Audio from Final Cut Pro very very low

Hi guys I have not have a problem for awhile. A friend of mine recently move from DPS Velocity system to Final Cut Pro Studio 2 using a Intel Pro 3.2GHZ with all the bell and whistle, so I am giving him some training and tutorial. They have some footage in Velocity which I use MPEG StreamClip to convert to a DV file, I brought it in FCP (Three File one video and two audio makes one clip) it play in FCP Played ok when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play. There is other clip in the project, some capture in FCP and others imports in FCP Studio, DVD Studio Pro and QuickTime plays these audio ok. The audio from Velocity are Wave files, I taught anyfile that plays in FCP would play in QuickTime. Does anyone knows how to solve this problem please to help I would like my friend to change both system to Apple and FCP thanks.

Wellcome to the forums!
when I export it to DVD studio Pro the audio is extremely low (barely audio able)I open the clip in QuickTime and it did not play.
I guess you encoded it to Dolby AC3 with Compressor, did you? Then you must chamge the standard Dolby preset as follows to keep the original FCP mix and level:
- Dialog normalization: -31
- Compression preset: none
And QT cannot play AC3 files.
Hope that helps !
  Alberto

Similar Messages

  • Can I mute all audio from Final Cut Pro X?

    Can I mute all audio from Final Cut Pro X so that I can listen to music while I do sorting, keywording, favoriting, etc? I'm doing a video where all the camera audio won't be used anyways, so I don't need to hear it in FCPX.. I'd rather just listen to my music instead. Thanks.

    For clips in the timeline, andynick's suggestion works fine - temporarily disable the audio roles will play everything without audio and you just have to reenable these roles later.
    For clips in the Event Browser, you can also disable and reenable audio for a bunch of clips all at once. Select the all the clips you want, open the inspector, click the audio tab and uncheck the box (for "stereo" or "mono" or whatnot) under "Channel Configuration". Again, to reenable just check this box again.

  • Exporting audio from Final Cut Pro

    ok I have my film clip in a project in final cut pro, it is an interview, and I want to export the audio part allowing me to work with the audio in Logic 9
    how do I export the audio please>

    File>Share>Master File and in the window that opens select Settings.
    Then in the Format section select Audio Only from the drop-down menu and also choose the audio format otherwise it will default to AAC.

  • Final Cut Pro exports very low quality video to DVD

    I tried exporting a timeline to a DVD from Final Cut Pro X 10.0.3 today. Every clip in the timeline was 1080x1920, but the DVD export menu insisted (without offering an option to change settings) that Final Cut export at 720x480. The Blu-Ray menu offers 1080x1920 exporting, though. Is there any way to get the app to export to DVDs at 1080x1920?

    Yes, you can create an AVCHD Disc which is basically Blu-ray quality on a cheapo standard DVD.
    Select Share>Blu-ray and in the window that opens make sure the Output Device is your DVD burner, not the hard drive.
    Note that you will only get about 35 minutes at the highest quality.
    If your video is longer the data rate will be reduced but should still produce good quality hi-def up to an hour or so.
    You must play the DVD in a Blu-ray player. It will not work in a normal DVD player.

  • How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

    Hi
    I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
    Here are the settings:
    HD:
    1 Video CODEC                 XDCAMHD50
    2 Wrapper format           QuickTime Self-Contained
    3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
    4 GOP                                   Long GOP
                                                 Closed GOP
    5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
    6 Movie version               UK Home Video Version
    7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
    1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                              1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
    2 Resolution                      1280 x 720
                                               1920 x 1080
    3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
    4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
    5 Chroma format              4:2:2
    1 HD audio format           24 bits/sample 48 kHz sampling rate
    2 Track layout                    Track 1 – 2.0 Stereo L mono
                                                Track 2 – 2.0 Stereo R mono
                                                Track 3 – L
                                                Track 4 – R
                                                Track 5 – C
                                                Track 6 - Low frequency effects LFE
                                                Track 7 – L Surround
                                                Track 8 – R Surround

    First of all, what are your sequence settings?  Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this).  Do you have a surround sound mix?  
    You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs. 
    Do you understand about safe zones for graphics?  If not, post back.
    I don't see any option to set the GOP in xdcam in compressor.  This may be built in to the xdcam format.
    I don't see any option for 720 xdcam hd in compressor. 
    There are many other tools available for this kind of work, but they may be out of your price range.  You might want to just find a facility with experience in deliverying this sort of thing.

  • Exporting From Final Cut Pro 5.0

    Hello,
    I need to export my work from Final Cut Pro 5.0 to a Quicktime Movie with the following settings -
    Compression: H.264
    Frame Rate: 15fps
    Bit Rate: 200k
    Is this posible without loosing the quality of the video footage? The footage was capture from a MiniDV tape.

    Is this posible without loosing the quality of the video footage? The footage was capture from a MiniDV tape.
    If you want full resolution 640 x 480 then 200Kbps isn't going to look very good. As a guide you can note that Apple is using about 600Kbps to encode the iTunes video content and that has a resolution of only 320 x 240. However, since you're only using a frame rate of 15fps you should be able to produce good looking content at just over 1Mbps for 640 x 480.
    Of course, it does depend upon the nature of your source video (the subject). Simple "talking head" shots could go lower, while rapid action material might need considerably more than 1Mbps (along with a higher frame rate).

  • Are the sound clips from Final Cut Pro Fair Use?, Are the sound clips from Final Cut Pro Fair Use?

    I recently found YouTube had flaged a video for containing a "third party" sound clip.  All clips I've used in videos for YouTube have come directly from Final Cut Pro X.  Any idea if the sound clips are Fair Use?  I'm not sure how to repsond to YouTube and don't want to get a mark against my account due to this.

    You can pretty much forget about monetizing that specific video. 
    [Okay... I'm going to ramble now...]
    To avoid problems with youtube, you need to post a copyright (like this: @2013 by Your Name) on the video (I recommend within the first 10 seconds) -- and you better have it *right*. If you use other audio and video, as long as you have secured the proper permissions for use, you can still claim a copyright to the video you post on YouTube -- it is your creation (but it better not be a single clip of somebody else's work being passed off as something you did -- just to be clear -- your videos need to have original content that you created in order to justify the © you put on it. If you use *other stuff* as long as it's *with* permissions, it's still your video.) [If your video is going to be monetized -- make absolutely sure you have that permission for *commercial* use! Quite a lot of sources will specify that their materials *cannot* be used for any commercial use without further permissions, if at all. With Apple Loops (pro apps music and sound) you do have that express permission to be used in commercial works as long as it follows the EULA. More below.)]
    You also need to specify the music and/or sound effects are "licensed from Apple Computer and used with permission" and you might as well state they are "made with Apple Loops". YouTube understands the EULA of the Apple Pro software (Logic, STP, FCP/FCPX, etc...) -- but even Apple licensed all that stuff from outside sources. Apple just takes care of paying "them" for it in advance so you don't have to (you buy it with the cost of the software license.)
    You cannot use any of the "music beds" by themselves, in their entirety (all those nice long demo pieces everybody likes so much and you hear several times a day on [local] TV commercials). The EULA actually specifically states this (although you might have to read it two or three times until it becomes clear...LOL). Even loops are not to be released "as is", in their entirety, in any "derivative work". So, basically, make sure some other sound is mixed in with it (if it's music, add drums or other percussion, harmony, or duck it under talking, etc...)
    The point is, no matter what audio source you have, if it is *music* (or foley) and EVEN IF you are the creator of that music or sound effect, you need to specifically put it in writing IN the video (not in the description). You need to reference the source (e.g.: stock footage by BottledVideo.com) and state it's being used with (or by) permission. [According to YouTube: I have copyright infringed MYSELF!!! just for leaving out all this *stuff* from my subsequent videos (music that I composed and performed myself on guitar... I was livid... but it stuck!).]
    I can pretty much guarantee that within minutes of  posting your video (if it is monetized) -- some real live person at youtube puts eyes on that video to make sure it is properly "signed". I can tell by how long it takes for the monetize checkmark to go from dark to light green -- usually less than 10 minutes.
    If your video is not monetized, and it's not a blatant violation, they probably will let you off with a warning, tell you that you don't need to do anything "right now" and it won't count as a mark against you... If it IS monetized, it won't be - they'll turn it right off and your chances of winning a challenge are almost 0 (unless you can PROVE you own the material -- and  I have won a challenge -- see * below);  and you will probably see a "Copyright Notices" (or similar) item in the menu on your channel settings. If you can redo the video - pull the old one, put in the new info and re-up it.  It's a royal PITA, but in this day and age, it's a necessity.
    All videos destined for youtube should be treated as mini motion pictures and be prepared as such with full "disclosures" in titling... Welcome to  21st Century Pox [This statement is not meant to be derogatory to 21st Century Fox or imply any association or criticism or slander, and is only to be intended to be received as a parody on a common phrase that is currently still in use... No words were harmed in the formation of this pun.]
    Get the point? YouTube tries to tell everybody -- but they've done a pretty lousy job of doing it. It's taken me, oh, I guess a year or so to learn to "behave" after wandering through a mire of confusing information from too many different sources -- and even if I am the sole producer of 100% of all the content in the video, I *still* have to place that © and "commit" it; it is *not* taken on faith.  I actually had to go back and reread all my licenses and interpret the legalese to figure it out. It would have been simpler if they just put it: Your video is a miniature professional production. Make sure it includes all titling to reflect all participants -- *just like you'd see in a modern major motion picture or a major broadcast television series* -- I think everyone would pretty much understand what that involves. You don't have to get quite that extreme, just cover you bases and your a©©.
    I tried to cover it all... but I'm pretty sure I haven't... so... good luck!
    *How I won my challenge with an Apple Loops composition:
    1) the music, even though using "canned" loops, was an original complex composition (I'll argue theory with anyone about this... it will be based on limited sets and recombinants as well as the theory of instrumentation and timing. In other words - I massage the heck out of loops until they don't sound anything like the originals. I almost never use audio loops -- always MIDI.) [BTW - this was another instance of copyright infringing myself - I had used the same music in a previous video I produced a year or so earlier... when I, like you, thought I was "free" to use the clips as I saw fit.]
    2) the music I used in the video was originally created in Logic and I made sure the ID3 tags were filled in with my name and copyright information
    3) I have a YouTube Associated Website (think this is a "partner" thing... and google "sanctioned") but if you see it, make sure you associate your domain. [I think you might be able to create a Google+ account and associate a domain that way if it's not part of your YouTube settings.]
    4) I uploaded the original mp3 with the ID3 tags to my associated domain.
    5) in the challenge, I 1) attached the original mp3 (w/ID3 tags); 2) gave youtube a link to the copy on my associated website for *verification* that the files belonged to ME; (and they already had the URL to the video in question -- a basic 3 point verify.)
    It worked. They accepted the verifcation. (And this was the first challenge I've been able to win.) [This was very recent. What about the others? I might get a chance to complete the verifications, but I know for some, I've used up my challenges. The only other option is to pull them and redo them...]
    One last word of advice: It does not pay to get "huffy", indignant, or righteous with YouTube in a challenge. They don't care.  <-- read that again a lot more slowly...  They have their own behinds to take care of — and your video (and/or account) lives (or dies) by their grace. If you read that and infer that I have been those things, then yes, I have... to absolutely no avail... even though I thought I was right (to the best understanding I had at the time) — they have rules. Be respectful. In general, they're pretty relaxed about all this even though it might not look that way to many users. Once you get the rules down, everything goes a lot easier... even if it is a little more work. You have to take responsibility for your own work.

  • Import from Final Cut Pro not working correctly

    I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
    I exported the project as an XML file and imported that into Premiere Pro empty project.
    I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
    Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
    There are no markers.
    Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
    The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
    The keystrokes to move to markers do not work.
    The "Clear all Markers" function is greyed out , like it is when no markers exist.
    If a "Dynamic link to Encore is performed, there is no markers in Encore.
    If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
    Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
    However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
    FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
    I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
    I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
    Thank millions for a solution.

    It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo.  I had been using Final Cut Pro without any problems right until I upgraded to Yosemite.  I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating. 

  • What compression to use when Exporting HD video from final cut pro PAL setting

    Hi there
    I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
    Any advice greatly appreciated!
    thanks

    Just to add two suggestions.
    1) Consider putting your four movies on two disks.
    2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
    Russ

  • Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

    I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

    First: How are you exporting? Are you using the Share feature or  Send to Compressor?
    Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
    Russ

  • Retrieving imported AVCHD files from Final Cut Pro X

    Hi there, does anyone know how to retrieve raw AVCHD clips from Final Cut Pro X, after they have been imported? I shot some footage on my GH2 and it DID import from the camera into FCP X, but it's not running smooth at all. I heard that it's better to convert the files into pro res first, but I wanted to see if it worked. It does work, but not very well. So now I want to find the original video files I imported and convert them into pro res and then import again. Anyone had experience with this?

    I think it all comes back to work flow. The whole reason I have opted to convert the original files to pro res is because it is choppy in the timeline when I'm editing. It seems it's true that FCP X really prefers to work with 'optimized media'...or Pro Res instead of reformatted versions of AVCHD. I would like to work with this original format, mainl because the footage isn't as compressed and hasn't lost a generation...and look absolutely pure and gorgeous in high bit rate from my GH2, however, what choice do I have but to convert to Pro Res if I am unable to edit smoothly? I think Ian had the right idea when he said to compare the footage of both, but again, if I can't even edit in AVCHD then what's the point? I think Apple needs to rectify this in the next update as I'm sure there are so many users out there who would prefer editing in this original format. Is there a noticeable loss of quality, that's what I am curious about.

  • Mini-Dvi to Video out from Final Cut Pro working

    Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
    It's working fine.

    @ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
    @ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
    My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

  • Burning a video from Final Cut Pro using iDVD

    When I export and save my video from Final Cut Pro to a folder (export->Using Quick Time Conversion). When I do that there are several different videos that are saved in my folder (ie-Kelly Michelle; Kelly Michelle-av1; Kelly Michelle-av2; Kelly Michelle-av3; Kelly Michelle-av4; Kelly Michelle-av5).
    iDVD is the program I need to use, I do not have any other programs. Therefore, I import the file to iDVD and once everything is ready in iDVD I try to burn the dvd. However, in the last stages of burning a window pops up and says that "an error was found during the burning process". It does not tell me what kind of an error it is. Does anyone have any advice or a step by step process that I need to do in order to burn my dvd successfully.

    The simplest way to prepare a video for iDVD is to *Export/Quicktime Movie* (NOT Using Quicktime Conversion), select Current Settings, Audio and Video and, depending on your needs, other 2 options:
    o- +Make Movie Self-Contained+ is preferred to have an independent movie (you can move the exported file, you can continue editing your FCP project before burning the exported version, etc.) but requires more disk space and more time for exporting.
    o- +Chapter Markers+ (NOT All Chapters) must be selected if you created Chapter Markers in FCP (markers in the timeline, not the clip, and clicked the Add Chapter Marker button in the marker dialog).
    The resulting .mov file (whether self-contained or reference) may be easily imported to iDVD.
    Piero

  • When sending job from Final Cut Pro to Compressor using local QCluster

    When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
    If I use 'This Computer' it works fine.
    What gives?
    Fresh install of OS and FCS.
    Thanks!

    I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

  • Exporting from Final Cut Pro for DVD Studio Pro

    In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
    Erin

    The best and only format is mpeg2/m2v.
    The encoding rate for video is based on the length of the sequence in h/m/s.
    They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
    Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

Maybe you are looking for