Audio goes out after retiming clip..

I'm working on a project in FCPx and I'm retiming a clip to 89%, but everytime I change it there's no audio whatsoever. It just stops working.
Tried it with detaching the audio first and retiming them separately and the same thing happened. There aren't any soundwaves visable after I retime either.
Help, this is driving me crazy!!

OK
I'm a soft head. Now I understands what You want to do.
OK there is a smart way to exchange video for a photo but keeping the audio. BUT
I use a much more raw way of doing this.
I import my photo. Set a duration for it eg. 4 sec => 00:00:04:00 exactly
then I select the video clip
Extract sound - so that I don't affect this when doing the brain surgery
Cut in the video part away exactly 00:00:04:00
Select the photo clip - drop this before the un-needed video clip
Select the un-needed video clip and delete this.
Now I've replaced a pice of the video with a photo but the sound flows as it
was un-tuched.
I always work this way - think it has to do with super-8 film editings during
the stone-ages.
There is a function in iMovie that does this - replace action but I've never used it.
Yours Bengt W

Similar Messages

HELP! Audio goes out of sync after export!

OK, folks. I need your help. I have a looming deadline of THIS FRIDAY to hand this in.
I have a finished multicam edit of a show that runs 1 hr 20 min. It plays back perfectly in the timeline, all video and audio perfectly in sync. Looks and sounds exactly like what I need.
When I export the video as an H.264 file, the audio gets out of sync with the video by 13 frames! But that's not all... It doesn't happen to the entire audio track. There's about 50 minutes in the middle of the video where the audio goes out of sync. The audio at the beginning and ending of the video is lined up perfectly in sync. It's just the middle section that gets screwy.
What do I do?!
This has never happened before, and I've worked a lot with multicam in Premiere Pro CC before this. Never been an issue. I tried uninstalling and reinstalling Premiere, and also deleting all media cache files, but still no dice. I also tried copying the clips into a new sequence in the same project, copying the clips into a new sequence in a NEW project, nesting the sequence... nothing works.
My setup:
MacBook Pro Retina (Rev. A)
Premiere Pro CC (latest version)
Panasonic GH3 footage in 1080p 24p AVCHD timeline
3 cameras & 1 audio WAV file in Multicam
Any help would be greatly appreciated!

OK, I figured out how to fix it:
In Premiere Pro CC, click on SEQUENCE > DELETE RENDER FILES.
Try exporting the movie again.
It worked! I exported the same sequence, and it took a long while to re-render the audio files, but when it was finished exporting the audio and video were in perfect sync. I'm not sure what caused it, but this fixed it, so hopefully anyone else having this issue can save a lot of time by reading this.
Cheers!

Audio goes out on my Air after I unplug my headphones.

Audio goes out on my Air after I unplug my headphones. Reset did not fix it.

Hi johnfan1939,
Although this article specifically mentions the iPhone, many of the steps apply for the iPad as well.
iPhone: No sound or distorted sound from speaker
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:Restart the iPhone.Restart the iPhone.
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Best Regards,
Nubz

During editing on MacBook Pro 2.2GHz i7, audio goes out of sinc with video

I have been having a lot of trouble with audio going out of sinc after I have edited a 30 minute program. When I make a second cut, I find that the audio has jumped under the first cut about half an inch back, and this happens with every progressive cut. Then after "sharing" to dvd the audio is out of sinc with video throughout. I then have moved each one of these overlaps back into position and still have a problem with audio out of sinc.
HELP.

I was using a different laptop for post since the macbook was busy "sharing" to dvd, which, since I closely examined each cut at highest magnification to fix them ended up making video watchable. Not every cut came out of sinc, but several do.
It is both sides of the cut which come out of sinc, the right side laps over the left and then I noticed when I corrected them with greater magnification that the left side was moved left to cause a gap. I guess I just have to closely examine each cut when done with the whole video since also these overlaps are caused when I zoom out to view the whole length of the timeline, most of the cuts will overlap at that moment. Really strange. I had trouble fixing these but less trouble whe I turned off the snap in option.

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

When audio goes out of sync..

In FCP7, when audio goes out of sync with the video track it came from (even when they are unlinked), a red warning box is displayed on the audio track and tells you how far out of sync it is, which easily enables you to resync.
Well, in FCX my audio went out of synce, but i didn't know it until i played back a segment i was working on, where i spliced two audio tracks and video tracks together. Right now i'm trying to fix the one audio track so that is synced up with its parent video track, but so far i'm just guessing that it's a good sync rather than knowing FOR SURE whether or not it's truly synced back up.
Is there any kind of work around, which enables you to resync in a manner similar to before FCPX?
Thanks

I am not sure if your problem has been solved already but here is the way to do that:
select in the clip in the timeline the part were the audio should be return in sync. use the blade-tool to make that part a seperate clip.
Higlight this clip in the timeline and use shift-F to highlight this clip in the browser. There it wil show up partially of course.
Use only the audio and put that part under the selected clip in the timeline where you need the original audio. remove the original out-of-sync audio.

How do I keep the screen light from going out after a few seconds

How do I keep the screen light from going out after a few seconds on my iphone

Settings>General>Auto-Lock

Audio sync problems with greenscreen I have replaced the camera audio with my zoom recorder audio and it is in sync. When I apply greenscreen the audio goes out of sync. What am i doing wrong?? So frustrating..Thanks, Peter

I have replaced the DSLR audio with audio from my Marantz recorder and it is in sync with the dialogue. I apply green screen and the audio goes out of sync. Cannot seem to make it work. what am I doing wrong? Thanks, Peter

Thanks for the reply. I don't have time for this. is it time to switch to a different editor?

Audio Drops Out After 30 Seconds

I have just installed Premiere Elements 12 on a new Toshiba with Intel i5 and windows 8. When I play a viedo through Elements the audio drops out after 30 seconds. When I play the same viedo through Windows audio does not drop out. I have an older HP with Intel i3 and Windows 7 running Premiere Elements 10 and I do not have any issues with the audio dropping out. This is the first time I have used this forum so I hopr I'm doing this properly. Thank you, Bob.

With a slower machine like that, it's possible you haven't given the program time to fully conform the audio and video in your file.
Clear the file from your Project Assets and re-add it to your project. Watch the progress along the bottom of the program and wait until it has completed its conforming before you start editing.

Audio cuts out after 2 minutes

I'm having a bizzare trouble with the Audio cutting out after 2 minutes while watching TV. It comes back for exactly 2 minutes only after I change the chanel, and with every subsequent chanel change after.
I have the Audio out on the @anywhere card connected to the line-in on my Audigy 2 sound card via a stero cable (which I've changed) and I've verrified that my sound card is ok by running other devices into the computer through the line-in.
I've also had alot of trouble with the MSIPVS software crashing and causing my system to hang. I've only had the card and software for a short time and am still working out the bugs but any help will be appreciated.

Did you look at the top of THIS forum? In the Announcements and Important threads? I know there is a sticky thread about sound cutting out, it may, or may not be related to the one problem you have.

Sync Goes Out on Several Clips AFter DVD Pro Burn

This problem existed on several clips that were relatively close together in timeline. As this is a 52' video with many cuts and multi-tracks, I tried using the audio mixdown render in FCP and then burned again. There was an improvement, but I still have one clip out of sync.
Any ideas on what else to do?
I'm exporting to QT Conversion and encoding as high as I can push the DVD Pro encoder - to around 7.2.
FCP 5
DVD PRO 4

I'm correcting what I reported earlier. The sync goes out on the output from FCP. This is NOT a DVD STUDIO PRO problem! I'm using the QUICKTIME CONVERSION option on the output.
I'll repost in the FCP forum.

When I use media manager to upres clip audio goes out of sync

I captured a clip and put it in DVNTSC 48kHz timeline at OfflineRT NTSC (Photo JPEG) then used the media manager to create a new sequence at full DV NTSC 48kHz res. I choose "Create offline", "set sequences to DV NTSC 48 kHz", and check all the boxes. I save a new project, open the new timeline and recapture the clip. The video looks great--it recaptures in full DVNTSC 48kHz res. But the audio is out of sync (by about 28 frames it looks like). What am I doing wrong? (This is the first time I'm trying this offline-then-online-process.) thanks.

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

My audio goes out of sync after import

I have a bunch of masters of 1h documentaries that I've done using Adobe Premiere CS6. I've exported the masters using exactly the same specs:
Apple Pro Res 422 (HQ), 23.98fps, 1920x1080p, 48kHz, 16b, PCM audio.
I have to do some changes on the masters of these shows. They all play fine on several players like VLC, Quicktime, Mpeg Streamclip, etc. However after I import the masters into Premiere Pro CC, 3 out of 10 shows get the audio gradually out of sync, even on the source monitor before I put them on a timeline. The behaviour continues even after I place them on a timeline.
The project settings are the same as the masters and so are the sequence settings. I've tried to recreate the project, delete and re-import, duplicate the file and import that, and no matter what I do the same 3 masters go out of sync after the import.
I've tried to find a solution in many forums and despite noticing that several people have the same issue, no one has a valid solution for my problem.
I cannot go back to CS6 since my company updated their systems to CS7 so I can't even cross check.
Any suggestion will be most welcome.
Thanks in advance peeps.
NJ

Couple of suggestions.
First, rather than opening the Master export, go back to the original project. That should open fine in CC.
Second, with a CC subscription, you do have access to the full CS6 suite.

Audio Cuts out after a few minutes. IChat AV 2.1

I have surfed and have not found any topics like this yet. Audio is cutting out after chatting with another Mac - AV user. Both microphones still appear to work in the preferences, but the person can not hear on the other side. Video works fine, but now audio. Any help or suggestions would be helpful. Virex 7 has already been removed. This solved the video problems. Merry Christmas.

Hi Brian,
Your title states that the audio cuts out during a chat but the post itself seems to imply that you do not have Audio after the chat.
IF it is cutting out during a Video cut can you please tell us what connection speeds both ends have ?
It should be a at least 100kbps up and down.
If it is not you will have problems. You may find that a cable connection varies as the chat goes on and this might be part of the problem.
Soemthings that might help:
GO to System Preferences > Quicktime > Streaming tab and set the Connection sped to mathc the download speed at either end.
GO to iChat > Preferences > Video > bandwidth Limit Drop Down and set this to NONE.
Ralph

Audio drop out after burning to iDVD

I am running FCE 2 and checked all of my audio (mixed it down and everything). Plays well when I run FCE. When I burn the clips to iDVD, I notice that the audio drops out in certain scenes, and it's the same scenes. Ruined 5 dvds so far after trying to a few things.
I am using all internal HDs (Extended Journaled). Any suggested would be appreciated. Thanks

Hi
a. Audio from iTunes - has to be used by a work around
I do - create a Playlist in iTunes with needed audio
Burn out as an Audio-CD (.aiff) Not .mp3
Use this audio in Your FinalCut project
b. I do from FCE/P to iDVD
• Export out as a QuickTime .mov file
• Not selfcontained (not important but saves time and space)
• NO QUICKTIME Conversion (Important)
c. To get iDVD to run OK
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk ! (others of no importance)
• I use Verbatim DVDs
• DVD-R
• Burn speed set down to x4 or x1 (only relevant to newer iDVD)
(Instead download the Hack (Hurz and Pfurz) that makes it possibly to do a DiskImage with iDVD4
if earlier iDVD versions - forget this
then save as a DiskImage - test it with DVD-player tool and see that it runns OK
THEN do the actual DVD burn by using Disk Util tool from this DVD image You just did.
AND Here You can set down burn speed to x4 or x1.
• iDVD 4 disc image burning can be enabled through the patch Hurz and Pfurz - search the net.
Good luck Yours Bengt W

Audio goes out after retiming clip..

Similar Messages

Maybe you are looking for