Audio goes missing after advanced pulldown removal

Anybody come across this? I can't find anything in the forum about it.
I shot 24pAdvanced on my DVX-100A. Captured everything as 29.97 NTSC DV in 20 min segments. I do a DV Start/Stop Detect to get markers placed, then do an advanced pulldown removal and edit on 23.98 timeline. I've got about 100 hours of footage, and have been going along quite smoothly on about 80 of those hours.
Recently however, some clips mysteriously lose their audio after the pulldown removal! Both audio tracks are still there, but they are flatlined. All except for the first 4 or 5 seconds actually. That much audio is present. Then the waveforms show it just flatline. Recapturing the tape replaces the audio, but then it disappears after the pulldown again!
Any thoughts would be welcome
2GHz Mac Book Pro Mac OS X (10.4.8) 1.5 GB RAM, FCP 5.1.2, 23" HD monitor

I am delivering an EDL to do an online in HD for later on blow it up to 35mm. I just don't want to fix problems in the online because it'll take time therefore MONEY. I was thinking on recapturing the master sequence in my machines at advanced pulldown removal, fix any problems and then export the EDL to go to the online.
Dual 2 GHz G5; 4.0 GB RAM, Mac OS X (10.4.8) Dual 2 GHz G5; 2.0 GB RAM,

Similar Messages

ADVANCED PULLDOWN REMOVAL - Problem with 60 Hours of Material

After I capture about 60 hours of material and worked for the past 3 months in a 90 minutes documentary I realized that the material was shoot in 24P advanced and was not captured in advanced pulldown removal mode! What should I do now? Should I do an online of the 90 min sequence with advance pulldown removal? What should I expect to happen? Thanks a lot in advance for your help.

I am delivering an EDL to do an online in HD for later on blow it up to 35mm. I just don't want to fix problems in the online because it'll take time therefore MONEY. I was thinking on recapturing the master sequence in my machines at advanced pulldown removal, fix any problems and then export the EDL to go to the online.
Dual 2 GHz G5; 4.0 GB RAM, Mac OS X (10.4.8) Dual 2 GHz G5; 2.0 GB RAM,

Advance pulldown removal problem

There is a bit of info i've found about similar issues but nothing covers my scenario. I captured dvx100a 24pa footage-- but without the advance pulldown removal selected. The clips therefore all had frame rates of 29.97. I then went to tools and added the "*remove advance pulldown*".
Two different things happened to my clips. It's corrupting some clips and not others. Some worked and changed to 23.98 fps. Others instantly went offline and when I tried to reconnect the media from the capture scratch I get this:
"*File Error: 1 file(s) recognized, 0 access denied, 1 unknown*" and I can't reconnect the media--that still plays fine in quicktime from the capture scratch. I have to re-digitize all the random clips that this happens to.
I'm wondering if it might be a fps and timecode issue-- or a codec issue. Any ideas would be greatly appreciated.
thanks.

Think I figured it out. There was a duplicate folder with the media files on two hard drives and FCP may have been trying to reference both. Deleted one folder and files went offline then when i reconnected the media and applied "remove advance pulldown" it worked this time.

Beats audio software missing after I installed windows 8.1

Beats audio software missing after I installed windows 8.1
my laptop: HP pavilion p011sv

Hi @Boukou ,
Thank you for your inquiry.
I understand that after updating to Windows 8.1 you no longer have the Beats Audio software.
You should be able to download an updated audio driver from HP Pavilion 15-p011sv Software & Drivers page .
This should reinstall your Beats software.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Reconnect media dialogue not working properly after advanced pulldown rem..

i'm running a macpro with the latest version of FCP (5.1.4) and tiger (10.4.9)
i have a project where some of the footage is 24Pa, but was captured as regular 29.97 ntsc footage. because it's 24pa it's creating some interesting banding when i try to export out with out removing the pulldown. in an attempt to remedy this problem i decided to remove the pulldown and export everything as a 23.98 file (it's going on the web)
I selected all the clips that needed to have the pulldown removed and used the "remove advanced pulldown" from the tools menu. fcp went through and processed everything as it should, but when it finished it only reconnected a couple of the clips, leaving the rest offline.
I then selected the offline clips to manually reconnect them, and the reconnect dialogue opens, it lets me choose the files, but it doesn't show the file in the bottom half of the window, but it will continue to let me choose the next file down, the problem is when i hit the end of the list of files to reconnect, it still shows all the files in the top, and none in the bottome, but the "skip" "locate" and "search" button are no longer available and the "connect" button at the bottom is also not available.
i've checked the processed files with quicktime and they all read as 23.98 files now.
I made a copy of all the media files beforehand, so i have all the raw captures as 29.97 clips just as a forethought.
any ideas as to what the issues are? and why the reconnect dialogue is acting so strangely?
2.66 macPro Mac OS X (10.4.9) 2gb ram fcp 5.1.4

This shouldn't work. What the proper way of doing things is to capture, reverse telecine, THEN import into FCP and begin editing. You cannot, AFAIK, edit, then reverse telecine and have it connect. This is because all the original clips are linked to 29.97 media, and you are trying to connect them to 23.98 media...and it doesn't want to because the frame rates differ.
Remove pulldown BEFORE you edit, not after.
Shane

Mail goes missing after downloaded from POP server

I have never run into this before. I have on this brand new MacMini (2 weeks old) with one POP email account set-up on Mac Mail 2.1.1 and in one folder the messages are going missing. Anything about 3-4 days old are fine, but the rest give me a message telling me to download them from the server. In the Mail preferences I have it set to remove from the server after one week, but considering this is a POP account it should have been downloaded to the computer once mail is checked from what I understand. I have seen this problem before with IMAP, but not POP. Now in other folders this isn't happening, not the Inbox or Sent just this one folder. I rebuilt the folder and these messages were completely deleted. Then I repaired permissions, however, in the log it didn't say that there was any issues with Mail. Does anyone have any insight or any suggestions? I just don't want this happening again in the future. Thanks.

If this is a custom “On My Mac” mailbox, in the
Finder go to ~/Library/Mail/Mailboxes/. Can
you see the mailbox there? Report its contents.
Note: For those not familiarized with the
~/ notation, it refers to the user’s home
folder, i.e. ~/Library is the Library folder
within the user’s home folder.
SAME PROBLEM. SUSPECTED PAST WEEK AS TRASH AND DELETED MAIL DISAPPEARED. FOLLOWED YOUR SUGGESTION LIBRAY/MAIL/MAILBOXES.
NOTHING THERE IN DELETED/MESSAGES AND OUTBOX/MESSAGES
SPOOKY! PLEASE MAKE IT STOP.

ITunes system tray icon goes missing after Windows Explore Crash!

When windows explore crashes the iTunes system tray icon goes missing.
Can you please make it so the iTunes icon will still remain in the windows system tray after a windows explore crash?
Other software I use icons remain in the system tray after a windows explore crash.
Please fix this APPLE.
I am running Vista 32Bit
Thanks
P.S. it looks like it can be done. Please look at the link below.
WM_TASKBARCREATED
http://www.codeguru.com/forum/showthread.php?p=986134

Hey Michael,
You can leave feedback for iTunes here:
http://www.apple.com/feedback/itunesapp.html
Jason

Field Dominance inconsistent after Advanced Pulldown capture

Following up on my immediately previous post (regarding the interview footage I captured from my dvx 100A using advanced pulldown setting in FCP5) I notice that, according to my FCP5 browser, some of my captured 23.xx clips show a Field Dominance of Lower (Even), while other clips show the word None under Field Dominance. Should I be concerned? And, if so, what's the solution?
Thanks!
Powerbook G4 15" Mac OS X (10.4.4)

Answered in another topic. Thanks!

Iphone purchased music goes missing after sync with iTunes?

I have noticed that when I sync my iphone 4 that any music on it under purchased on iphone all of sudden goes missing. I can find it in my library in my computer but no longer under music puchased on iphone on my iphone. It used to not delete songs. Any ideas how to fix?
Also, this music is no longer showing up as purchased in my itunes account either. It is in library so it isn't truly missing but it is creating a mess for me.
I would appreciate any help.

Start here: http://www.apple.com/support/itunes/store/buy_troubleshooting/

Wifi Adapter Goes Missing After Working

HP Paviliion laptop running Windows 8 from factory recovery (2 times). Problem: WiFi works then adapter goes missing. Device Manager / Network shows only the wired card. Scan for new hardware yields nothing new. Wifi button shows toggle from Airplane Mode Off / Airplane Mode On OK. This is the F12 button (I mentioned this because on a MSI 6200 series laptop the wifi button and another are mislabeled). Could it be the wifi card going bad since I don't see the card in Device Manager? Thanks. Darryl

Hi,
You can find driver and installation manual for Mac in the download section. Choose Model TEW-624UB.
http://www.trendnet.com/products/proddetail.asp?prod=170_TEW-624UB&cat=76
They released driver for 10.6

Audio Files Missing after sent from FCP

I'm sending a sequence to STP from FCP. There are 8 tracks of audio (4 stereo pairs). Tracks 1 & 2 have dialogue, 3,4,5 &6 have SFX and 7 & 8 have music. After sending a Multi-track project I am missing audio files on the dialogue track. The visual reference is there. The audio and video are linked in FCP but sections of dialogue are just not there.
I've repaired disc permissions, trashed preferences, ran Disk Warrior and reinstalled FCS. I'm on STP 3.0.1.
I searched the forum and was unable to find a similar situation. Any and all insight are greatly appreciated. Thank you in advance.

You have to assign tracks to a submix and then out to the master before you can hear them.
But some of the audio files are there and some of them aren't. There is no rhyme or reason for audio that appears and files that are missing. I can hear the dialogue that made it to STP from FCP, along with the SFX and the music. I've never assigned a submix to audio just to be able to hear it.
Are you on a laptop?
I've tried it on my 8 Core Mac Pro and my 2007 MBP. Same result on both. I have other sequences where everything is sent over completely. It's just this one. It is no different from any other sequence. It is all ProRes 422 and .AIFF 48khz/16 Bit
Thanks for your input.

Core Audio Components Missing After Clean Install and Update to 10.3.9?

I did a clean install of 10.3.x onto my hard disk and then updated to 10.3.9 through Software Update.
Before this install I'd been running 10.3.9 (my disk crashed -- or so I thought -- hence the re-install of all above). I'd been running a music recording program and taking advantage of Apple's Core Audio AU components (e.g. AUDelay, etc), which should be in /Library/Audio/Plug-ins/Components/ or something like that. Now they are missing entirely.
How do I get them back? Where are they to find?
Thanks!

It was a problem with the 3rd party software -- I hadn't run the installation update to interface with the AU Components -- after the reinstall. Thanks.

Beats audio Panel Missing after upgrading to Windows 8.1 and installing HP Reccomended Drivers

I recently upgraded to Windows 8.1 on my HP Envy H8-1450. The Beats audio Panel Disappeared and only shows IDT.
I uninstalled and re-installed the HP reccomended audio drivers several times....no luck.The sound does not sound as it did under Windows 8...actually it is crapy.
Please help.....Thanks.

lacadan,
Did you reboot your PC after installing the IDT codec in Device Manager?
I have upgraded from Win 8 to Win 8.1, have the same driver (6.10.6491.0) as you, and also have a fully functioning Beats Audio Control Panel in Control Panel.
When initially removing the incorrect Beats audio codec in Device Manager you should also check completely remove the drivers from your system, reboot, and Win 8.1 should install the correct version of Beats. You then have to reboot your PC again to complete the installation of Beats.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Audio goes quiet after watching a while

This is happening far too frequently. We have been connected about a month.
After watching a channel for a while, it goes completely quiet. It's happened with NHL Network, Golf Channel and CNN. No specific pattern.
I go to LAST channel and sound is there, LAST back and quiet.
I've even tried powering off the STB and back on. No luck. Eventually it comes back.

Is this audio issue only happening on that one channel or other channels as well? Do you lose sound like that when watching a DVD or using a different source on your TV? To run a self diagnostic, press MENU, then goto CUSTOMER SUPPORT, then IN HOME AGENT, then SET TOP BOX AUTO CORRECTION. If that does not fix it, try from the same menu REBOOT STB. Send me a private message if further help is needed.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Custom button goes missing after click the button in Customer Master

Hi All,
I have one query regarding Custom tab button in Custome MAster.I have implemented BAdIs using CUSTOMER_ADD_DATA_CS and CUSTOMER_ADD_DATA to match my requirment.
Query:
While click the custom button(which i have created in Customer Master) , the subscreen is displayed but the Custom Button is missing.Where in Standard Buttons like 'GENERAL DATA' and 'COMPANY CODE DATA' Std buttons in Customer master Etc. buttons going to disable mode while click these button in custome mastar.
Is there any OSS notes to implement OR we required to set up some PF status to match above requirment.
Please let me know.
Thanks,
Sridhar

If I follow you, no. That's the way it works. The buttons are composited with the background so become part of it. I'd rethink the design.
Basically, you don't want the highlights to determine the color of unselected buttons. You'll always have fringes and jaggies. Having a non-transparent color set for the unselected state kind of does what you want, but won't look the best.

Audio goes missing after advanced pulldown removal

Similar Messages

Maybe you are looking for