Audio glitch when seeking in Premiere Pro CC 2014.1 (Mac)

Don't have enough data yet for a full report but wanted to flag this to see if others are experiencing something similar.
Here's my process:
1. I have a couple tracks of audio. At some points in the timeline, there is no audio at all (e.g. after the end of my timeline).
2. Using "End" or "Down", I navigate to a cut that has silence after it (no audio clips)
3. I then use "Left" to navigate 1 frame back in time, to where there *is* an audio clip.
4. My headphones give me a staticky snap, and I think the glitch registers on the audio meters as a peak
Notes:
- The audio clip is not loud, and doesn't peak when playing normally
- Once it happens once on a particular cut, some kind of caching seems to happen so that the glitch doesn't repeat itself if I try immediately after.
I'll update this as I encounter more data.

This sounds to me like it could be a graphics related problem are you on the latest driver. Something else you could try, start a new project and import the one from the PC into that rather than directly opening it in the MAC

Similar Messages

  • Losing audio quality when exporting from premiere pro

    I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

    The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems.  Let me know if I need to do screen shots I really want to figure this out.
    Thanks for your help!

  • Premiere Pro CC 2014 keeps freezing when loading projects from Premiere Pro CC

    Hi everyone,
    I'm reporting this issue in case someone else would have the same problem.
    I just downloaded the 2014 version of Premiere Pro CC, and when I'm loading a project from Premiere Pro CC into CC2014 I have the software freezing and being unable to even play the loaded sequences. It seems that dynamic link is having trouble linking the CC and the CC2014 version of Premiere Pro.
    Until now the only solution I found was to kill the process of the software and start it again, after 8 times I got my sequence loaded alright, then sometimes it is freezing again, killing process, starting software again, and so on. Does anyone has the same problem ?
    I'm running a Windows 7 Ultimate PC with 12Go RAM dedicated only to Premiere Pro.
    Cheers,
    Vincent

    Hi Vincent,
    I feel your pain, you are not alone. Here are my machine specs and my very frustrating situation, if anyone has any idea as to how I should move forward, I would really appreciate the input/advice...
    iMac - 27" Late 2013
    Processor  3.4 GHz Intel Core i5
    Memory  12 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce GTX 780M 4096 MB
    Software  OS X 10.9.4 (13E28)
    I'm having similar issues that began when I installed Premiere Pro CC 2014, and actually got worse with the latest update/release. The majority of my projects worked fine at first, but the update last week ended that quickly. I did what I know I never should do and updated Adobe CC while completing a project on a deadline. I thought some of the fixes would help me complete the project sooner. Needless to say, the deadline has passed, my client is pissed enough to not pay me or hire me again and I'm stuck with an almost-there version that I can't export correctly because of this software. This is my problem, not Adobe's, but I didn't expect such a detrimental update to halt my operation.
    After doing some research, I found that some plugins could be the cause of some specific editing issues, mainly due to incorrect or inaccessible folders - who knows if its Dynamic Link, CC apps or 2014 apps. I concluded that my issue at the time was a plugin permissions issue on the Adobe "Preference" Folder, so I reset the permissions on the folder so that CC and 2014 apps would be able to access its contents without any problems. This was the wrong decision. For some reason, resetting this folders permissions also effected the main HDD, it's Kernel Text files and their respective permission. I could not boot my machine, just got the Apple and spinning wheel until I had to power down. I ended up on the phone with 3 different AppleCare reps who helped me at least be able to turn the machine back on and access my desktop/files, apps, etc. Outside of this, no one could offer anything other than "Uninstall the problematic application, reboot, reinstall, etc..." or "Backup your files and reimage the HDD." When I mentioned the recent CUDA driver update for my graphics card (NVIDIA GeForce GTX 780M 4096 MB now running CUDA Driver Version: 6.0.51), it was like they had never heard of graphics cards being used in their machines.
    Resetting permissions on Adobe Preference Folder...
    This is what I read would get the CC and 2014 apps communicating correctly so that they could utilize my plugins. There is a problem, I believe, in that their are TOO MANY locations where Adobe folders/components live. There are 3 "Preferences" folders that I found, and I don't know which effects what process, but the folder I changed permissions on clearly effects the operation of all of the CC & 2014 apps I had installed, as well as my HDD. Kernel Extensions and the entire system.
    Based on my perceived effects of the Preference folder, I needed to uninstall everything, run the Adobe CC Cleaner Tool, download/install just the 2014 releases and see if that resolved the issue. I'm not downloading CC apps, the 2014 releases should run fine on their own. I've yet to confirm this with Adobe, as what I've read has simply said to install the new release next to the CC apps, rather than on top of, as traditional update releases work. Anyway, one by one, I reinstalled the 14 apps that I use on a regular basis on a "clean" machine with no trace of previous Adobe apps.
    After reinstalling (without any plugins), I was at least able to open Premiere Pro from the Application folder and work for a few minutes before both Program and Source monitors froze and had to force quit the app. If I try to open the Project File by double clicking it in the Finder, SpeedGrade opens up instead of Premiere Pro - never seen that before. I also had to force quit to end that process and reopen in Premiere instead of SpeedGrade.
    So back to Premiere, if I do have success in opening a project in the right application, Premiere freezes - if not immediately, eventually it will just stop responding. The video clips, sequence segments and UI freeze, but the audio will keep playing until I force quit. When I force quit, Premiere Pro doesn't close entirely. The UI closes, but the process still runs. I've even force quit from Finder, force quit again from the Dock, Shut Down the machine, restarted and Premiere Pro will still be open, but "Not Responding", so I force quit again and open the project. Just now, I opened PP, made minor edits to a sequence, sent it to Media Encoder, exported, but the video I tested exported without audio. I force quite PP twice just before that and it is still running now, but again, it is "not responding".
    Ultimately, none of this works, nor have my attempts at resolving these many issues. One thing I know is that there is something VERY WRONG with either the latest release/update to 2014 apps, the Preference folder or the permissions that were changed.
    As I mentioned previously, and what I think is a major oversight by someone at Adobe, is that for some reason the permission changes to ONE Adobe folder also effected my entire system and Macintosh HD. Some Kernel Extension files went missing, which is never good and should not happen when resetting folder permissions, so I believe my issues are far greater than the faulty Adobe CC 2014 applications, and is the cause of many of my problems right now. If I can't get things sorted soon, I'm going to reimage my HDD and start from scratch. As much as I would like to avoid this, I really have no choice if I want to get back to work and not lose clients over inexplicable technology issues.
    If I find a solution, I will repost, but I think Adobe has to make some serious fixes on this release before anything is resolved entirely. I pay them monthly and rely on their software and platform to work without issue, which is foolish - I know, but I've used CC since it was introduced and it has work well enough until now.
    Is there anyone at Adobe that can offer some advice??

  • Premiere Pro CC 2014 Startup Crash "Quit Unexpectedly"

    This morning, I take a look at Creative Cloud and there was 2 updates called "Adobe Premiere Pro CC 2014" and "Adobe Photoshop CC 2014". So, I figured, "Sure. Why not?" I updated them. So far, Photoshop still works. After Effects works too. But when I open Premiere Pro CC 2014, I get the pop-up screen, loading stuff and it just quit unexpectedly. I cleaned all of the Adobe products with the Cleaner Tool, uninstalled it, reinstalled it, opened it and it still happens. This is where it stops loading every time and quits. Also, love the artwork.
    After that, it quits unexpectedly. Here is an image of that error.
    I'm using a MacBook Pro. I don't know what to do. I really need help, guys.

    Solution:
    My graphics card did not supported the "Mercury Playback Engine GPU Acceleration (Open CL)". You can change it into "Mercury Playback Engine Software Only" in your Project Settings.
    But this is in the wrong place in my opinion. Why not in "Edit/Preferences"? I could've changed it by myself but I did not find the menu.
    Thanks Michaela from the Adobe Support Chat!

  • How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

    I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro.  I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
    The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
    But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
    I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

    I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done.  Need to add Audition to the long list as well I suspect. Fun times!

  • When clicking an audio clip on the timeline in Premiere Pro CC 2014, it duplicates it on a different track and makes it impossible to work.

    I'm experiencing a disturbing issue as it actually prevents me to do the work in Premiere. I will put as much info as possible:
    1) Project started on a different computer (the editor), PC with Premiere Pro CC,
    2) Now opened on my Imac with Premiere Pro CC 2014,
    3) I am not editing, simply trying to move audio clips on different tracks to export audio tracks only,
    THE ISSUE:
    1) Here is my timeline:
    2) When I select an audio clip to highlight it, Premiere creates a duplicate on a different track:
    Note that the clip highlighted in the previous screen cap is the duplicate and I didn't click it, Premiere highlights it as soon as it is duplicated.
    3) When I click out of the timeline or scroll up or down on the timeline, the duplicates disappear. However, when I try to move the original clips, it doesn't do anything, they are stuck in place.
    ANTICIPATED ANSWERS:
    1) You work on 2 different computers with 2 different versions of Premiere Pro CC, what do you expect? --> The amazing thing about Adobe CC is that it shouldn't be an issue and now I have to deal with it in this way,
    2) Try and save an updated version of your project from your computer. --> Already done that.
    Thank you for your help. I usually use the customer support chat but I am on the other side of the globe and it is now closed. This issue prevents me to work so I need to solve it quickly.
    Kind regards,
    Aurelien

    This sounds to me like it could be a graphics related problem are you on the latest driver. Something else you could try, start a new project and import the one from the PC into that rather than directly opening it in the MAC

  • When you install Premiere Pro as the admin on an iMac the audio functionalities work well but a second admin account on the same machine does not work. What can I do to fix this?

    When you install Premiere Pro as the admin on an iMac the audio functionalities work well but a second admin account on the same machine does not work. What can I do to fix this?

    It is a bad idea to hack computer passwords when you don't own the computer
    Good luck with the school and the parents.

  • Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

    Hello
    We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
    Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
    We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
    The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
    It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
    Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
    Dennis
    (Workstation:  Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
    Mediainfo of the P2-Cards:
    General
    Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 3.92 GiB
    Duration                                 : 2mn 28s
    Overall bit rate                         : 227 Mbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Video
    ID                                       : 2
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : High 4:2:[email protected]
    Format settings, CABAC                   : No
    Format settings, GOP                     : N=1
    Format settings, wrapping mode           : Clip
    Codec ID                                 : 0D01030102106002-0401020201323104
    Duration                                 : 2mn 28s
    Bit rate                                 : 227 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 50.000 fps
    Standard                                 : Component
    Color space                              : YUV
    Chroma subsampling                       : 4:2:2
    Bit depth                                : 10 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 2.193
    Stream size                              : 3.92 GiB (100%)
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Mediainfo Audio-Datei P2-Card:
    General
    Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 13.6 MiB
    Duration                                 : 2mn 28s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 770 Kbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Audio
    ID                                       : 3
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, wrapping mode           : Clip (AES)
    Codec ID                                 : 0D01030102060400
    Duration                                 : 2mn 28s
    Bit rate mode                            : Constant
    Bit rate                                 : 768 Kbps
    Channel(s)                               : 1 channel
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 13.6 MiB (100%)

    Hi,
    we have the same problem!
    It is not possible to play audio with the AVC-Intra100 Codec fluently.
    Can anybody help?
    Thanks,
    Anja

  • Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

    So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
    As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
    So, what happens is this:
    1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
    2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
    3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
    4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
    Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
    Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
    I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
    Mandatory system info:
    Windows 7 Professional SP1 (64-Bit)
    Intel i7-3820
    32GB RAM
    Nvidia GTX 980 (350.12)
    Premiere Pro CC 2014.2

    Update:
    I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
    Pretty bizarre.
    The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

  • Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

    When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE.  Only if I alter the Video track does it then take the changes reflected.  Any suggestions as to what is causing this?
    Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

    As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
    Neil

  • I am trying to screen capture a simulation session in captivate 6 and then edit it in premiere pro cc 2014 when I import the video into premiere, it is blurry

    Caveat - I am relatively new to adobe captivate and premiere, so hopefully this is a simple setting issue that I have not been able to figure out.  When I do a video capture in captivate 6 the output mp4 is very clear.  If I play it in windows media player it is crisp and clear.  If I import that same mp4 into Premiere Pro CC 2014, it is very blurry.  My simulation has gauges and dials that need to be clear and I need to "mix" audio, narration, and system sounds into this video.  Any help would be extremely appreciated!

    OK - back to my caveat.  When I select preferences in Premiere and look at the playback setting, I get options for Preroll, Postroll, Step forward/back many, mercury transmit, Audio device, Adobe DV and disable video output when in backgroud (all of which I am not smart enough to comprehend). 
    I apologize for my ignorance. So as I continued to read your question, I, of course googled "how to set playback resolution in premiere pro" and I learned how to do that....  They were set to 1/2.  I adjusted to full and it seems to be clear now....  I think you just helped me, help myself.  Thank you!  Did I get it right?  Is there any more you can recommend when it comes to taking a screen capture video and making it into an awesome demo?
    Thank you, Thank you, Thank you,
    Troy

  • Premiere pro CC (2014) problems with audio on .mts files

    Hi,
    This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
    Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
    Thanks!

    Hi amber1992,
    I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
    MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
    Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
    Once done launch the project again and check.
    Regards,
    Vinay

  • Premiere Pro CC 2014 QuickTime Audio and Video Syncing problem

    Hi everyone,
    I am having and issue when I import QuickTime video into Premiere Pro CC 2014. I've just started doing some editing so I am very new to all of this. I recorded video in Photo Booth on my mac. I exported the file to a .mov file and imported it in to Premiere. When I play the file in premiere everything is fine up until halfway through the video. The video starts to play faster than the audio and everything is off. When I play the video in QuickTime everything is fine. I don't know if I did something wrong when I imported the file but I am hoping for some help. Thank you.

    I would be willing to bet the video is recorded as VFR, variable frame rate ... in other words, it creates more frames per second when it needs to for keeping up with screen changes, and less when it doesn't see much changing on your screen. This saves bandwidth of course, BUT ... PrPro is not setup to work well with VFR footage, it really needs CFR, constant FR. So ... highly recommended if your capture program doesn't allow setting CFR is the free program "Handbrake", which you can google for. Use that to convert the footage to CFR, then import that into PrPro.
    Neil

  • Premiere Pro CC 2014 - audio frame repeating while scrubbing

    In 2014 and CC, I often run into an issue where an audio frame will repeat while scrubbing.  It stops when I hit play or move the cursor to another part of the timeline.  Obviously, this makes audio editing a nightmare.  I've checked all the settings and I'm at a complete loss.  I've unchecked "maintain pitch while shuttling", but the problem persists.  Is there something I'm missing?
    I've searched the forum, but haven't found any answers.  Any info would be greatly appreciated.
    Premiere Pro CC 2014 (8.0.1)
    Mac OSX 10.9.5
    2 x 2.4 Quad-Core Intel Xeon
    24 GB 1066 MHz DDR3
    NVIDIA GeForce GTX 680 2048 MB
    KONA LHe+ (5/14/13 firmware)
    ProRes LT (.mov)
    No third party codecs

    Apparently this only happens when holding down the next or previous frame keys.  Individual clicks don't seem to cause the repeated frame.

  • Audio Gain Crash - Premiere Pro CC 2014

    Working in Premiere Pro CC 2014 I'm experiencing an instant crash when using the Audio Gain function on a clip or any selection of multiple clips in a sequence.  The clip(s) in question come from a TASCAM DR-100 audio recorder I've used dozens of times without issue.
    ASUS G75
    Windows 7, 64-bit
    Intel i7-3630qm
    16GB RAM
    NVIDIA GTX-670MX

    I found it strange that this was happening only on two of my sequences (timelines) in the project, while other sequences have no issue with Audio Gain.  It's either the sequence, or one-or-more clips—not Premiere, right?  First, I ran CCleaner and re-launched Premiere.  Clearing system crud with CCleaner seems to have aleviated the problem for *some* of the clips.  I could now perform Audio Gain functions on some of the clips.
    So my next thought:  Clean the Media Cache in Premiere.  I tried that next.  When I re-launched Premiere and the conform process begain to do it's thing, building new files.  When it was done, ALL of my clips could be selected and Audio Gain performed.  SUCCESS!  The answer to Audio Gain crashing Premiere Pro, in my case, was to clean the media cache.
    Interestingly, that's not the end of the story; there's still some funky issue with one single audio clip in this sequence.  But since the Audio Gain crash isn't happening anymore, I'll present the new issue in a new thread.

Maybe you are looking for