Audio from video clip comes though even after it has been removed

I have detached audio from my movie clips and they still come though on some clips after I share to iDVD. I then muted them and they come through, I then just move them to 0 volume and they still come through. It was working in iMovie and then when I shared it would come through. Only after I shared. Now it is happening in iMovie. I have spent days on this. Any help would be grateful.

Yes, on the speed slider you will see tick marks at the presets. I think they are 25%, 50%, 100%, 200%, 400%, 800% but there may be some more.

Similar Messages

Compressor/BatchMovnitor won't stop even after file has been removed?

I was trying to compress a 12 minute FCS file and it said it would take 1200 hrs. so I figured I'd better stop and try again. I hit Cancel in Batch Monitor but it kept going anyway, so I quit and re-started and the same file showed up again even though I didn't place it in a new batch or anything. I deleted the preferences for Compressor and BatchMonitor and re-started and it still shows up - says it's "canceling" but never cancels. How do I stop this from happening and get rid of it?

In classiclly typical fashion , immediately after posting (after searching compressor topics) I searched under Batch Monitor and found a bunch or similar problems. The answer came by deleting a file from the Qmaster folder. Now it appears to be working "normaly" again.

Extracting audio from video clip to use as narration?

Hi there,
I have a video clip in which I want to take the audio of actor speaking and put it onto another video.
I.e. he is speaking about walking in the park. I want to take him speaking about walking in the park and put it onto the clip where he is actually walking in the park.
How do I do this in premiere elements 10?

Hi Bill,
Thanks for the quick response. I guess my question now is how would I do those two things?
In terms of exporting the audio, where can I find that option when I'm on timeline?
What do you mean by "Alt-click" and what is a "muxed file"?
Thanks again,
Mallory
Date: Fri, 13 Jan 2012 19:01:51 -0700
From: [email protected]
To: [email protected]
Subject: Extracting audio from video clip to use as narration?
    Re: Extracting audio from video clip to use as narration?
    created by Bill Hunt in Premiere Elements - View the full discussion
Welcome to the forum. There are several ways to accomplish this, and your choice might well rest on how you like to work, and what you are doing, such as Deleteing Video. First, you could Export/Share just the Audio as a PCM/WAV @ 48KHz 16-bit, from your Timeline, and Import that into a New Project, where the Audio WAV file would be used. OTOH, you could Atl-click on the Video portion of the muxed file, and Delete the Video, leaving only the Audio portion. Good luck, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4139273#4139273
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4139273#4139273. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Detaching audio from video clips

Hi
After trying the standard 'detach audio' button I cant seem to find a way to completley detach audio from a clip in order to hear the track I have added to the clip. All I can seem to do is turn the volume right down, and inturn still able to hear it, which is proving annoying!
Any ideas would be appreciated!
Thanks

Thanks for your reply Geoff,
I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
So frustrating, but Im sure thats its something real basic that I am missing.....

Audio from video clips

I tried combining video clips into one movie through imovie, the video was there but not the audio from the clips. What can I do to fix this?

The conversions played sound in QT, but no sound in the editor... What can I do so I don't lose the audio?
Open the Event file(s) with the QT Player and check the "Inspector" window to make sure the file, as imported to iMovie '08, still has its audio track in tact. If it does and the missing audio is limited to scrubbing Event files, check the audio switch under the preview window to see if it is off. If no audio is present in normal playback/preview mode, then thumbnails could be bad and you might try re-thumbnailing the events. If the problem is on the project side, try duplicating the project and see if the duplicate has sound. If you still don't have audio, try trimming the duplicate project to a very short sequence and exporting it to see if the output has audio. This assumes you have audio everywhere else and it is not a system wide problem like muting, system sample rate switched to a different setting, system volume turned down, etc...

No audio from video clips

I am only getting audio from the clips when I first start a sequence. When i drag it in the new iteam box in the project window in Premiere pro cc.

1st, More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
2nd, What are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Audio From Video Clip

I want to use and save as a mp3 only the audio from a video clip. I've detached the audio and
tried deleting the video file but both the audio and video clip is deleted.

Pinchemac wrote:
I want to use and save as a mp3 only the audio from a video clip. ..
MacOs doesn't support mp3 as an export-format. so, this is a two-step process:
• in iM, 'Export with Quicktime' your project, choose 'aiff' as Export option (=audio only)
• import that file into iTunes, which has to be set in its Prefs to 'convert imports to mp3'
you'll find the resulting .mp3 by ctrl-clicking on your track in iTunes, 'Reveal in Finder'.

My company email is starting to save numerous drafts of the same email even after it has been sent

Earlier today my company email (set-up in Mail) started saving numerous drafts of emails even after they have been sent out? Any idea why this is-I have talked to the service provider and they have led me to believe it is an Apple issue

There is no anti-malware for iOS, at least none that actually does anything useful. The odds of getting any malware infection via an email attachment on an iOS device is quite low - practically non-existent. Unless you are seeing any issues, there isn't much to do, other than deleting the email and being more cautious in the future.

Audio from video clip and layering

ok, I need help! I finally figured out how to take audio from a video clip and place it over pictures or layer it over other audio. Now, I want to start with a video clip, it happens to be an interview, cut away to some pictures or other muted video, and come back to the interview, all with the audio playing the whole time and lined up correctly....how do i do this? THANKS!!

Thanks David
I found this here http://www.apple.com/findouthow/movies/#tutorial=extendaudio
To extend audio across multiple clips:
1. In the Project area, select the clip that contains the audio you’d like to extend into a second clip. Select the last few seconds of the first clip that contain the audio you want.
2. To split the first clip, choose Edit > Split Clip.
3. Control-click the selected clip and choose “Reveal in Event Browser.”
4. In the Event browser, Command-Shift-drag the clip to extract the audio and place it at the start of the next clip.
5. Delete the video portion of the clip you split in step 2.
Because you’ve extracted the audio from exactly the part of the clip you split, the audio seamlessly plays across the next shot
I am going to try this tonight and see how easy it is

Separate audio from video clip in ios imovie?

I'm thinking this is impossible w iMovie app? I want to extend audio from clip into next clip but cant separate to control. Do I need to go btw FCPx & IOS apps?

IOs is not a desktop replacement, and I think apps (especially video editing apps) will not rival or be as powerful as desktop apps anytime soon.
THat said you should look at other video ending apps out the and you will see there is much more powerful editors then iMovie.
Just as iMovie is a weak editor on the Mac (compared to avid or FCP), it is a simple video app on ios.
YOu cannot compare iMovie iOS with FCP, just like you can't compare iMovie Mac with FCP.

Audio from video clips not playing

this is weird, the audio associated with my video clips plays in the viewer, all the audio wave are present, but they are not all playing with the time line. one clips audio starts playing then cuts out. All my other tracks (music) are playing good. I have tried selecting and deselecting, and mute, also tried restarting, rendering and unrendering, and everything else mentioned in other similar cases with no luck. I am running a system with an inadequate graphics card, but this is audio right, simple right?

If your audio is 32 bit, then it's not 16 bit.
You audio will need to match your sequence settings. You are likely looking for audio to be 48Khz/16bit
Take the offending piece of audio and export it with the appropriate settings to match your sequence.
1 Select your sequence, then choose Sequence > Settings.
2 Check the sample rate of the sequence in the Audio Settings area of the General tab,
then click OK.
3 Select the offending audio clip in the Browser that you want to convert to a new sample rate.
4 Choose File > Export > Using QuickTime Conversion.
5 Choose AIFF from the Format pop-up menu.
6 Click Options.
7 In the Sound section of the Movie Settings dialog, click Settings.
8 In the Rate pop-up menu, choose the sample rate of your sequence, then click OK.
Make sure the size is kept at 16-bit.
9 Click OK.
10 Choose a new name and location for the new file, then click Save.
Once the conversion is complete, you need to import the new media file into
Final Cut Pro.
11 Import the newly converted audio media file, and use that as the audio portion of your clip.

Extract Audio from Video Clip

I want to extract the audio from a video clip and use it in another setting as an MP3, AVI, WAV -- or whatever. How do I do this in FCE?

Export a QuickTime movie and select Audio Only. You'll get an AIF file @48kHz. You can then convert to other formats in iTunes or other software.

Muted the Audio from Video Clip?

I have a keynote slide with a 60 second countdown on it. Problem is, that video clip has sound I don't want to use. I want to use another song. Is it possible to mute or disable the audio from the video clip, and then just insert another song?

Hi saw your post mentioning clock
I am looking for a countdown clock to show during a show, how do your get this?
I have an old version iwork 06
as to your question, the way I do this is to swap out the sound track in a video editing application-you will have iMovie
thanks

Audio from video clips in FCP X not importing into timeline

All my video clips play with sound in preview. Once I select my clip and drag it into the timeline, the audio disappears. It's not muted, In the top right information box, it only says Video/Info.
I have instrumental music playing in the background, but I would like a specific clip to play with sound, and it's just not working out. Am I doing something wrong?

Is the timeline set to edit source video and audio?

Apple TV is requesting payment verification constantly, even after it has been confirmed multiple times, why will this not stop?

Apple TV has gone off the deep end and is constantly asking me to re-verify my paymetn info... I do it time and time again and the message never stops. It pops up alomst anytime I do anything... When I first got the apple TV I only had to do this occasionally... Now it asks multiple times a day... Any idea on how to make this stop??? To the point that I will start using another streaming device soon...

I have been able to eliminate the Verification Required problem. I believe the thing that made the most improvement happened to be an OS update on the Mac where the home share lives, but it might also be the combination of trying many fixes. The Mac was already running the latest iTunes (10.7), but the my OS (OS X Lion, 10.7) was not patched all the way up to 10.7.5. I am not running Mountain Lion. My Mac is a Mini, 2 GHz Intel Core 2.
I applied the OS patches, after having changed my AppleID password (more complex) and payment method back and forth, and now with all of that done, the Verification Message has gone. I do, still, have the ATV saying it can't connect to the iTunes store frequently, but that message is not as frequent and as annoying as the constant Verification Required message. Note that my ATV showing the error message about "Can't connect to iTunes Store" is on Ethernet and I believe that there is a bug with the ATV update that pertains to Ethernet connectivity which is discussed in the Support Forums on other threads (one I can recall is MLB TV not working, look for MLB, Update, and Ethernet if you want to find that).
Summary of my personal experience to arrive at a fix for Verification Required:
iTunes on host Mac is up to date (10.7)
AppleID password is complex enough (it previously was not)
Payment method was changed away to another method and then re-established, re-confirmed to my Visa
Mac OS Lion was updated to latest patches, 10.7.5
Also, for what it's worth, my Mac is also on Ethernet and my switches are all new Linksys GB switches with the exception of my Linksys WiFi/Router which is only "switching" for WiFi users and connections off of the LAN to the internet.
Best of luck to all, here. This has been terribly frustrating, and lacking any official Apple participation or even clear, cut answers from the user community. I hope my experience helps someone. You may also contact me directly at my first name at my lastname dot com.
Sincerely,
Chris Adragna

Audio from video clip comes though even after it has been removed

Similar Messages

Maybe you are looking for