Audio fine in PSE9 but not in Premiere Elements 9

When I create a slide show in PSE9  I intermix photos and short movies. The movies have audio tracks. I  then add different audio to the slide show, ending the audio before each movie and  then placing a new audio after the movie. It plays exactly as I have set it up when I play the slide show in PSE9. When I send the slide show to  Premiere Elements 9 to create a DVD, the audio I have ended in PSE9  continues through the movie giving me dual audio during the display of  the movie and making it difficult/impossible to hear the audio for the  movie clip.
I want my PSE9 slide show to be exactly duplicated by Premiere Elements 9. Why doesn't it do this?

Yes, I created my slide show in PSE9 using the Organizer.
I am able to import a video clip (taken on a digital camera) exactly the same as I can import a still picture. The clip needs to be in an allowed format. First I end the audio I am using for the rest of the slide show 1 or 2 slides before the video clip. Then I place a new audio a slide or 2 after the video clip. It plays back exactly as I want it to in the Organizer slide show. However, when transferred to Premiere Elements 9 to create a VDVD, the audio doesn't end before the video clip - both audios play when the video clip plays creating a cacophony!

Similar Messages

  • How do I get the audio playback from the source monitor to work? I have the trial version of the latest premiere and the audio works in that but not cs6

    I have the trial version of the latest premiere and the audio works in that but not cs6

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -especially your sound hardware, and the details of your video

  • Dreamweaver text looks fine in Safari but not Firefox NEED HELP!!!

    Dreamweaver text looks fine in Safari but not Firefox, all my text goes out of alignment and the fonts look like different sizes. Please let me know your thoughts. Here is a link to the page I'm having problems with. http://www.alexandrasantibanez.com/bio.html

    I had the same problem for days what a waste of time trying
    to figure out code... the code was fine. I was running flash player
    7.0 Upgrade your flash plugin to 9.0 and it should work fine in
    Firefox and IE. It did for me.

  • A javaScript code that runs fine in IE but not in other plz help

    Hello friends,
    plese help me in getting the code for Opera and Mozilla browsers. The following code runs fine in IE but not in other browsers. it show titlebar in other browsers. What to do disable titlebar in other browsers? plz help
    <html>
    <head>
    <script>
    //Frameless Banner Popup
    // Set the url of the banner popup window page
    //var theURL = "index.htm";
    var theURL = "/cgi-bin/login";
    // Set the title of the popup window
    var title = "Login"
    // Set the size of the popup window
    var windowWidth = 350; // cannot be less than 100
    var windowHeight = 350; // cannot be less than 100
    //var windowWidth = window.screen.width; // cannot be less than 100
    //var windowHeight = window.screen.height; // cannot be less than 100
    // Set the position of the popup window
    var windowX = ((window.screen.width/2) - 175);
    var windowY = ((window.screen.height/2) - 175);
    // Set true to auto-center (positions will be ignored)
    var autocenter = false;
    // Set true for popup to close when launch page does
    var autoclose = false;
    var s="width="+windowWidth+",height="+windowHeight;
    var beIE=document.all?true:false;
    var done=new Object("no");
    if(autocenter){
    windowX = (window.screen.width-windowWidth)/2;
    windowY = (window.screen.height-windowHeight)/2;
    function doAgilePopup(){
    if (beIE){
    agilePopper = window.open("","popAgile","fullscreen,"+s);
    agilePopper.blur();
    window.focus();
    agilePopper.resizeTo(windowWidth,windowHeight);
    agilePopper.moveTo(windowX,windowY);
    var frameString=""+
    "<html>"+
    "<head>"+
    "<title>"+title+"</title>"+
    "</head>"+
    "<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
    "<frame name='top' src='"+theURL+"' scrolling=no>"+
    "<frame name='bottom' src='about:blank' scrolling='no'>"+
    "</frameset>"+
    "</html>"
    agilePopper.document.open();
    agilePopper.document.write(frameString);
    agilePopper.document.close();
    }else{
    agilePopper=window.open(theURL,"popAgile","scrollbars=no,"+s);
    agilePopper.blur();
    window.focus();
    agilePopper.resizeTo(windowWidth,windowHeight);
    agilePopper.moveTo(windowX,windowY);
    agilePopper.blur();
    if (autoclose){
    window.onunload = function(){agilePopper.close();}
    done="okay";
    </script>
    </head>
    <BODY onLoad="doAgilePopup(),top.window.close()">
    </body>
    </html>

    missing semicolon in end of the variable frameString ,
    better write the string in single line thats easy to find the bugs like this.
    var frameString=""+
    "<html>"+
    "<head>"+
    "<title>"+title+"</title>"+
    "</head>"+
    "<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
    "<frame name='top' src='"+theURL+"' scrolling=no>"+
    "<frame name='bottom' src='about:blank' scrolling='no'>"+
    "</frameset>"+
    "</html>"

  • Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

    Learning with Lynda.com!
    Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
    I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
    I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
    Thanks!

    Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

  • Fixed headers while scrolling works fine in bids but not when deployed to reportserver

    Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
    Thanks in advance...............
    Ione

    Hi ione721,
    Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
    View in Internet Explorer 9 by following steps:
    When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
    When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • HT5517 I am using apple tv to connect slingbox to tv via iphone.  I get the audio to the tv but not the video.

    I am using apple tv to send slingbox picture from iphone to tv.  I get the audio to the tv but not the video.  What setting am I missing?
    Thanks

    Why is a slingbox needed?
    Connect the ATV directly to the tv.
    Keep in mind that all not all apps on iOS device allow sending of video via AirPlay to the ATV.
    Also, AirPlay does not require or have anything to do with slingbox, it is entirely iDevice to ATV.

  • Why is it I can drag audio in landscape orientation but not in portrait orientation?

    Why is it I can drag audio in landscape orientation but not in portrait orientation?

    Because landscape is the default layout mode.
    Portrait, which is book--optional, is for editing already added content, basically.
    Get your audio in and then test to learn how elements operate, and see Publishing With iBooks Author
    http://shop.oreilly.com/product/0636920025597.do 

  • I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

    I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

    goldstein
    Please define what you mean by
    I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.
    Can you not install the program? If you cannot, how are you installing it, from an installation disc or installation files from Adobe? Are you looking at the tryout or a purchased product? At what stage of the installation are you blocked and with what messages? Do you have the anti-virus and firewalls turned off? Do you have another other computer protective software installed such as NetNanny?
    If you are getting through the installation OK, are you able to Sign In after the installation and restart of the computer?
    If you get into the opened project, when does the problem first manifest itself? Is the problem in a new project or in an existing one?
    Is the problem in one of the editing features?
    Is the problem in one of the export choices?
    Other?
    The answers will be in the details which allow us to help you.
    Thanks.
    ATR

  • Interpret Footage works fine in pre8 but NOT pre9

    I use pre8 at work - use Interpret Footage all the time to Conform to - PAL widescreen. It works fine. No problems.
    I have just purchased pre9 for use at home. Interpret Footage does NOT work. The video fails and the audio fails. Not good. Problem.
    I am using the exact same footage, camera, project settings etc.
    Any suggestions would be appreciated. Thank you.

    Brainforest
    I suspect that your issue has nothing to do with your video footage, camcorder, but everything to do with a glitch in the Premiere Elements 9.0/9.0.1 Interpret Footage feature.It is not a fatal glitch unless you overlook what is happening. I will describe it, and let us see if this is the cause of your issue.
    Let us say that I have Premiere Elements 9.0/9.0.1 with a video file on the Timeline, frame rate 29.97 frames per second and maybe Pixel Aspect Ratio = Square Pixels. The choices are not important. It is what happens in trying to change anything like these in Interpret Footage Premiere Elements 9.0/9.0.1. For now let us say that you want to change just the Pixel Aspect Ratio to something else.
    a. I right click the video file in Project Media View, select Interpret Footage from the menu.
    b. In the Interpret Footage dialog, I go to Pixel Aspect Ratio and change it from Square Pixels to something else. Then I click OK.
    c. Then, when I resume operation in the workspace, the Pixel Aspect Ratio will be Square Pixels, BUT the frame rate will be 1.00 instead of 29.97.
    Whether or not you are going to change the Frame Rate there, you need to select and type in the desired frame rate in the field where it says "Assume the frame rate ___"
    In my case, even though I did not alter "Frame Rate from File" = 29.97, the typing cursor jumps to the Assume this frame rate field ____ when you open the Interpret Footage dialog. If you are changing the frame rate anyway, you would never know the problem. But, when you are only changing the Pixel Aspect Ratio, often this glitch goes unnoticed.
    Bottom line: In your PAL system, if the file frame rate is 25 frames per second and you want to change just the Pixel Aspect Ratio in Premiere Elements 9.0/9.0.1, be sure to type in 25 in the field for Assume this frame rate to prevent the result of 1.00 frames per second.
    Please check this out and see if this is happening in your case.
    Thanks.
    ATR

  • Why is audio fine on export but video is white?

    Hey all, I'm brand new to the forum but I need a little help.
    I am doing some editing work from home for a website. The clips I am receiving are coming in mp4 compressed. The clips need to go into Avid Media Composer running on pc windowsXP in 720p project. The mp4s are around 800mb each full 1 hour shows compressed. When injested into Avid clips obviously look horrible. I was told to take into quicktime then export w/ DVCpro/NTSC codec which is the native codec to the pre-compressed clips. When I used the settings given I get fine audio but video is all WHITE. Export is fine w/ any other settings but DVCpro. I was told to try perian codecs download but I was having trouble finding a PC version.
    Any thoughts, ideas? Any help would be very appreciated!

    Hello,
    I am having the same problem. Yesterday I could hear only audio without video picture but today, I can not watch videos even on apple page. It offers to open video with divix. I tried to unnistall quick time player by moving it to the trash, I know now that was bad idea. After that, I uploaded quick time player 7 but nothing happens. I appreciate any help.
    Thanks

  • Air play gives audio from itunes (sometimes) but not browser

    Apple TV used to work fine from all devices on all apps/browsers.  Now I get video but not audio from my Firefox browser via Air Play & if the settings are just right then I can get audio from iTunes ONLY.  HELP!

    UPDATE:
    Well, the nice folks at AJA were kind enough to send another card out.
    It just arrived today. I swapped it out with the older card, and then -  - - - - the problems still persist.
    The computer revved up into turbo mode, and there are still a few glitchy things happening with some basic functions in OSX. (I even did a re-install before putting the new card in).
    Checked / updated the firmware / etc.
    Starting to think this is a MAC issue, but dont' know how to proceed.
    Thanks so much for the help already, but I'd sure love to see this problem resolved once and for all somehow...
    Ideas?

  • Calculations that work in After Effects but not in Premiere Pro

    I'm developing another Premiere Pro plugin based on AE effects SDK.
    The plugin manipulates pixels in a very simple way - based on lift/gamma/gain controls it changes the values as such:
    colorRGB->blue = PF_POW( colorRGB->blue , gamma) * gain + lift
    And so on for the red, and green. All in floating point, PF_FpShort. I even tried doing calculations in PF_FpLong, but the results were the same.
    Later the values can be clipped using MAX and MIN macros.
    In After Effects everything works perfectly. In Premiere Pro, once certain gamma treshold (less than about 0.5, more than about 1.4) is reached, I start getting weird artifacts. Either green pixels or black squares in random patterns, usually, but not always, corresponding to the darker parts of the image.
    I have no idea why, and how to correct it.
    Please help.
    EDIT: Actually any gamma that is different than 1 results in these weird artifacts, and only in the BGRA_32f mode. BGRA_8u works fine.

    I have applied the procamp, and I am even more convinced that this must be some kind of a bug with the blue channel.
    All other channels handled negative and positive values out of [0,1] range perfectly - reducing brightness in the procamp, and bringing it back in my filter works fine. Of course, all the data in the blue channel is already lost by clamping it on the input.
    Which is the reason I would not want to clamp the blue channel on input, and proceed with the calculations. But so far  I have not figured out how to do it.
    EDIT: Stranger and stranger...
    If I clamp the assignment to the proxy pixel, it works fine:
    colorRGB->blue = MAX (0, inP->blue);
    But if I clamp just the value in the PF_POW macro like this:
    colorRGB->blue = PF_POW (MAX (0,inP->blue), gamma.blue ) ;
    or like tis
    colorRGB->blue = PF_POW (MAX (0,colorRGB->blue), gamma.blue ) ;
    It doesn't. It also doesn't work with pow() function from math.h, and it also doesn't work if I clamp the PF_POW from the outside like this:
    colorRGB->blue = MAX( 0 , PF_POW (colorRGB->blue, gamma.blue ) );

  • ITunes/Apple Mobile Device works fine w/iPod but not iPad

    Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
    EDIT:
    Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

    The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
    Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
    Are you able to restart the service after following the steps in that article?

  • Disc playing fine on DVD, but not MacBook Pro

    Hello - I have authored and burned discs, and they all play fine on my DVD player on my TV set, but are not playing on my MacBook Pro. I put the disc in after Disk Utility shows it's been burned successfully, and after a few 'tries', it pops out, never even mounting on the computer. Might there be a 'fix' for this? Thanks so much...

    I would start to troubleshoot by trying a commercial (rented or purchased) DVD and make sure it's not the drive itself. It would be strange for a DVD to work in a set top box but not your computer, it's usually the other way around.
    And did you really mean to post this in the Final Cut forum?

Maybe you are looking for