Audio from firewire interface not available to QT Broadcaster for streaming

We have two Mirror Door Power Mac G4's (Model PowerMac3,6) set up for originating streams.
One has a Lynx Studio L22 sound card in a PCI slot. QuickTime Broadcaster sees the audio from this card and we can originate streams fine.
The other computer has an M-Audio Firewire 410 Audio Interface connected by firewire. This interface is selected as the audio source in QuickTime Broadcaster. When we start broadcasting clients can see the stream, but there is no audio signal present in the stream.
Why is it different when using the external firewire audio interface? All else is the same between the computers. Both send streams to the same QTSS; both have identical RAM; both have the same CPU; both have no issue connecting to the QTSS.
Thanks.

There is a description of a possible workaround at <http://homepage.mac.com/beryrinaldo/gbsf/>. It worked for me in principle, however, it has a significant delay. This does not allow you to monitor your track, e.g., using headphone. You also have to adjust the track after recording manually.
Another workaround would be to record a track using QuickTime Pro 7. QT lets you record directly from a DV camera via firewire. However, you still need to export as AIFF, import in GB, and adjust the track manually for every single recording.
It would be best to have a audio device (something like Soundflower) that can capture incomming signals from a DV camera directly and that is mentioned in the list of possible choices in GB's preferences.
Anyone out there who has seen something like that?
Greetings,
Claus

Similar Messages

  • Deployed application from NWDS not available in local folder for IView crea

    Hi Gurus,
    I have deployed an Web Dynpro Java application from NWDS. The application deployed fine.
    But when I tried to cretae the Web Dynpro Java application from the Portal the corresponding application is not available in local folder for IView creation.
    How do i need to proceed for Web Dynpro Java IView creation.
    Thanks & Regards,
    Kiran Kumar k

    Hi Kiran,
    Please check under sap.com/local  OR you custom package while creating Web Dynpro Java application iview.
    Then select your WD Application if you found - Applcaition >> package >> then select Application name and click on next.
    Verify your application deployed or not or in which folder at content administration >> web dynpro >> searh your WD application.
    Hope it helps
    Regards
    Arun

  • LMS 4.2 sub-interface not available in the instance selection window creating poller

    Hi All,
    I have sub-interfaces created on the switch and are in active(up/up) state,but these sub-interface not available for selection in the instance window while creating the poller, and am not able to monitor the traffic on these sub interface in the performance management.
    LMS will not display the interfaces in the instance selection window if they are not active,but here the sub-interface are in active state but these are
    not available. can anyboody help me out ??
    Thanks,
    Channa

    Any Idea..??

  • "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
    Is there a way to tell Safari what encoding to use if the web page fails to do that?

  • Adobe says the Magic Extractor Tool is not available in Elements 13 for 64 bit systems. Is it available on 32 bit? Is there indeed a 32 bit version?

    Adobe says the Magic Extractor Tool is not available in Elements 13 for 64 bit systems. Is it available on 32 bit? Is there indeed a 32 bit version? Is this tool available on earlier Element versions?

    The magic extractor disappeared after PSE11. It's recommended that you use the quick selection tool together with refine edge, if necessary.
    From the refine edge dialog you can output your cut-out to a new layer or layer mask.
    See Pete Green's FAQ
    https://forums.adobe.com/thread/1302663

  • I got a new iPhone 5 when I went to add my music back from the cloud Not on this iPhone Rihanna for some reason will not re load to my new phone the Little wheel just keeps moving

    I got a new iPhone 5 when I went to add my music back from the cloud Not on this iPhone Rihanna for some reason will not re load to my new phone the Little wheel just keeps moving nothing ever happens.  I turned it off and still nothing
    whats up with that I have one beatles song and one kenny chesney also

    Mate, I'm trying to find out if it was shipped like that or not. If someone else has had the same issue then I can go back to Apple and have them look into it further. If not then as I said Vodafone is selling second hand phones and they will have to replace the phone.
    Vodafone account manager is saying that he has never heard of anything like it.
    So I'm left with one of 3 answers.
    1: The phone was shipped like that so its a factory error.
    2: The Apple genius doesn’t know what he's talking about then I can go back to the store and ask for a second opinion.
    3: Vodafone is selling second hand phones as new.
    I need to narrow it down so I can deal with the account manager appropriately 

  • I want to delete music from iPad but keep it in I cloud for streaming only

    I want to delete music from iPad but keep it in I cloud for streaming only

    Sorry I forgot to mention that I have ITunes Match and want to save space on my IPad and just stream music on the cloud but accidentally downloaded a few songs but want to delete them.

  • Recording audio from firewire video source

    What does it take for Soundbooth (or more specifically OS X) to recognize firewire video as an audio source?
    I have a video conversion box that accepts analog video/audio input and connects via firewire to my MacBookPro. I can use that to capture video with Premiere or OnLocation, and extract the audio from that, but in the event I'm just converting an audio source, I'd like to use the same box to capture audio directly to Soundbooth. But 'Audio MIDI Setup' shows only built-in input and a USB audio source.
    Otherwise I either have to use built-in audio input (normally not available because I have external speakers plugged in), or get a USB or firewire audio interface. I'll probably do that eventually but was hoping for a software solution of some sort.

    You should look into WireTap Studio from Ambrosia software. It will record ANYTHING at all that goes through your sound card, regardless of the original source. I know, "If I paid for SoundBooth, why should I go buy another piece of software?"
    I've used Wiretap since 2002 when it was still a freebie. It's gotten a lot better in eight years, and when you see everything you can do with it (like recoding streaming audio from the web, or podcasts, getting soundbytes from DVDs, or recording from your TV or even live with a mic) you'll agree that it's another $69, but $69 well spent.
    I used Wiretap to convert more than 1400 cassettes into mp3. I've also pulled songs from movies that are unavailable anywhere. I've recorded live TV audio. You have a multitude of format and quality choices for recording and saving.

  • Firewire Interface not working because of missing voltage

    Hi,
    I am using a Qutafire Firewire Interface for music production on my MacPro. I just got a new 17" MacBook Pro and wanted to connect it to the laptop. Unfortunatelly the Firewire 400 port doesn´t suooly enough power for the interface. - I tested it with the old macbook of my girlfriend and it is working as allways. I also tryed to connect it with several new Macbooks and Macbook Pros of my friends and it isn´t working there either. Can it be, that the new motherboards etc. don´t give support enough power to the firewire ports?
    What can I do?
    Thanks
    Michael
    PS: Well I can connect the interface with the laptop using my taurus raid system (connect via FW 800) but, as soon as my Logic projects become bigger (more software instruments) the lantency arises, too.

    How do you know the issue is insufficient power? Are you getting an error message to that effect?
    Firewire is a standard and I have a hard time believing Apple would have violated the standard and provided sub-par power output from the MBP's ports. On the other hand, it could be that the Qutafire requires slightly more power than the FW spec allows for, and that older Apple notebooks were tolerant of the out-of-spec condition whereas the MBP is not. I have seen cases like that with USB.
    Perhaps a small, portable, FW hub with its own power supply will be your best solution if you can't get it working any other way.

  • Results from another Query - not available

    HI,
    My environment is Business Objects XI 3.1 SP2 Edge series , i have  below quereis with web Intelligence Reports
    1. not available  the functions/options  Results from another Query(Any) or Results from another Query(ALL) at Query Level.
    2. not getting list of Values for pronpt until i refresh values for prompt?
    Please suggest me is there any fix packs available for the same to availle that functionality.
    Best Regards,
    Reddeppa K

    not getting list of Values for pronpt until i refresh values for prompt?
    There is option called  "Automatic refresh before use"  for the object properties available in the universe designer.
    Please check the box for the object you are using for populating the list of values and export the universe.
    not available the functions/options Results from another Query(Any) or Results from another Query(ALL) at Query Level.
    There is a limitation for the query on query functionality that the both the queries can-not be from the OLAP universe.
    I guess the query which needs to be filtered should be built on universe from the relational data base.
    Regards,
    Rohit

  • Reading from ABAP memory, not available in call stack

    Hi,
    I need to read a table from ABAP memory. It is not available from the call stack, so I can’t use the standard ‘assign’ approach. The internal table is listed under System areas -> Area ITABS-HEADS with the name \FUNCTION-POOL=MLSP\DATA=IY_ESLL[] 
    Is it even possible to read this table? Seems as though I have to access function-pool MLSP to find it.
    Regards,
    Damian

    Hi,
    The main program of this function pool is SAPLMLSP. If you in any of theses includes can add a small form that returns the content of internal table ( IY_ESLL[]  ) that should solve your problem.
    In the program that need the data, write something like :
    PERFORM Z_GET_MLSP_DATA(SAPLMLSP) using GT_ESLL.
    This form can be created within any sub-include within the SAPLMLSP.
    However, with a quick look at SAPLMLSP does not reveal any user modifiable includes, but I didn't check very carefully.
    If you are on ECC 6.0, there are plenty of enhancement spots, which could be used for this purpose.

  • Verizon/Alltel iOS5 - Lost VERIZON from Banner, Network Not Available

    **Former Alltel customer on Verizon with Alltel plan**
    Updated my iPhone to iOS5 last night. Everything seemed to work fine.
    This morning I used *228 and attempted to update my PRL. Immediately afterwards, "VERIZON" disappeared from the top banner. Network under the About screen shows "Not Available".
    I cannot check my PRL either. Dialing *#5005*4357# no longer works and just gives me a Verizon recording.
    This is very close to the initial problems I had when I first purchased the phone!
    Brachus
    PS - Apple, you still need to add iOS5 to your drop down list of operating systems for products.

    **Former Alltel customer on Verizon with Alltel plan**
    Updated my iPhone to iOS5 last night. Everything seemed to work fine.
    This morning I used *228 and attempted to update my PRL. Immediately afterwards, "VERIZON" disappeared from the top banner. Network under the About screen shows "Not Available".
    I cannot check my PRL either. Dialing *#5005*4357# no longer works and just gives me a Verizon recording.
    This is very close to the initial problems I had when I first purchased the phone!
    Brachus
    PS - Apple, you still need to add iOS5 to your drop down list of operating systems for products.

  • Parameters from SQL command not available in Web Viewer

    Hello,
    I recently built a report using Crystal Reports 2008, and I'm using it with CR4E 2.0 SP1.  The report has had a SQL command inserted into it, instead of pulling in tables and taking the desired fields.  This was done to speed up rendering time.  The SQL command also has some parameters in it to adjust the date, etc.
    When the report is viewed in CR4E under the web viewer, the parameters are not available to be changed.  They will appear at first for the initial settings, but cannot be changed afterward.  These parameters were set to "Editable" in CR2008.  In fact, other reports will work this way, but those reports don't use SQL commands as a datasource.  Is there another step I haven't completed?
    Thanks so much for your help!
    Edited by: John_AM on Jun 29, 2009 3:31 PM - Added CR4E version.

    Hi John,
    This is NOT a support case management system but a public forum for all to use. If you don't get an answer then you always have the option to purchase a support case and ahve a dedicated Engineer assist you.
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
    Thank you

  • Install option not available in App Store for some apps

    Why is the option to install not available for some apps?  The app info shows up but the install button is not there.

    The button should read either the price of the App, or Free if they are free. Alternatively if you have purchased/downloaded the App in the past but deleted it from the device, it should have a button with a cloud icon.
    Pressing it will initate download and installation.
    Is none of this the case?

  • Tracks / Album not available after sign up for Premium?!

    Yesterday while listening to some album, the ads finally got me crazy so I signed up for premium - and there is the 30 days trial at first so I signed it up with my credit card. And it recognize my location at Malaysia.I download the whole album for offline listening and everything went pretty smooth until somewhere half an hour later... the whole album become not available. Sometime the error just say not availble (for no reason) and now it say not available in my country... Whatttt....? But I had been playing that for so long time and now you telling me it's not available at my country AFTER I signed up for premium?! Is this a joke / trolling / bug or what?I don't dare to download anymore tracks just in case they all become like this! 

    Hi sonywillrobyou, Sorry to hear about this. You have already been dealing with the right support. Please wait for a feedback from them.  Thanks, Hailey

Maybe you are looking for

  • Receiver Determination and Interface Determination Condition conflict in ICO

    Hi, I found a strange issue today while configuring two receivers using the Receiver and Interface Determination conditions. Sender - Proxy Service Receiver1 - ReceiverA Receiver2 - ReceiverB Receiver Determination Condition : When Field1 = 100, mess

  • N73/Pc Suite issues

    Hello to all, just wondering if some1 could help us. Pc Suite connects to our phone and we can move music etc to and from phone and pc, but when we go on to nokia software updater it only gets to step 2(preparing udate- searching for connected phone)

  • Change row color

    I am developing an application using Oracle 6i Forms and Developer,and i am new to it. I have a datablock on a canvas and i am trying to do sth: When the user clicks on a row of the datablock,the entire row background color should change to green and

  • Adobe  Standard  X1  to  convert    PDF  to  Excel

    I  was  advised  by  an  adobe  staff  member  to  purchase   Adobe   Standard  X1  to  convert  PDF  to  Excel.   However  the info  is  placed  randomly  on  the  page.

  • Security in WebAS

    1) Does WAS have any mechanisms out of the box to prevent session hijacking? 2) When webdynpro components call internal session beans via web services, is there any other authentication between components/ objects to ensure that the called object tru