Audio for Hobbit movie not working consistently in iTunes update

I purchased the recently released Hobbit Exended Edition shortly after updating my itunes player, but I only seem to get 13 minutes of uninterrupted play before the video and audio breaks up, and then the audio just stops working completely. Then I tried pausing the movie and resuming play to see if it fixed anything, but the audio would work for a second before dropping out completely again. I tried re-downloading the movie, but the problem still persists. Is there a way to fix this?

For additonal info: I tried watching other movies in my library, (The Hobbit (theatrical release) and The Avengers), and they also had problems with the audio dropping out in a matter of seconds.

Similar Messages

  • Exporting Sequence Timecode for QT Movie - Not Working!

    Hello,
    I need to export a film I have been working on to a Quicktime file, but I need the QT film to keep the timecode in the sequence I have been working on. The film is going to a broadcaster in the UK, so I need the film to start at 10:00:00:00, with countdown leaders/colour bars appearing beforehand etc.
    I have been trying to export a normal, self contained QT file (not using QT conversion) but every time I do, the QT film has a starting timecode of 0:00. I have adjusted the sequence settings so the timecode is appearing as it should in the FCP sequence. Am I doing something wrong or have I missed a step? Any help would be greatly appreciated!!
    George
    P.S. I can export to tape also, which I tried, again with no luck (TC starting at 0 again!) If any of you know of a method to export to tape while keeping the sequence TC please let me know!

    I'm using Final Cut Pro 7.0.2.
    I'm checking the timecode of the exported file both by looking at the timeline at the bottom of the QT movie and by viewing the movie properties on QT. Both the video and audio tracks start at 0:00:00.
    They haven't asked for burnt in TC (this means actually having a timecode display burnt onto the film itself right?). They they just want the film as either a data file or printed to tape with the timecode settings they specified. So far I have been unable to do either.

  • Code for flash movie not working?

    ok, I have searched hi and low for this and found lots of great info from Wyodor on this forum but I just cannot get this to work! I have tried the code, replaced the paths and sizes relative, I have everything (swf flv) in the same directory on my server (not mobileme) but still nothing. All I see when I visit site is a grey box. What am I missing? It seems pretty straight forward. Please help! Thank you

    The URL appears in two places in the code. The most important one is after
    <embed src=
    Enter the URL to your flash file into the browser and it should play full screen on a page of its own if it is correct.
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
    codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve rsion=6,0,40,0"
    width="640" height="480"
    id="MovieName">
    <param name="movie" 
    value="http://www.mywebsite.com/FlashFolder/FlashFile.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#ffffff" />
    <embed src="http://www.mywebsite.com/FlashFolder/FlashFile.swf" quality="high" bgcolor="#ffffff"
    width="640" height="480"
    name="MovieName" align="" type="application/x-shockwave-flash"
    pluginspage="http://www.macromedia.com/go/getflashplayer">
    </embed>
    </object>

  • 'Export audio to movie' not working properly

    Hi, when I 'export audio to movie' in Linear PCM format the audio from the original video plays along side the music I have written in Logic X. The audio track from the video is muted apart from where I've used some of the original audio on a new track. How do I get it so that just my music plays along with the video?
    Thanks,
    Jonny H

    Hi Anton
    This is a known bug in Logic on the intel macs. We're all hoping this will be fixed in the next version!
    There are a few workarounds...
    bounce the audio for your movie. Open it in Quicktime pro. Open the movie in QT pro and you can join the movie and audio with a bit of trial and error.
    Easier perhaps, is to use imovie to import the movie and audio separately and then export the movie from there. That's what i normally do.
    As i said, it's a workaround - but it's better than nothing!
    Hope that helps
    Rounik

  • Wifi with stock kernel driver rtl8192ce not working consistently

    Hi,
    My wifi card RTL8188CE does not work consistently with kernel driver rlt8192ce. The problem that i observe is that after some time ~1hr wifi devices get disconnected and are not able to reconnect. On restarting wifi using systemctl restart hostapd sometimes the system hangs.
    Here are the outputs.
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    Subsystem: ASUSTeK Computer Inc. Device 84b5
    Kernel driver in use: rtl8192ce
    Kernel modules: rtl8192ce
    Logs
    Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:56 Blitz-4 kernel: [color=red]rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)[/color]
    Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:56 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
    Jan 22 19:30:56 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
    Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:57 Blitz-4 kernel: rtl8192ce 0000:05:00.0: swiotlb buffer is full (sz: 105 bytes)
    Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:05:00.0
    Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:57 Blitz-4 kernel: DMA: Out of SW-IOMMU space for 105 bytes at device 0000:05:00.0
    Jan 22 19:30:58 Blitz-4 kernel: BUG: unable to handle kernel paging request at 000060240000801d
    Jan 22 19:30:58 Blitz-4 kernel: IP: [<ffffffff811b29a6>] __kmalloc+0x86/0x1c0
    Jan 22 19:30:58 Blitz-4 kernel: PGD 0
    Jan 22 19:30:58 Blitz-4 kernel: Oops: 0000 [#1] PREEMPT SMP
    Jan 22 19:30:58 Blitz-4 kernel: Modules linked in: nls_iso8859_1 nls_cp437 vfat fat ctr ccm fuse bridge stp llc snd_hda_codec_hdmi arc4 mousedev hid_generic coretemp hwmon ppdev intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel rtl8192ce rtl_pci rtl8192c_common rtlwifi kvm mac80211 crct10dif_pclmul crc32_pclmul evdev crc32c_intel mac_hid uas ghash_clmulni_intel usb_storage usbhid cfg80211 hid snd_hda_codec_realtek snd_hda_codec_generic i915 aesni_intel iTCO_wdt iTCO_vendor_support aes_x86_64 lrw snd_hda_intel gf128mul drm_kms_helper rfkill snd_hda_controller glue_helper ablk_helper psmouse drm snd_hda_codec cryptd pcspkr serio_raw snd_hwdep intel_gtt snd_pcm i2c_i801 r8168(O) i2c_algo_bit i2c_core snd_timer parport_pc tpm_infineon snd fan thermal tpm_tis parport mei_me tpm soundcore battery mei video shpchp
    Jan 22 19:30:58 Blitz-4 kernel: button lpc_ich processor sch_fq_codel ext4 crc16 mbcache jbd2 sd_mod atkbd libps2 ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
    Jan 22 19:30:58 Blitz-4 kernel:CPU: 3 PID: 1238 Comm: Cache2 I/O Tainted: G O 3.18.2-2-ARCH #1
    Please suggest any workaround/modules.

    Same problem to me. lspci output:
    07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    and logs:
    Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
    Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
    Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
    Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
    Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
    Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
    Apr 04 16:06:29 nzk kernel: rtl8192ce 0000:07:00.0: swiotlb buffer is full (sz: 9100 bytes)
    Apr 04 16:06:29 nzk kernel: DMA: Out of SW-IOMMU space for 9100 bytes at device 0000:07:00.0
    A bug report submitted to redhat bugzilla https://bugzilla.redhat.com/show_bug.cg … id=1203241 suggests it may be caused by a bug in the rtl8192ce kernel module since linux 3.17.7. I hope this problem could be solved as quickly as possible.
    Last edited by mike_nzk (2015-04-04 08:33:59)

  • Power button not working consistently

    Have owned my Macbook Air 13" for almost a year.  Over the last few months, I've had some issues with the power button when in standby mode.   I think this happened even before I updated to OS X Yosemite.  Sometimes when I go to turn my computer on, the button is  completely unresponsive.  I have to press the button over and over again.  Sometimes I hold it down firmly and it turns on, other times it seems to turn on after a light touch.  Any suggestions as to what I'm doing wrong?  Thanks-

    LauraTX1 wrote:
    The power button on my Tungsten E2 not working consistently.  What do I need to do to it?  Hard to turn my palm on when the button does not work properly.
    Post relates to: Tungsten E2
    Just an FYI Laura - you can press any of the hard buttons on your Palm and it will turn on.   Many of try to avoid using the fragile power button, choosing instead to use a hard button to turn on, and the normal timeout to turn off. 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • The back button does not work consistently, and rarely works if I open an attachment...any ideas on fixing this?

    The back button does not work consistently, and rarely if ever when I open an attachment. Does anyone have a fix for this?
    == This happened ==
    Not sure how often
    == I installed firefox

    Same problem here: I never had a problem with the previous versions and now I don't even get my homepage when I click Firefox. Instead, I am getting a blank screen that says "New Tab", only after I click the "Home" symbol I get my Homepage (Yahoo). The browser - back and browser forward button don't work anymore, very annoying. Normally a newer version should be an improvement but it looks like Mozilla really messed up with this "improvement". probably I am going to use Google chrome from now on.

  • Command-C is not working consistently to.

    Command-C is not working consistently for me. In multiple apps, but mostly in Word, I find myself pressing Command-C and then Command-V to paste and what I paste is the LAST thing I copied, not the most recent. I sometimes have to repeat teh sequence several times before it pastes the thing I want it to. Any suggestions? I tried searching for this problem, but didn't find any relevant discussions. Thanks!

    Hello eeinna,
    I was thinking it might be a good idea to reset the SMC and the PRAM on the computer. Here are the 2 articles for those processes:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    And
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    If needed I would also recommend testing the issue in a new user, and following the directions in this article as well based on what you find.
    Isolating an issue by using another user account
    http://support.apple.com/kb/TS4053
    All the best,
    Sterling

  • Skype for android still not working

    Since nearly to months now skype for android is not working on my phone. Reinstalling and uninstalling and then reinstalling does not help. Erasing and cleaning up eather.
    It seems that the skype account is not being accepted on the phone . any sugestions?
    Greetings

    Long hold on the Skype installation item in the Store application and select "Cancel". Then move to your phone's application list, find Skype there and select "Uninstall".
    After that reboot your phone and install from the Store again.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • Audio CD import is not working the cd is ejected before itunes can read it

    audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
    Lainey

    Does this happen with all cd's or one in particular?
    Reset the SMC http://support.apple.com/kb/HT3964
    Reset the PRAM http://support.apple.com/kb/HT1379
    Try a cleaning disc. You can get them at places like Radio Shack.
    If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

  • F4 help for 0MAT_SALES is not working in BI 7

    Hi Gurus,
    The F4 help for 0MAT_SALES is not working when distibution channel is selected as (!=02) in Bex Analyzer. But for all other values for distibution channel  i am getting values in F4 help.
    Since 02 is excluded it is supposed to give values for all other combination. but it not so.
    Could anyone of you please help me on this?
    Thanks in advance.

    Closing Thread

  • Short key for copy does not work all the time now.

    After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time.  It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac.  Please help.

    I've plugged in my default mac keyboard and the short key copy still does not work.

  • I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

    The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

    You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

Maybe you are looking for