Audio Glitches on Timeline, but not when played in QT?

I had a client send me his project on a harddrive.
They exported a .mov file from FCP and it has no audio glitches when played with Quicktime.
But if i drag that file to a timeline and watch it through my DSR-25 to a NTSC monitor, it has audio glitches in certain spots.
Always at that spot though and if i watch the file in Quicktime, it plays fine.
All audio was exported originally out of FCP using Quicktime Movie with 48khz, 16 bit stereo so nothing needed to be rendered.
Seems like it has something to do with it going over via firewire through my DSR-25.
Has anyone else had this problem.
I can't make a Master DVCam tape for this master because of these audio glitches.
Thanks for any help,
Brian

I read a post about a user having this same sort of issue.
He said when he turns off his video layer, in my case just V1, the audio played fine.
Same with mine.
So it seems to be an issue with the video track playing with the audio track.
If i export it and bring it back in, will it just create that same audio glitch?
Guess i will have to try.
Anyone have this issue or similiar?
Thanks,
Brian

Similar Messages

  • Bounced audio is seconds shorter, but not when re-imported...

    Hi - I'm scoring to video (.mov file).  I have hits in specfic spots, and my client was complaining that things weren't lining up.  The time - let's say at :45 looks correct on the video, but when I bounce the audio and play it back in Quicktime, that hit is almost 3 seconds sooner.  I assume my client is having the same timing issue. 
    I have re-imported the audio into the project, and it's accurate!  I've started a new project, and the hit is again in the correct spot.  What gives?  Inside Logic, the timing is correct, outside it's shorter. 
    iMac, Logic 9, OSX 10.8.5

    Hi, Steve. After you bounce your mix to an audio file, what next?
    In other words, if we take it step by step...
    1. Your client sends you a video file in mov format.
    2. You load the video into Logic and create your score.
    3. You bounce the audio mix of your score to an audio file.
    4. You close Logic.
    5. You now have a new audio file and the original video file. They are seperate things.
    6. At this point, how do you marry the audio and video together for playback for your client?
    To me, it sounds like that is the crucial question.

  • Sound works but not when playing music

    When i turn on my computer it makes the start up sound. But when i try to play music out of itunes or off the internet, the sound wont work. I know its on, but no sound is coming from the speakers. i have an hp G71

    Hi,
    It might be worth running Microsofts Automated Fixit for sound playback issues on the link below.
    http://support.microsoft.com/gp/no_sound
    Best Wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No Audio In FCPX Timeline, But It's In The Clip Window

    I grabbed some video with my iPhone and imported it into FCPX. I'm ready to start editing, so I drag the clip into the timeline -- but there's no audio. Previewing the clip in the Clip window/area pays the audio just fine -- but I get nothing in the Timeline. I see the waveform, I see the meter moving like it should -- but no audio.
    What am I doing wrong?

    rlib3 wrote:
    Luis!  Hi, it's me again...the person with the conversion issues?  Anyway, that has been solved thankfully.  My new problem is what has been mentioned in this thread.  Audio in Clip Viewer but not when dropped in the Timeline.  I attempted the fixes suggested in this thread but I'm using FCP Version 4.0.1 (old, I know) and the steps given aren't the same.  The first part of my project has audio in the Timeline...I'm guessing I clicked or unchecked something...I've looked everywhere and can't figure it out.  Even pulled out the manual!  Let me know if you have any suggestions and thank you in advance!
    I have not used older versions in a while, but I guess you may have disconnected the little "a1" from the big "A1" as seen in the image below. Drag to reconnect them. If this is not it, then I can only suggest you ask this in the Final Cut Studio forum (or Final Cut Express forum - I imagine that is what you are using).

  • IMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.

    iMovie seems to have developed a glitch. When i try to import photos they show in the timeline but not in the movie.
    Any ideas?

    You are probably looking in the wrong place - all photos in Photo view and in event too unless you have a corrupted library
    most common cause of your not finding them is bad sort - view menu ==> sort events
    Nest most common cause is a bad data/time on the camera - this can be corrected using a smart album to find the photos from that camera and then using using the adjust time/date command to fix the bad ones
    YOu can alwasy find the event a Photo is in by selecting it and selecting show event
    LN

  • Audio in source but not when dragged onto timeline

    Hi,
    I have just been editing some video taken with a dslr, and the audio is there in the source, but not when dragged to the timline?
    I see there is an option to select drag video or audio only, but I cannot select the audio.....
    Any help with tis please...?
    Kind Regards
    Rossco

    http://forums.adobe.com/thread/1374590?tstart=0

  • I am trying to burn DVDs from iPhoto slideshows.  My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over".  This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player.  Any suggsts

    I am trying to burn DVDs from iPhoto slideshows.  My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over".  This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player.  Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has?  Has anyone heard or tried an app called Vilisoft?  I read good things but I am not sure if it will do what I want.
    Jim

    Then use multipel 99 picture slideshows. 
    You can have up to 8 or 9 slideshows per menu.  If you add a sub menu reduce that by 1 and add 8 more to the sub menu.  The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows. 
    However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD.  It just becomes a single video/movie file.  So you should not have a problem with exporting at the large size, 720 x 540,
    and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
    OT

  • I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    Go to settings/music/volume limit tap on that.  Make sure it is set to OFF and when you tap it that the slider is at max

  • Ipod nano plays with headphones but not when plugged in to player

    I have a nano 16gb 4th or 5th generation.  It has worked fine up until about a week ago.  It works if I plug in the headphones, but not when it is plugged into the car stereo or an iHome.  Any thoughts?

    If:
    -you and your husband have the same generation iPod nano
    -they both have the same latest software
    -you tried the car stereo with the same iPod charging cord.
    (with 32 pins connector I just wanted to make sure it is not the headphone plug)
    this means that the problem is indeed with your iPod nano.
    Since you also said that before last week everything worked fine, something must've gone wrong after that.
    This could be software-related or hardware-related. Did you try to connect it to your computer? Does the computer recognise it? Can you still charge it?
    If the computer does recognise the iPod it might be a good idea to 'repair' your iPod via iTunes.
    Or try the Five R's: http://www.apple.com/support/ipod/five_rs/nano5gen/# (more or less the same for 4th and 5th gen)
    If your computer does not recognise it, it probably needs to be repaired. But since it is 4th or 5th generation I guess the warranty is void already, and you'll have to decide how much this is worth to you or if you wouldn't want to buy a new one.

  • Sound through hdmi to my tv works but not when watching video online like 4OD

    the sound through hdmi to my tv works with music and videos I have downloaded, but not when watching video online like 4OD and youtube.
    How can I get it to work?

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • Podcast - works on iTunes page but not when subscribed

    Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.

    It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
    http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3

  • I want to stream all audio to my stereo via AirPort. Right now audio only streams with iTunes, not when I'm online (YouTube, SoundCloud, Spotify). What must I do? Thanks! 2011 macbook pro 10.6.8

    I want to stream all audio to my stereo via AirPort. Right now audio only streams with iTunes, not when I'm online (YouTube, SoundCloud, Spotify). What must I do? Thanks! 2011 macbook pro 10.6.8

    Thanks, Bob. I've seen this suggested before. However, I'm at a friend's place (cat-sitting). He owns an older MacBook (almost positive) and he streams audio without Airfoil. All he uses is AirPort Express. He told me to simply click alt-option and the volume icon and a menu drops down, and I select "AirPort Express". But it never appears. All the menu offers is this:
    "AirPort Express" isn't an option.
    Why is that? Is there something fundamental I'm not doing?

  • HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
    If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
    Russ

  • 16:9 footage displays properly in timeline but not in menu

    Greetings guys,
    this is a follow up to a 16:9 import issue I had previously.
    We now have a good quality 16:9 file that imports as an asset into Encore no problem. It plays back perfectly in Encore in a timeline but if I use the footage as a menu, which I intend to do with one clip then it puts letter boxes either side of the footage. I check 16:9 in the properties but it doesn't help... I don't understand why encore will play the widescreen footage and display it properly in a timeline but not as a menu...
    any thoughts would be great,
    here's some footage details:
    CODEC: MPEG2
    FRAME RATE: 25.000 /s
    DAR: 1.778 (16:9)
    720 x 576
    SAR: 1.250 (5:4)
    PAR: 1.422 (~10:7)
    cheers,
    Grant :)

    Select the menu then "Edit->Edit Menu in Photoshop"
    Verify the menu dimension in Photoshop, if the menu is HD size then reduce it to 720x576.
    Or use any DV-PAL size menu from Encore library.

  • HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

    I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

    From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
    Install that and let me know the result! 
    Have a great day!

Maybe you are looking for