Audio From Logic Into Virus TI2

I have the latest Logic Pro and OSX, and latest Virus software, everything is fully up to date. I know how to use the 3 sets out output from the Virus in Logic, using TI. Piece of cake. But, how do I send audio TO the Virus FROM Logic? Is there a way to do this through TI, or do I have to use my audio interface and send an analog signal to the back of the Virus?

have you tried searching for a solution at http://infekted.org/virus/ the Unofficial Access Virus & Virus TI Forum - since 2002?

Similar Messages

  • Inputting audio from Logic into iMovie video, involving syncing etc.

    Hey guys, Im looking to make some song covers on youtube. But instead of just using audio from a camera, i want to input enhanced audio from using logic etc, and then syncing it with the video footage, using iMovie. An example of what i want to do: http://www.youtube.com/watch?v=u1SN1eN1_m4
    please help me !

    Hi,
    I'm having this exact problem right now.
    Did you ever figure it out?
    Sorry I don't have a solution...
    I'd appreciate any suggestions you may have discovered.
    Leanne

  • Sending audio from logic to external hardware effects, and back into Logic

    Hi,
    I am currently trying to send audio from Logic to external hardware effects and then record this back into Logic.
    My audio interface is a Edirol UA-25 which has only two outputs '1 and 2'.
    I understand that I could create an 'aggregate device' which would create two more ins + outs being '3 & 4'.
    I also understand that would need to use the Logic I/O plug in configuring this routing.
    When treating the audio via the external hardware I particularly only want to hear the audio being processed and not the original 'uneffected' signal.
    Can someone please explain if I am able to do all of this with just the UA-25, and if so, then how.
    Cheers,
    Mr Rock

    You connect output 1 of your interface to your active speaker.
    You connect output 2 of your interface to the input of your external effect.
    You connect the output of your external effect to input 2 of your interface.
    You route your track in Logic to output 2.
    You create a new track.
    You route this new track to output 1 and output 1 only.
    You choose input 2 as the source for this track.
    You arm the track.
    You hit Record.
    You hit Stop some time later.
    Christian

  • Streaming audio from Logic 7.2

    Has anyone found a good way to stream audio from Logic to another computer via the web? I'm tweaking a sound design mix for a client in another city and would love to be able to get them on the phone and have them be able to participate in real time. Where's the Rocket Network when you need it? : )Thanks.

    2 solutions:
    1. Old school: get a telephone coupler and send the mix down the phone line.
    2. iChat: feed your mix into a small mixer, open a mic when you want to talk, and feed the mix into your "line input" on iChat (make sure it's selected in preferences) and do an audio chat.
    DP800 G4/1 Ghz Ti PB 15"   Mac OS X (10.4.5)  

  • When I upload audio from itunes into my imovie project, it does not show all of the track?

    Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
    this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
    I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
    When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
    I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
    I have spent 10 hours trying to rectify this problem.......
    can anyone help me with this problem
    Peace, Love & Happiness
    Jayondrums

    Sounds like your talking about iMovie for Mac?
    This is the iOS version, repost here:
                                                      iMovie

  • How to record video or use screen capture WHILE capturing audio from Logic??

    Hi,
    I want to record my self playing guitar and singing using my mac book pro built in camera. I want the audio to come from Logic so I can add whatever effects I want to the vocals. When I say audio from Logic I don't mean recording in Logic and adding it in post. I want it to be on the fly.
    What I used to do was use the screen capturing program Snapz Pro. I would screen capture a box around photobooth for the video, and then record while having Logic's audio in the background. It screen captures my entire computers audio. So for example if I get an aim message the bleep would show up in the recording. Or if I raise the volume or lower it the little click sound fx would be in it as well.
    Capturing the audio this way let me get Logic's audio effects in my video on the fly. It worked out great....until now! :/
    I just got the audio interface "Duet 2". And am using a microphone instead of my mbp's built in one. When ever I tried to record and capture my systems audio - my entire computer would crash. Snapz Pro won't work with the system audio with the interface. It works fine without it though.
    I then tried to use Quicktime's new movie recording feature. I see it only gives an option for microphone and now system audio. So I got soundflower to re route the audio but that doesn't help either. This is because when you capture this way you can't hear anything while your capturing. So if I were to record a video and wanted Logics audio in it, I would have to set the output to Soundflower first. So when I record I cant hear myself which defeats the purpose.
    So my final question is, how can I record video while having Logic's audio? I don't need to record with the mic, because in Logic the mic audio is going thru the system audio with everything else.
    I would like to use a process more similiar to Quicktimes straight movie recording instead of doing an odd way like I used to screen capturing a box around the photobooth screen.
    Thanks

    use Yawcam from Yawcam.com

  • Recording Audio from Keyboard into Logic

    Hey,
    I am new at Logic and trying to figure out how to get the songs from my keyboard onto Logic. Could someone please help me out?
    Logic 8
    Fast Track Audio Interface
    Korg Triton
    Mixer
    Thanks!

    logic1080 wrote:
    That helped. Now the audio from my keyboard and computer run through the mixer.
    Still no signal in logic when I press a key on the keyboard though. Is there a special setting in logic I should be in?
    Go to *Logic Pro>Preferences>Audio>Core Audio>Devices>* select Fast Track as the input device
    Also, I only really got strong signal from the keyboard into the Fast Track interface when I previously plugged a 1/4 mono from the L/R Output of the Triton into the Guitar 1/4 mono slot of the audio interface.
    I can't understand why they should build an Audio Interface that has only 1 mono Input ,I think this can accept stereo signals depending on the jack you plug-in...but that's just me Check the manual.
    Does the Audio Interface has a control panel or something...like most of them?(You could find it in Applications)
    What selections can you make there?
    Do you think the problem is where the RCAs are located? The line outputs of the Fast Track are connected to "7L 8R" on the mixer and the ones connected to 1/4 mono cable are in "Rec Out"
    Here you mean 1/4 mono (Instrument) to the *Rec Out* of the Mixer ...yes that's fine.
    Note: When I press a key on my keyboard I get signal in the mixer. It's just not in Logic or the audio interface.
    Can you hear what the Triton's playing on the speakers?
    If not turn up the volume on the channel you have the Triton connected and the Stereo Out ...make sure that the Gain level is not too high on the Triton channel (a red light below the Gain pot will illuminate when it is )
    Have you turned the Gain knob labeled instrument on top of your audio interface...clockwise?
    Check Logic's Audio Preferences to make sure that you have the Fast Track selected as the *Input Device*
    And supposedly that is a mono input ,you make sure that the Audio track you have created in Logic is a mono track(1 circle instead of two indicating a stereo) and you have enabled the record button for that track......
    Thanks!
    No probs...
    You could also check >> [Setting Up Your System|http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter =2%26section=0]
    A
    Message was edited by: immo

  • Can't import audio from .mov into iMovie 10.0.3

    When importing a .mov file with sound into iMovie 10.0.3, the audio does not import with the video. I have no sound. The file plays and sounds fine on the desktop. What am I doing wrong?
    Macbook Pro, OSX 10.9.3. 16G Ram, 768GB SSHD 2.7GHz Intel Core i7

    Hello John,
    Check out the first article for some troubleshooting steps to see if anything is preventing the audio from playing properly. Also try using QuickTime to convert the video in a different format and then import it into iMovie to see if that changes things.
    iMovie is missing audio on import, export, or playback
    http://support.apple.com/kb/ts2289
    QuickTime Player 10.x: Export a movie in another format
    http://support.apple.com/kb/PH5878
    Regards,
    -Norm G.

  • Can't import audio from clip into Premiere Pro CC.

    I can export a clip, with audio, from Premiere Pro, but when I import it back into PP the audio track is missing.  I noticed that when I delete the .xmp file from the file folder the audio will import with the clip successfully.  Can someone please instruct me as to how I can edit the .xmp file so as to correct this problem?  Thanks.

    I export a clip using the "match sequence settings".
    Mmm, don't ever use that.  It's for people who don't know what they're doing, and often causes more problems that it solves.
    Better to know what you're doing and set up your export manually.  Try that, then report back what happens.

  • Rewiring audio from Logic to Live

    Greetings..just wondering if anyone is able to give some insight on getting recorded audio and midi from Logic 8 to Ableton Live 7 ? I want to get recorded tracks in Logic transfered to audio and midi clips in Live. I need to set this up so that I can use Live for performances and triggers those clips. Sorry if this has been discussed in the past, but its a big hump for me. Any info would be great to resolve this. Thanks

    Hi,
    I would like to offer some help, should you not find the answer you are looking for here, by directing you to the following communities which has members who employ both applications in their works.
    http://www.abletonlivedj.com (register for their forums, discussions often arise concerning Logic in the context of Live.)
    and...
    http://www.logicprohelp.com (awesome site for all things Logic)
    I hope this helps you get the answers you need.
    cheers

  • My first question here.Is it possible to bounce live from logic into quicktime broadcaster quicktime streaming server?o

    I would like to broadcast (webcast) live music only.Is it possible to live bounce from logic to quicktime broadcaster/quicktime steaming server,and thus to mobile me ?

    Thanks, Evan. Your first suggestion works - although with a lot more difficulty as the Quicktime Pro I have is 5.0 and in Mac OS 9.2. If I listen to it in QuickTime Pro 5.0 after exporting - it is very jerky but the final AIF is okay. I can now burn the CD in iTunes. I probably should upgrade to QuickTime Pro 7 (.whatever) but I am leary about putting out the extra cash if it won't export Midi Files. Any experience with that?
    Also, I do want to get the hang of converting midi data to audio in LE7.01. That way I can add singing to the songs for the beginner students to learn.
    Maybe I'll have a better feel for that once I finish the Training Series book.
    Some of the advantages of keeping it in midi format is the ability to transpose. Some students don't sing in the key the works are written in.
    Your second idea did not work for me. Maybe because I don't have Toast on this computer (it was attached to my iBook). When I opened Toast, chose AUDIO and dragged the midifile to it, it rejected the offer as not being in Audio format.
    Thanks so much for your help.
    iMac G5 1.8 GHz 768 MB RAM OS 10.3.9 M-Audio MobilePre USB, Midiman connecting to Roland KR370, LE7.01

  • Export my audio from iPod into organized folders with menaninful filenames

    Hello,
    I want to "export" my audio from the iPod to my hard drive. A mere copy-and-paste (or drag-and-drop) will not do because on my iPod, the music is scattered in special folders and have special names, thanks to iPod's special way of syncing. How can I export my stuff from iPod into nice human-workable folders and filenames, just as things were when I synced audio from my hard drive to the iPod?
    If you could recommend FREE software, I'd appreciate it.

    Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Other free programs are Pod Player, SharePod and Floola and iDump and iPodRobot.
    (and I'm assuming here that "other OS" means Windows)

  • How would I record audio from iphone into computer?

    i was wondering if anybody could help me.
    i want to hook up my ipod to my computer and record the audio from the iphone
    how would i go about doing that?

    The OP would like to "record audio from the iPhone", not copy audio files across.
    Once we find out which audio (existing files or live through the mic) we'll be able to offer suggestions.
    For exisatinf audio, the first choice is obviously iTunes and sync, but I suspect it's the latter, in which case I'd recommend the free app: Megaphone Free.
    It directs the sound picked up by the microphone to the headphone socket, so you can then just record the Line-in signal on the Mac.

  • Problems outputing audio from FCP into a mini dv

    hi there
    i'm trying to output a video with 2 diferrent audio channels into a minin dv through a camera. everything is fine during output but when i check the tape the audio skips and sometimes sounds a little bit squeaking. i exported everything as .mov and imported back into FCP. so im outputting everything already rendered.
    does any one have an idea why this is happening?
    thank you.

    Could definitely be a problem with the camera, but... the most obvious thing is that your output from fcp doesn't match the format on the camera. Make sure that both are set to 48k 16 bit and that your camera is recording SP.

  • No audio from logic?

    I have a project that just stopping putting out audio - I have tried unsoloing everything- and nothing.   I was working on a bass part triggering my MOX* Yamaha- which has been working fine-  I set up a track for external midi assigned midi channel 1 and record audio out from the keyboard- all of a sudden the track would only play a few of the notes back- when i copied that track to a software instrument track- all notes played fine -.  Then Logic just stopped making sound all together??
    has Apple stopped doing updates for Logic 9 witrh mavericks

    When you switched from "built in audio" to "fast Track" that must have been in the Audio Midi setup of the utilities folder?
    You have to do it in Logic as well places.
    In case you haven't done that in Logic I will go through the steps.
    Inside Logic go to the Audio menu at the very top (not the smaller audio on the arrange screen), then Audio Hardware and Drivers, then you will see the tab for drivers there and should be pretty much the same as you did before. Fast Track should show up there. Notice you can also set the buffer size here as well as a tab for 24 bit recording. Or at least you can in Logic Pro. I don't actually have Logic Express, but I know your issue is were it is in LP.
    Best
    Robyn

Maybe you are looking for