truncated and as you remarked, quite literally being destroyed.
Redlining analog audio, is introducing distortion but there is still "headroom" and in reasonable doses it can give you a nice fuzzy feeling.
Bottom line -don't let your digital audio signal go into the red.
Have a look at the keyword searchable, Final Cut Pro User Manual in FCP's Help menu bar item, where this is explained in more detail.
Your search term for the day "Audio Levels, Meters, and Output Channels".

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

I have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

i have a problem when ı want to update and restore my ipad for ios5 : an error occurred while restoring this ipad (-10), what can i do??

Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
This one comes close:
The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

I am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error

i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = kull )
my database name is kull
please somebody help

Biswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database".   I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias                     lsn
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                05-JUL-2013 19:08:06
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

Audio filter problems when exporting to miniDV and as video file

Similar Messages

Maybe you are looking for