Audio filter(s)/adjustments to deepen voice...?

What audio filter(s) - and what adjustments- would be recommended to deepen someone's voice? Can't seem to find here or in Soundtrack discussions...
Thanks!

Well... microphone technique is the first place to start, but if a person sounds like Shirley Temple, it's pretty hard to get Orson Welles out of it.
you might try a harmonizer, which drops pitch without changing speed.

Similar Messages

  • Audio Filter to deepen voice

    Hello all,
    I was wondering if anyone can recommend a good filter to use to deepen a voice? I've tried the different filters in FCP, and cannot seem to get what I'm looking for. Does anyone have any suggestions?
    Thanks in advance..

    To deepen the voice without changing pitch or speed, I'd recommend using an EQ filter and boosting the lower frequencies while cutting the higher frequencies. A Low-Pass and/or High Cut filter may do the same thing.
    -DH

  • Best audio filter for heavy wind noise ?

    Hello everyone
    I'd like to know what is the most used audio filter in order to recuce a heavy wind noise without affecting the voices of a conversation in my movie ?
    Thanks

    I don't know what people use, but I've always been told that the best way to get good audio is to get it right the first time. Since I'm no sound guy, I struggle to get anything to sound good.
    Export your offending Audio to .aiff and pull it into SoundTrack. Go to your Effects on the middle left of your screen and pick SoundTrack Pro>Channel EQ. Drag this into the area under your Effects bin. Then start playing your sound while adjusting the Advanced Dialog.
    You can tweak different frequencies and try to pull out the wind. However, wind often is around the same range as voices, so it's going to cause some distortion.
    Beyond this, if the wind was really bad it will have caused "popping" that will have mutilated any talking at that moment.
    Can you do any looping/re-record the voices? That may be your best bet.
    I'm hoping some sound guy comes here and sets me straight and helps you out. Perhaps check the SoundTrack forums....
    I'm sorry I'm not more help.
    ~Luke

  • Which FCE audio filter do i use??????

           I have a recorded voice over a video in FCE. I am trying to make it look like the person is talking to themself (in there head of course). Does any have any suggestions on which audio filter to use, i was thinking maybe a slight echo and a dreamy voice (not afraid to over do it).

    Well, not sure, if this works for you...?  Try Echo and AUPitch...

  • What Audio filter to use

    I just transferred some VHS tapes into FCP and what to adjust the audio. Most of the men voices seem to deep/"basey" (can't think of a better word). I guess I'm looking for a audio filter that would adust the base or treble? Thanks for your help. Loran
    G5 dual 2.5   Mac OS X (10.4.8)   FCP 5.1.2

    Hello, thanks for the suggestion. I looked at it and there are at least 25 to 30 sliders. Which ones would you use to make low pitch voices into higher ones.
    Thanks
    Loran

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • Audio Filter missing:  Internal Volume Stereo - corrupt project?

    Hi,
    I am getting this error when I open my project. In addition, no media will play in the project either in the sequence window or the source window.
    It all appears and will scrub (with no audio), but will not play.
    I dug around a bit and I found that there is a known bug with audio from XML's and that is what I am using (convinced my client to migrate from FCP to Premiere - please don't tell me I made a mistake).
    Everything worked brilliantly for a week, including the addition of audio filters, and then all of a sudden - bang. No more.
    I have painstakingly deleted every audio filter and I am still getting this error. I have also tried a re-install.
    Another oddity is that when I try to quit Premiere, it will not quit all the way without a force quit!
    I'm running CC 2014 on a brand new mac pro.
    Desperate,
    dw

    Steve and Bill,
    I follow your advice, but it did not solve the problem. It is true  that  problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
    In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
    1. "Audio Filter missing: Internal Balance".
    2. "Audio Filter missing: Internal Volume Stereo".
    3. "This type of file is not supported or required codec is not installed".
    In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
    Some projects can be opened, but when I try to Playback  there is no sound.
    I am completly lost. Please help.
    Andrew

  • What kind of audio filter would i use.

    i need an audio filter that will bring out a distant clapping noise thats you cant even hear during playback. i have raised the dB as high as possible. is there a way to get it heard at all?

    Just be aware, that if the audio is very slight and you raise the level .. you will also raise the levels of any surrounding room noise, etc ... so you will get a lot of hiss and maybe even echo. You can also double up the clip to increase the volume but I doubt you would be left with anything useful
    Been there, done that, cursed the cameraman

  • Premiere Audio Filter Issues

    So I've finished my project, applied audio filters (Denoiser) to get rid of the hissing sound. Worked flawlessly. Sounds great in my project, but once exported the hissing returns at the begining of each new audio clip. The sound gets perfect again after a second or two but reverts to the pre-filter sound each time a new clip comes in.
    So is there a fade in-out for the audio filter? I can't find one (and why would one want one). Doesn't matter how I export, to any file type, always the same, brief original audio which gently fades back to the perfect-filtered audio.
    Again, sounds perfect all the way through in my project, but not after rendering. Any ideas?

    This is a known issue with certain audio filters in PP.  The recommended solution is to process those audio files in Audition instead.
    And do file a bug report.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • What's the best audio filter and settings to eliminate echo?

    I shot an interview in a hallway. What's the best audio filter and settings to reduce/eliminate echo?

    There isn't one. You will be trying to remove the same frequencies as those you want to keep.
    Reshoot it, strategically position some heavy drapes and use close miking such as a lav and reliable monitoring quality headphones.

  • Audio Filter missing . . .

    I have experienced a number of crashes (iMac OS 10.75) in my Premiere Pro project + the warning "Audio Filter missing: Internal Volume Mono"  How do I resolve this?  It seems to be a 'project' problem.
    Thanks for your help.
    Nola
    Message was edited by: Nola Schiff

    I wish I could supply some help; I am having the same problem (newest version of Premiere Pro CC, just reinstalled in hopes of solving this problem, on a Macbook Pro i7 running 10.8.4 with 16GB RAM. It is rendering my project unusable. Help anyone?

  • Audio Filter missing:  Internal Volume Mono

    All of a sudden this error message started popping up
    Audio Filter missing:  4:1635083896 1278365011 1802721110  Audio Filter missing:  Internal Volume Mono
    Also now my timeline is not working, some tracks are missing volume envelopes and when I scroll up and down it's all messed up and I can't do anything.
    What's happening?
    I tried re-installing the latest update CC 2014.1 but no go...
    Help!!

    OH man, Im also having loads of other audio issues with this update. Clicks, pops, audio often mutes on it's own. No audio comes through and there's screeching huge noise...ng
    Really disappointed with this! Im paying good money for the CC and today alone Ive spent 4 hours trying to figure out these massive issues.
    Im using multiband compressor and EQ and the instant I add those to the timeline the troubles begin.

  • Audio Filter missing:Internal volume stereo

    I am unable to back play a Pre project I am working on in the moment. When I open it, there is a message as in the subject of this post (Audio Filter missing: Internal volume stereo). Can someone help please.
    Andrew

    Steve and Bill,
    I follow your advice, but it did not solve the problem. It is true  that  problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
    In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
    1. "Audio Filter missing: Internal Balance".
    2. "Audio Filter missing: Internal Volume Stereo".
    3. "This type of file is not supported or required codec is not installed".
    In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
    Some projects can be opened, but when I try to Playback  there is no sound.
    I am completly lost. Please help.
    Andrew

  • I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC I am getting this error whenever I try to play its file type on my MacBook Pro,"The document "VN622195.WMA" could not be opened. The movie's file format isn't recognized."

    I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC
    I am getting this error whenever I try to play its file type on my MacBook Pro,"The document “VN622195.WMA” could not be opened. The movie's file format isn't recognized."

    The mac has no native way to read .wma files (these are Windows Media Audio files).  Do a search on the internet for playing wma files on a mac.  You will find several links to solution (one is to use flip4mac).

  • *** Audio filter to boost low volume?

    I have a clip that was recorded at too low of a volume. I would like to now augment this in post. Is there an audio filter that I could apply in FCP that would increase the speaking parts and at the same time reduce the hiss?
    Thanks in advance!

    The Dynamic Processor filter can increase volume, but sometimes it's quicker and easier to just duplicate the track [Shift Option drag]. For reducing the hiss I'd recommend the noise reduction process in SoundTrack Pro or applying an EQ filter and reduce the frequencies of the hiss.
    -DH

Maybe you are looking for

  • Import Data (Aggregate Storage) -Load data parallel

    I am using the following maxl: import database 'app'.'db' data connect as 'xxx' identified by 'xxxac' using multiple rules_file 'L_Lo_1','L_Lo_2','L_Lo_3','L_Lo_All' to load_buffer_block starting with buffer_id 100 on error to 'C:\dataload.err'; I am

  • Addressing an email in Mavericks

    After updating to Mavericks, I found that when I went to type in the person's name in the To: that I would press return after putting in their name and would get a double addressing. In other words, their name would enter twice. I don't know how to s

  • Disk manager window 2003 stop or server reboot under 11g cluster

    Hi i have a simple question, since we pass to 64-bit window 2003 our cluster (32-bit before). The disk manager service under window stop after 3 to 4 days. At this moment, Oracle stop (ASM do not have any more disk to access). Some time the server re

  • Numbers, moving a chart to another sheet

    I need to move a chart to another numbers sheet. Using copy or cut and paste seems to get most of it done, but it makes  copies of the chart into a bunch of individual cells! Thanks for your help.

  • Firefox downloads a large jpg file again, even if its open in a seperate tab already.

    When I click on a link to open a large jpg file in a new tab, it works fine. When I Right Click to save the image, firefox starts the complete download again, which takes time. It ideally should not download again. The picture has already been downlo