Audio from one event posting to another video?

I'd like to use audio from one event and use it for the audio of another movie. I've done it before, but simply can't find the info or remember just how I did it last time. Does anyone know how to do this?

ooooh, I figured it out! Sorry for the posting.

Similar Messages

How do I move a video clip from one event folder to another?

Today I imported a bunch of old VHS based analog videos. I imported them all into one event library folder.
Now I want to move some of the clips into a new event folder so I can keep all the folders properly organized with what is in them.
When I highlight the selected video clip (I put the yellow border around the video I want to move) and I drop and drag the clip into the new folder imovie 11 asks if I want to move the selected clip. I answer yes, it seems to move the clip BUT it moves the WHOLE CLIP NOT just the part I selected.
I can't seem to make a cut in the video and separate it out.
How do I get the video I selected into the new event folder?

The short answer is that you can't. Purchases are tied to the AppleID used to buy them. AppleID's cannot be merged, and the content cannot be transferred.

Audio from one clip overlayed on another?

OK, I hope I can explain what I am trying to do in a way that is comprehensible to anyone but me
In the middle of a clip, I want the video to cut to a second clip but the audio from the first clip to keep playing, overlayed over the second clip, then have the video cut back to the original clip. I am doing a short review of a digital camera and in the original clip I am talking about the size of the camera and for about 5 seconds or so I want the video to transition to a second clip (while still playing the audio from the first,) that shows a closeup shot of the camera, then transition back to the original clip.
Does that make sense?
Thanks
Todd

Hi Todd:
Not really that difficult to do!
Extract your audio from
I want the video to cut to a second clip but the audio from the first clip to keep playing
Split your video where you want to put the second clip.
Split the audio at the same point.
Lock the 2 newly split audio to the 2 newly split clips.
Drop and drag the video you want to insert at the split point.
Now you have:
First part of split video with first part of split audio locked
Newly inserted clip (extract any audio that is associated with that clip and delete it.)
Second half of split video with audio locked.
Now you need to movie the audio
i back
to the inserted clip. So you need to un-lock the audio and slide it back to the point where you split it.
Adjust the lengths of the clips before doing any of this and do not forget to svae, save, save along the way.
Clear as mud?
Hope not-Sue

I want to use the audio from one of my clips and the video of another can I do this?

I have two different video clips that I took from my still camera. I want to use the audio from one of the clips and the video from the other at the same time in imovie can I do this and if yes how

Yes.
First go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now, drag the clip with the Video into the project.
Drag the clip with the Audio and drop it on the first clip at the frame where you want it to begin. A popup menu should appear. Choose Audio Only. You may then want to open Inspector for the video clip (by clicking the little gear icon at the top left of the clip) and going to the audio tab. Here you can turn down the volume of the video clip, so that all you hear is the audio clip.
Another way. Put the video clip that has the Audio you want in first. Then drag the clip with the video you want and drop it on the clip that has the audio you want. A popup menu will appear. Choose CUTAWAY.

How do I move clips from one Event to another?

How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How can i leave audio from one clip playing, while showing another one in i

i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
[See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

Moving events from one iPhoto library to another

I want to move some events from one iPhoto library to another. Does anyone know that this is possible and if so, how do I do it?

iPhoto cannot do it . The full version of iPhoto Library Manager can transfer events between libraries, or Aperture can do this.
You can download iPhoto Library Manager here: iPhoto Library Manager
If you want to save the money for additional tools, doit manually:
Export the photos from each event you want to transfer to a folder.
Import the folders with images to your other iPhoto library.
You have to make up your mind, if you want to move the original files to your other library or the edited versions. Only exporting the original files instead of the edited files will preserve the full quality. Actually, you want to export both. Using iPhoto library Manager will ensure, that both will be transferred and paired as one photo.

In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section. After doing so, I received a message that my event is already open with the same identifier as the new one I just creat

In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section. After doing so, I received a message that my event is already open with the same identifier as the new one I just created on the new disk. It says the second document cannot be opened and to move one of these documents out of your Final Cut Events folder. It also says to avoid this problem, copy events from within Final Cut Pro, but that is what I did in the first place. What should I do to avoid the double opening conflict?

What exactly are you doing and what version are you using with OS X 10.8?

How can you take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in.

As the title says I need help on how to take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in. Right now when I want to move a picture from one event to another I drag it to my desktop then delete it from iPhoto then I drag it back into iPhoto and put where I want it.An example would be taking a photo from the Christmas event and add it to a specific person event. Can I do that within the events section without all the dragging. Also is there anyway I can remove duplicates from iPhoto without going through each and every file. Any help would be greatly appreciated.

Apple doesn't make it easy to do what you want. However, here's how I do it.
Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to.

How do I move selected photos from one event to another in iPhoto

Using iPhoto 9.5.1, how to I move selected items from one event into another event. I do not wish to merge both events. Thanks.

select the photos and flag them - then select the target event and use the add flagged photos to selected event command
LN

Adding and removing current user from one SharePoint group to another with event receiver

hi friends
i need to change current user from one SharePoint group to another with list item adding event receiver.
please help me

Hi Malli,
Greetings. Its nt possible
http://sharepoint.stackexchange.com/questions/42286/event-receivers-on-add-remove-users
Please remember to click 'Mark as Answer' on the answer if it helps you

I want to move a picture from one event to another...how do i do this

i want to move a picture from one event to another...how do i do this

Just select, don't open, the event you want to move the flagged photos to. Then the Events ➙ Add Flagged Photos to Selected Event menu will be active.
OT

Moving Photos from One Event to Another

I don't entirely understand how to do this. When I want to move photos from one event to another, I usually just drag the photos from one event to another. This works fine when the two events are next to each other (within the same window). However, it he event is not in the same window (requiring a scroll up or down) then the drag and drop can't happen (i.e., having to drag photos from my last event to the first event). Any suggestions here?

If you're merging two Events you ca do this in Event View - just drag one Event to the Other and they will be merged.
If you're moving pics from an Event to another (but not a Full Merge):
Photos View, the go View -> Event Titles and option Click on the wee triangle to close all the Events.
Then open the Event you want to get the Files From. Select the Files.
Drag them to the bottom of the iPhoto Window - above the toolbar - and the Window will scroll. (There's a bit of a knack to doing this: there's a sweet spot just above the tool bar. Get the Cursor there and the window will scroll. With practise you can even control the rate and speed of scrolling)
Drop them on the target Event.
Regards
TD

IPHOTO 11 does not allow me to move photos from one event to another.

I recently upgraded to IPHOTO 11 and now I cannot Cut/Paste photos from one EVENT to another, I cannot flag a photo and move the photo to another EVENT. It will only allow me to create a new Event from the the flagged photo's. IS there a bug in IPHOTO11 and can I back out if this problem is not resolved?

Make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select options #1, #2 and #6.
Fix #3
Rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Using iPhoto, I want to move photo from one event to another I export it to desktop and then reimport. Titles and other info vanish; only the original jpg number comes thru. How do I avoid this?

Using iPhoto, I want to move photo from one event to another I export it to desktop and then reimport. Titles and other info vanish; only the original jpg number comes thru. How do I avoid this?

Don't do that - flag the photo and go to the target event and use the add flagged photo to selected event command to move it intact within iPhoto
LN

Audio from one event posting to another video?

Similar Messages

Maybe you are looking for