Audio for thin client

Hi,
I'm creating a project in Captivate 6 and will need to add audio to each slide.  The project will be viewed within our organisation where a percentage of staff use 'thin client' machines which are basically dumb terminals.  On these machines audio and video struggle to work as they dont stream properly.
Although I don't have any video, does anyone have any tips on the best way to record audio but in a way that gives it the best possible chance of streaming properly.  Should i record direct in captivate or using somehthing like audacity?  Are there options for optimising audio?
Any advice gratefully received.
K

Thin clients are usually in place because bandwidth is very low.  Trying to stream video and audio in such an environment is not usually going to be successful.  In some thin client environments (e.g. CITRIX) that I have seen they even disable audio completely to conserve bandwidth.
You may be asking for too much trying to deliver video this way.

Similar Messages

  • JVM or JRE for thin client

    Hello, i'm wondering if there is any special jvm or jre for thin client pc, coz the usual jvm didn't work on my thin client using windows ce.net, please advise

    There are many offerings in the small device space. Try posting on the CLDC or CDC forum.

  • Need JNDI example for THIN CLIENT

    I ned a JNDI example for a thin client (as opposed to a java program connecting on the same machine as the server).
    1> Specifically, I need an example of a JNDI Provider URL
    Would it be <b>corbaloc.iiop:<host>:5004   ???</b>
    2> Also, how do I create a Queue Connection factory from within the GUI (Visual Administrator), so I can find out what to use on the THIN CLIENT Program?
    Thanks

    Hi,
    Please find the answers below.
    > I ned a JNDI example for a thin client (as opposed to
    > a java program connecting on the same machine as the
    > server).
    >
    > 1> Specifically, I need an example of a JNDI Provider
    > URL
    >
    > Would it be <b>corbaloc.iiop:<host>:5004   ???</b>
    Have a look at <a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/8f633e0084e946e10000000a114084/frameset.htm">this</a> link.
    > 2> Also, how do I create a Queue Connection factory
    > from within the GUI (Visual Administrator), so I can
    > find out what to use on the THIN CLIENT Program?
    Have a look at <a href="http://help.sap.com/saphelp_nw04/helpdata/en/26/9b569f525445b0b3d66474b7569d39/frameset.htm">this</a> link.
    > Thanks
    Hope that helps,
    Vladimir

  • Enable USB redirection on 2012 RDSH running on ESXi for thin client

    What I have configured right now is Windows Server 2012 RDSH server installed on a ESXi 5.1 host.
    I am going to be purchasing thin client machines that will need to use USB headphone/mic combo units.  I need to make sure that the USB redirection will work from the thin client to the RDSH RDP session.   I will NOT be using virtual machines
    on the server, only a terminal session.  Please help me with the following points.
    1.  Is windows 8 embeded my only option?
    2.  Does RemoteFX support USB redirection on server 2012 RDSH?
    3.  I have not been able to find an applicable guide to help me with what I am doing.
    Thank you

    Hi,
    After referring your post, I can understand that you are looking for RemoteFX USB redirection on server 2012. Yes, server 2012 support RemoteFX USB redirection and can able to use the benefit of server. Here providing you the related article for configuration,
    please go through beneath article.
    1. RemoteFX USB Redirection in Windows Server 2012 and Windows 8
    2. Configuring USB Device Redirection with Microsoft RemoteFX Step-by-Step Guide
    3. Introducing Microsoft RemoteFX USB Redirection: Part 1
    Hope it helps!
    Thanks,
    Dharmesh

  • Need java plugin for thin client like HP compaq t 5000

    Hello everybody,
    I need to know if there any java plugin for Internet Explorer on windows CE.net on a thin clinet like HP compaq t5000, my problem is that i have an oracle form that access to oracle databse, on the client i have thin client HP compaq t5000, oracle support told me to post my problem in java forums since there's no jinitiator support for windows ce.net, as the oracle forms is based on java applet, so it could be a solution if i can find a java plugin for windows ce.net on my thin client like that i can see the oracle form.........................
    please can anyone help me with a link where i can download a java plugin for windows ce.net and how to install it on such operating system...................
    Thank you in advance

    hello again, thank you for ur response, but please can u help me with how i can install the Creme jvm that support applets on the hp compaq t5000 under windows ce.net, because actually i don't have any idea on how we install software on such machine, coz it seems the isntallation on them it different than the normal windows xp...... i download the demo creme jvm zip file and i 'm not able to install it, if it is possible can u provide me with step by step instruction, just need to test my application on the demo version first, thank u in advance.....

  • Is EJB Java's solution for Thin Clients??

    I want to create an API that controls my odbc layer and place it on my server, not the clients.
    What is the best java solution to create thin client java applications?

    Well that's a big question but I'll give it a go. Use J2EE and let your clients be web browsers. Do all your work on the application server with servlets, JSPs and EJBs. That's about as thin as you can get. Browsers don't give you the best interface in the world but you gain:
    1> No 10meg JRE installation on each client machine.
    2> No worrying about the JRE version.
    3> All upgrades occur near you so no client version to worry about when you make changes.
    blah blah blah

  • HP t5325 thin client audio issues problem

    Dears and my Friends.
    I have one problems. Our company was bought  2 type for Thin client 5325 , Thin client 5745 device. This solution by Vmware view 4.6 complete. But Audio streaming error just 5325. Or 5745 normal running audio and other service. 
    I have been configuration checking done. How to this problem repairing?
    Please help me!!!

    By looking at the date of the post, I would assume that you have fixed this, but for the benefit of any future readers this issue is caused by a bad firmware.  The firmware that it shipped with in February, and perhaps what you purchased in June, had bad audio driver issues.  The fix is simply installing the new HP T5325 BIOS and firmware. 

  • SCOM monitor on Thin Clients

    Dear all,
    We know that we cannot configure SCOM agent on Thin Clients .  We  would like to know if we can set up a SNMP monitor for Thin Client?
    We are able to discover through ICMP , but not through SNMP. We need to achieve monitor the Thin Clients up and down (Availablity ) only?
    One more question Via ICMP , can we monitor Thin Clients up and down (Availablity )?
    Sengottuvel

    My thought is no, and here's why.
    According to this TechNet article: http://technet.microsoft.com/en-us/library/hh212935.aspx, it states:
    Windows computers running SNMP are filtered out of discovery results if:
    The device type is “Host” and the vendor is “Microsoft”
    The sysDescription field contains “Microsoft”
    The sysOid starts with .1.3.6.1.4.1.311.1.1.3.1
    The sysOid contains 1.3.6.1.4.1.199.1.1.3.11
    Therefore, I don't think you will be able to use SNMP to monitor the Thin Clients. You could use ICMP (aka PING), and make a simple monitor to PING the system. If there is a response, it is up, otherwise, it is down. But you also have to take network latency
    into question, since that might case packets to drop, etc. which might throw a false-positive. 
    Please remember to click “Mark as Answer” on the post that helps you.
    AdinE MCSE, MCSA, MCITP, MCTS; (Specializing in System Center and Private Cloud)
    LinkedIn: http://ca.linkedin.com/in/adinermie
    Website: http://AdinErmie.Wordpress.com

  • Installing Creative Cloud apps on a thin client

    The bulk of our staff are using thin clients connected to application and data servers. How are the apps installed in this case?

    Hi MiwatjHealth,
    I am sorry but Creative Suite 6 and Creative Cloud Applications are not tested on Vitual Environment also they are not Server products. and so we can't provide much help to you. As per my understanding Applications will get installed on Server and it will create a Session for Thin Client user to access their system.
    Please visit this link for more details.
    http://helpx.adobe.com/creative-suite/kb/technical-support-boundaries-virtualized-or.html
    regards,
    Abhijit

  • Which would be the best NAC approach with thin clients up today?

    Hello guys,
    Which would be the best NAC approach using CAM/CAS infrastructure for thin clients? I guess nac agent is still not supported on thin clients/virtual desktops right?
    Would mac address authentication be the best option?
    Regards,
    Emilio

    Hello guys,
    Which would be the best NAC approach using CAM/CAS infrastructure for thin clients? I guess nac agent is still not supported on thin clients/virtual desktops right?
    Would mac address authentication be the best option?
    Regards,
    Emilio

  • RemoteApp on Thin Client

    Hi all,
    Newbie question I'm afraid....
    I have an application that I wish to host on a Server running 2012r2 with RDS and run on either a thin client or a touchscreen device running a thin client.
    I only wish to run this one application and so my question is this:
    Can I create a remoteapp and have the thin client run that without any desktop or do I have to use a virtual desktop
    and autorun the application?
    Any recommendations appreciated,
    Thanks
    Rich

    Hi Rich,
    Thank you for posting in Windows Server Forum.
    Yeah, nowadays RemoteApp is the best way to provide application access to user. But to access RemoteApp we need to run RD Web sites such as
    https://rds.com/rdweb. So if you want to access RemoteApp from any of the device you need to access RDWeb sites. So for thin client you can access RemoteApp directly on thin client without installing Virtual machine. Just make sure that you need to
    make correct configuration under thin client by providing terminal server name and RD web URL and so on. For your guidance you can refer
    this video.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Remote sound on thin client

    Hi,
    I'm not sure if this is the right board but I couldn't find anything for thin clients. OS is Win 7 embedded.
    I've set up a RDP connection to a server and that starts up an application. When an error occurs like wrong username etc the app plays an error sound. We used to use Wyse terminals and those played the sound fine through the speakers but we've switched to HP 510's and 520's and they don't play the sound at all. 
    In connection manager Local Resources are set to bring sounds to this computer.
    All locally generated sounds work fine.
    Any advice?
    Many thanks,
    Wes

    Now the parameter file comes up when I run the report using this this URL:
    http://PR-apps-svr/dev60cgi/rwcgi60.exe/getjobid=87?server=PY20Repser
    When I click SUBMIT QUERY, I recieve this error:
    Error: The requested URL was not found, or cannot be served at this time.
    Oracle Reports Server CGI - Reports Server name is not specified.

  • HP T5565 Thin Client

    Anyone know how to disable -nolisten option for the X Server?
    Removing it from /etc/X11/xinit/xserverrc doesn't work. 

    Remo,
    You will want to ask this on the HP Enterprise Business Community.
    You may need to re-register to post questions as it is a separate forum.
    Here is the section for Thin Clients and other Workstations.
    http://h30499.www3.hp.com/t5/Desktops-and-Workstations/ct-p/bsc-403
    Good luck.

  • Thin Client t610

    is it possible to create a configuration file or template with all the settings we select and if so How? 

    Hello Hardw,
    You are in the HP consumer products forum.
    You will also want to ask in the HP Enterprise Business Community.
    Here is the specific area for Thin Clients.
    http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/bd-p/bsc-635

  • Thin client T610 Zero Core admin password reset

    I forgot admin password on T610 thinclient.
    How can i reset it ?

    Hello Hardw,
    You are in the HP consumer products forum.
    You will also want to ask in the HP Enterprise Business Community.
    Here is the specific area for Thin Clients.
    http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/bd-p/bsc-635

Maybe you are looking for

  • BW Business Document Service (BDS) in Design Studio

    Hi all, I am trying to migrate a WAD-Report to Design Studio 1.4. In WAD it's possible to use BW Business Document Service (BDS). Documents can be opened by using the context menu. I created a Test Report in Design Studio 1.4 and added a crosstab and

  • Infopath forms in Sharepoint

    Hi guys, momently, I can publish Infopath doc in Sharepoint, but if I want to fill the second form in and submit it, I will get a error, that the file already exist. Is it possible to give a ID to every form ? So they dont overwrite eachother ? That

  • Centralized WLC Design Question

    Dears, In my scenario, i am designing CEntralized WLC deployment. I have 30 AP in Buidling X(200 Users) and 20 AP in Buidling Y(150 Users). I am planning to install HA WLC CLuster where Pimary & Secondary WLC will reside in physically different Data

  • HT201210 My Iphone3g cannot be restored. I get an unknown error 21. can anyone tell me what do I do

    My IPhone when started shows the "connect to itunes"  (ie. itunes logo with a cable picture) on the screen. I tried connecting to my itunes, did a restore to factory setting. But even after that it does not start and continues to display the same sig

  • Playbook screen goes purple with distortion when taken out of standby. Is my playbook dying?

    In the last 2 weeks, about half the times that I wake uo the playbook from standby by swiping screen, it displays a distorted purple screen. if I touch the screen or use bezzl commands the distortion changes, faint lines on screen move. everything so