Audio gets lost when sending to Premiere Pro

Hey fellow Prelude users.
I encountered a nasty problem. I ingested some AVCHD Clips in Prelude and edited them and made many, many clips out of the footage. Then I sent it to Premiere for further edit. Unfortunatly at some Clips the audio is now missing, even if there's audio in Prelude. I tried to export just the audio from Prelude to match it with my roughcut but also the export has no audio at the points where the clips with missing audio are.
When importing the Clips without the new metadata by Prelude the audio is just fine. This seems to be a pretty weird issue.
Hope you can help.
Thank you,
Alex

I have run into the same problem with AVCHD footage. Initially, I thought that the problem might involve the transfer feature in Prelude CC's Ingest function. I had used that when ingesting the problem media, to move source clips to a couple of different folders on my edit station.
I subsequently realized that probably wasn't the case, since I had logged the clips in Prelude after they were ingested. So, they had sound when I ingested them, but not later, when I imported them into Premiere Pro CC.
The audio loss was complete on one clip--no sound at all on the clip or subclips when I opened the clip in Premiere. The audio loss was partial in the other clip--the audio level flatlined about three-quarters of the way through the clip. Each clip was about twenty minutes long--an interview with a subject for a documentary I'm shooting. I set subclips for each response that I planned to use in my cut of the film.
I keep my source cards as backup, so I was able to go back and re-ingest, this time without using the transfer feature. Instead, I copied the source card to my edit station, using Windows Explorer. Then I used Prelude ti ingest and log the copied media. That appears to have imported into Premiere without problem.

Similar Messages

  • How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

    I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro.  I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
    The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
    But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
    I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

    I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done.  Need to add Audition to the long list as well I suspect. Fun times!

  • Can't get my MacBook audio to record audiio in CS6 Premiere Pro ?

    Can't get my MacBook audio to record audiio in CS6 Premiere Pro ?
    Am i missing something here ?    It's telling me Premiere Pro is using the aggregate audio device,
    though not sure what that means ?
    thanks!

    If your model number isn't showing up in Printer Setup then you need to install the drivers. After you do that you should be able to setup your printer and print OK. Make sure Appletalk is checked in Airport in your Network Pref Pane.

  • I get an error when I open Premiere Pro (CS4)

    Hi guys i hope you can help me :)
    When i open Premiere Pro the Windows
    opens normally and starts loading the
    program parts. then i get the following
    error message:
    Premiere Pro has encountered an error. [..\..\Src\ImporterProcessClient.cpp-127]
    i don't know why ?? please help me ;)
    greets mark

    Eddie, <br /><br />Thank you for your update. When it crashes, I did submitted the crash Report to Adobe, so, you should have all the information you need. See below the copy of the crash report. <br /><br /><?xml version="1.0"?><br /><!DOCTYPE crashreport SYSTEM "AdobeCrashReporter.dtd"><br /><crashreport version="1.1" crVersion="3.0.20080806" applicationName="Adobe Premiere Pro CS4" applicationVersion="4. 0. 1. 0" build="unknown"><br /><time year="2008" month="12" day="21" hour="18" minute="38" second="3"/><br /><user guid="c118a540-9d5f-4415-ab8b-b1c6e3906423"/><br /><system platform="windows" osversion="6.0.6001 SP 1.0" applicationlanguage="Language Neutral" userlanguage="en_US" oslanguage="en_US" ram="3325" machine="Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz" model="x86 Family 6 Model 15 Stepping 6" cpuCount="2" cpuFreq="2330 MHz" busFreq="" locale="English (United States)"/><br /><crash exception="EXCEPTION_BREAKPOINT" instruction="0x00c2dd10"><br /><backtrace crashedThread="0"><br /><thread index="0"><br /><stackStatement index="0" address="0x00c2dd10" symbolname="dvacore::debug::DVA_DebugBreak"/><br /><stackStatement index="1" address="0x00cb197a" symbolname="dvacore::utility::ThreadSafeMessageDialog"/><br /></thread><br /></backtrace><br /><registerSet><br /><register name="EAX" value="0x00000000"/><br /><register name="EBX" value="0x00000000"/><br /><register name="ECX" value="0x00000000"/><br /><register name="EDX" value="0x00000000"/><br /><register name="ESI" value="0x00cb177e"/><br /><register name="EDI" value="0x00000000"/><br /><register name="ESP" value="0x0012f2a0"/><br /><register name="EBP" value="0x00000000"/><br /><register name="EIP" value="0x00cb197a"/><br /><register name="EFL" value="0x00000246"/><br /></registerSet><br /><binaryImageSet><br /><binaryImage start="0x00400000" end="0x004fa000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;Adobe Premiere Pro.exe"/><br /><binaryImage start="0x77910000" end="0x77a37000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;ntdll.dll"/><br /><binaryImage start="0x762e0000" end="0x763bb000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;kernel32.dll"/><br /><binaryImage start="0x10000000" end="0x10010000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;CrashReporter.dll"/><br /><binaryImage start="0x718b0000" end="0x7198c000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;dbghelp.dll"/><br /><binaryImage start="0x768a0000" end="0x7694a000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;msvcrt.dll"/><br /><binaryImage start="0x77710000" end="0x777d6000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;advapi32.dll"/><br /><binaryImage start="0x767d0000" end="0x76892000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;rpcrt4.dll"/><br /><binaryImage start="0x75850000" end="0x75858000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;version.dll"/><br /><binaryImage start="0x00170000" end="0x0017f000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;LogUtils.dll"/><br /><binaryImage start="0x76ab0000" end="0x775c0000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;shell32.dll"/><br /><binaryImage start="0x763c0000" end="0x7640b000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;gdi32.dll"/><br /><binaryImage start="0x77ad0000" end="0x77b6d000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;user32.dll"/><br /><binaryImage start="0x76280000" end="0x762d8000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;shlwapi.dll"/><br /><binaryImage start="0x775c0000" end="0x77704000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;ole32.dll"/><br /><binaryImage start="0x728e0000" end="0x7297b000" type="__TEXT" path="C:&#92;Windows&#92;winsxs&#92;x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.143 4_none_d08b6002442c891f&#92;msvcr80.dll"/><br /><binaryImage start="0x72660000" end="0x726e7000" type="__TEXT" path="C:&#92;Windows&#92;winsxs&#92;x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.143 4_none_d08b6002442c891f&#92;msvcp80.dll"/><br /><binaryImage start="0x00c00000" end="0x00d55000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;dvacore.dll"/><br /><binaryImage start="0x769a0000" end="0x76a2d000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;oleaut32.dll"/><br /><binaryImage start="0x001a0000" end="0x00229000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;ASLFoundation.dll"/><br /><binaryImage start="0x74980000" end="0x74b2b000" type="__TEXT" path="C:&#92;Windows&#92;winsxs&#92;x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.60 01.18065_none_9e7abe2ec9c13222&#92;GdiPlus.dll"/><br /><binaryImage start="0x760f0000" end="0x760f7000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;psapi.dll"/><br /><binaryImage start="0x00240000" end="0x00246000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;PRM.dll"/><br /><binaryImage start="0x6ef50000" end="0x6ef6e000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;shimeng.dll"/><br /><binaryImage start="0x75fc0000" end="0x75fec000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;apphelp.dll"/><br /><binaryImage start="0x6de60000" end="0x6dee8000" type="__TEXT" path="C:&#92;Windows&#92;AppPatch&#92;AcLayers.dll"/><br /><binaryImage start="0x76040000" end="0x7605e000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;userenv.dll"/><br /><binaryImage start="0x76020000" end="0x76034000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;secur32.dll"/><br /><binaryImage start="0x733b0000" end="0x733f2000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;winspool.drv"/><br /><binaryImage start="0x75bf0000" end="0x75c04000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;mpr.dll"/><br /><binaryImage start="0x76190000" end="0x761ae000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;imm32.dll"/><br /><binaryImage start="0x76700000" end="0x767c8000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;msctf.dll"/><br /><binaryImage start="0x77ac0000" end="0x77ac9000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;lpk.dll"/><br /><binaryImage start="0x764f0000" end="0x7656d000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;usp10.dll"/><br /><binaryImage start="0x74ed0000" end="0x7506e000" type="__TEXT" path="C:&#92;Windows&#92;winsxs&#92;x86_microsoft.windows.common-controls_6595b64144ccf1d f_6.0.6001.18000_none_5cdbaa5a083979cc&#92;comctl32.dll"/><br /><binaryImage start="0x003c0000" end="0x003d4000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;Startup.dll"/><br /><binaryImage start="0x023a0000" end="0x024dc000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;adobeowl.dll"/><br /><binaryImage start="0x024e0000" end="0x027e2000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;UIFramework.dll"/><br /><binaryImage start="0x027f0000" end="0x028d8000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;ImageRenderer.dll"/><br /><binaryImage start="0x7f840000" end="0x7fa07000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;MCDVD_32.DLL"/><br /><binaryImage start="0x74800000" end="0x74832000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;winmm.dll"/><br /><binaryImage start="0x74720000" end="0x74759000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;oleacc.dll"/><br /><binaryImage start="0x76a30000" end="0x76aa3000" type="__TEXT" path="C:&#92;Windows&#92;System32&#92;comdlg32.dll"/><br /><binaryImage start="0x00f70000" end="0x00f9b000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;dynamiclinkui.dll"/><br /><binaryImage start="0x022d0000" end="0x02350000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;dynamiclink.dll"/><br /><binaryImage start="0x00fc0000" end="0x00fe1000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;processcoordinationclient.dll"/><br /><binaryImage start="0x011f0000" end="0x011f9000" type="__TEXT" path="C:&#92;Program Files&#92;Adobe&#92;Adobe Premiere Pro CS4&#92;proce

  • I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro

    I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro. what do i do now?

    Do a clean (re)install:
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • When you install Premiere Pro as the admin on an iMac the audio functionalities work well but a second admin account on the same machine does not work. What can I do to fix this?

    When you install Premiere Pro as the admin on an iMac the audio functionalities work well but a second admin account on the same machine does not work. What can I do to fix this?

    It is a bad idea to hack computer passwords when you don't own the computer
    Good luck with the school and the parents.

  • 99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

    I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

    Thanks, I'm a bit new to asking for help!
    Version : Premiere Pro CC 2014.2 (8.2)
    It is up to date
    I'm using Windows 8.1 build 9600
    My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
    After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
    I have never had such a problem with the program which makes me think it might have something to do with a recent update.
    No other notable software was running during the export.
    I don't have any third-party effects or codecs installed.
    I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
    Unless it was installed in the trial, I do not have the Mercury Playback Engine.
    And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
    Thank you for the help! Any suggestions?

  • Phantom Flex footage dark when imported to Premiere Pro

    Hi everyone (and hopefully Adobe Staff, also),
    I am aware this has been posted before, though from what I can see no one, Adobe Staff or users, have found a solution. I am hoping we can change that!
    I recently directed a Music video that was shot on the Phantom Flex. Everything went smoothly and after dropping the 3TB of footage via Seance (program by gluetools for Mac) I am now faced with a problem. While all the footage looks fine in Seance and on the Finder; when imported to Premiere Pro (CC v8.1, Caravan (latest update currently) it goes very dark, blue and flat. Premiere Pro is interpreting the colour/luma of the footage wrong.
    Adobe states that Premiere Pro supports Phantom Flex .cine files but it seems that while you can edit with them, the colour/luma is interpreted incorrectly. Many other people also seem to have this problem.
    These images below are all screenshots from Macbook Pros, one with ‘Glue Tools Phantom Cine Flex 4K’ installed (the gear house’s laptop) and one without (mine).
    I need to find a way to get Premiere Pro to interpret the colour/luma properly in Premiere Pro to edit the project, it seems the Glue Tools plugin is not the solution I was hoping for, as some people have suggested elsewhere.
    Is there a way to fix this within Premiere Pro or a plugin etc?
    Has anyone successfully edited Phantom Flex footage in Premiere Pro?
    Any help would be extremely helpful as I am really stuck here.
    Thankyou so much.
    Here is an example with some footage shot by the crew before me (still left on one of the cards), as you can see it is not just my footage that isn't working in Premiere Pro.
    Thankyou,
    Jack

    It looks to me like Seance (and Finder) are applying a LUT to the footage, whereas PP is showing you the flat image as it was actually recorded, which is normally the desired result.  Was there a LUT applied in the camera viewfinder or on-set monitor, something you might also apply in PP?

  • Rough Cut "send to Premiere Pro" opens PP but no files.

    "send to Premiere Pro" opens Premiere Pro but the project is empty.  
    Also "append to rough cut" in Prelude is grayed out/unavailable.
    I have uninstalled and reinstalled both Prelude and Premiere Pro but nothing has changed.
    Checked for updates and there are none.
    OS 10.6.8
    Premiere Pro 6.0.2
    Prelude 1.0  

    Do you have the Rough Cut open in the timeline panel? If the Rough Cut is closed the Append to Rough Cut command will be greyed out.
    Does the File>Export command work to create a Premiere Pro project?
    When you try the Send to Premiere Pro command and it fails, do you see any errors in the Window>Events panel?

  • Media Encoder crashes when exporting from Premiere Pro

    Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
    Any idea why Media Encoder will crash?

    Try turning off GPU acceleration.

  • Bridge CC crashes when opened in Premiere Pro CC

    Bridge CC tends to crash regularly when open in Premiere Pro CC. Sometimes it takes longer to crash than other times. sometimes it doesn't crash at all but it appears if I leave both programs open for an hour and then come back to work on a job it will crash in the middle of looking at footage to import into premiere. Is this a bug or is there some way to fix it on my computer?

    Need more info.  What OS and ram?
    Bridge is a processor intensive program and if processing video in Pro CC it could starve computer for resources.

  • Help! I am getting this error message in Premiere Pro 4

    Help! I am getting this error message in Premiere Pro 4
    [/belding/mediaCore/MediaLayer/AudioSupport/Make/Mac.../.../src/Mac/CoreAudioHost.ccp-1623
    Does anyone know what this means?
    I am using a very new IMac and running the latest apple os
    Thank you

    answer probably here
    http://forums.adobe.com/message/1826019

  • Captured video using Premiere Pro CC on MAC, wont import when moved to Premiere Pro CS6

    Using a Captured video on Premiere Pro CC on my Macbook air, my video wont import when moved to Premiere Pro CS6 when i try to edit it on a pc (Windows 7)
    When I try to import the file into CS6 it says *error while decompressing file*
    If anyone has any idea what could have happened or what I might have done wrong please reply.
    Joseph

    mojo,
    Do you have QuickTime and the associated codecs installed in your PC?
    Thanks,
    Kevin

  • Can Waves audio plug-ins be used with Premiere Pro CC?

    Hi folks,
    As it says in the thread title, can Waves audio plug-ins be used with Premiere Pro CC?
    Cheers!

    I dont think so:
    http://www.adobe.com/products/premiere/extend.displayTab4.html
    http://www.waves.com/support/tech-specs/supported-hosts

  • When I run Premiere Pro CS5, it works for awhile then locks up

    My machine has 16gb of memory and a Intel 7 processor.  When I run Premiere Pro CS5, it works for awhile
    and then locks up for anywhere from a few seconds to over a minute.  Can anyone dignose this problem? 
    Could it be where Premiere is installed in relation to where my files are stored?
    Any help with this vexing problem would be appreciated.

    I edit AVCHD with the computer described in http://forums.adobe.com/thread/652694 and have no problems
    My 3 hard drives for video editing are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and ALL program installs
    2 - 320Gig data for Win7 paging swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folders and files
    3 - 1Terabyte data for all video files... input source & output export files
    How many hard drives do you have, and where is everything located?

Maybe you are looking for

  • Pinned tabs stay highlighted

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1029649 /questions/1029649]'' I use pinned tabs for Facebook, Twitter, and emails. The blue highlight feature for new notifications is staying on cont

  • Having trouble reading a directory

    I'm trying to read all the filenames of a specific web directory for an online photogallery. The reading is done using a custom jsp tag, which creates a js variable with a list of all the picture names. My code works fine when reading from my own PC.

  • CUPS won't allow printing in a Windows network

    I just spent five days trying to get printing working in my OSX 10.9.2 (iMac). Here's the thing: the printing network is a Windows smb network. Everything works fine on my MacBook OSX 10.9.2. I can manually install the smb://xxxx/yy printer and it wo

  • Ichat Quit Unexceptionally, Wont Even Open

    i got bought a macbook from my friend last nite and i try to open this and doesnt seem to want to open, i click the ichat icon and nothing pops up but that message that it quick..... heres the error message..... and i didnt get the cds for it either.

  • Intel vt disabled

    Hello, i have an early 2011 macbook pro and i'm using xen on it to virualize some machines. I have noticed that intel VT technology is disabled, but i can't find a way to enable it. It should be always enabled, but in my case it is not. I have made a