Audio gone on export- help please!

OK I have tried to search the forums for an answer without success. I have a presentation that I had done which includes one slide with a video and another slide with just an audio file. I did "record slide show" and put narration into the presentation. When I PLAY the slideshow everything works perfectly- with audio on on both the movie slide and the audio file slide as well as my recorded narration. However, when I EXPORT it to QT the sound from the slide with the audio file is missing. The movie slide still has sound and the narration is still there, but the slide with the audio file does not have sound from the audio, only the narration. I am make no sense of this. Suggestions greatly appreciated!!
Eric

Thanks everyone for your advice, i cant really try anything right now as, after a visit to the genius bar ( the local genius told me there was nothing he could do) and one to tekserve I have dropped the computer to a data recovery company. However, my more technology savvy friend tells me I should precise the following as it might make a difference to your diagnostic:
I turned off the computer manually (pressing the button that is) while it was trying to restart as it was taking forever.
There was actually one file left on the desktop, a random word document.
Hope this can help someone help me

Similar Messages

I turned off my iPad, but when I went to turn it back on, the apple logo just stays there. It's been there for 10 minutes, and hasn't gone away. Help please.

I turned off my iPad, but when I went to turn it back on, the apple logo just stays there. It's been there for 10 minutes, and hasn't gone away. Help please.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Trouble with denoiser audio effect when exporting help!!!

I have been working on a school assignment for media on Adobe Premiere Pro CC and have come across a very frustrating issue that I have no idea about how to solve. it goes under the category of a 'technical difficulty'.
As I have alot of interviews and talking in my project for my Documentary I am shooting on Bullying for my Current Affair I have alot of audio to deal with and with my Rode VideoMic Pro when in conversation in the midst of an interview there is a constant 'hiss and crackle' that one can hear when watching hence I have used the audio affect of "DeNoiser" to get rid of this and it seems to work great on my workflow in my sequence in Premiere as I have reduced most clips to -15Db's. But when I export my project as I have done several times,the 'Denoiser' affect doesn't work for the first 3 seconds + for all clips that I have used to affect for. At the start of all the clips used with the affect there is a constant hiss and crackle and after 3 seconds it fades out??? Please help me with this very unusual problem as I want this to be a fantastic film on your fantastic software!
Thanks

Is the music on a separate track, or recording live during the interview? Hopefully the music is separate, and if so then do the following:
In Premiere, right click on the audio clip that contains the voice and choose export to Audition. Premiere will export the clip into Audition (and it will update on the timeline when saved in audition).
In Audition, highlight a piece of the clip that is noise only, (a sizable gap when there's no talking and only the ambient noise of the room is heard) capture that as a noise print (right click, "capture noise print" or Shift-P). Then in Effects, select the 'Noise reduction (process)" tool. (Note: I assigned a custom key for easy access as I use it frequently). Then tweak the settings of the tool until it sounds good to you.   You can follow the settings I have posted above as a guide/starting point, but no two settings will work for every situation, (notice how I chose a logarithmic curve and added control points to follow its contour).
Personally, I don't try to remove all the noise, just tame it until the voice is dominate. The more aggressive the reduction, the more unnatural the result. A little ambiance is expected and sounds natural.   Even then, a little noise is masked when I go back in and add music. You can play the clip in a loop while you make adjustments and go ahead, go the extreme to get sense for what each tool does, and then be subtle. Your ears are the best sense of measure.
Once your happy, select or highlight the entire clip and click apply. Listen to the result. If you're happy still, then save it and it will update in Premiere, and you grab the next clip and repeat the process.
Once you have all the voice clips edited, then you can add music. I suggest that you keep the music at -12dB lower than the voice as a starting point.
You can also apply music via a ducking (side-chain) technique in Audition as another step. To do so:
After fixing all the voice clips, mute any music tracks you have. Create a new sequence and paste the sequence you've edited into that new sequence, right click on the audio track in that sequence and bring that into Audition like you did before. What you'll have is all the audio clips assembled into one.   "Normalize" that freshly import track, ensuring even volume/peaking throughout, (to within -3dB) is a good target.
In Audition open a new mutli-session and choose the "VO with Ducking" template. Load that freshly imported audio onto the voice track (top), and add you select music in the track beneath it. Dial down the volume of the music track until the voice sounds dominate (I try for a -12dB difference). Double click the Dynamics Processing filter in the Music track and in the settings tab, check the link channels box and in the level detector area, adjust it's attack and release rate until it sounds good to you.
Then render a mixdown of the session, saving the result to a new audio file. Import that file into Premiere, add it to a new audio track in your original edit and mute the other audio tracks.   Render away.

TS3899 I have a problem with emails disappearing from my iphone. These are emails that I have put into folders to keep. When I go back to get them they are gone. Need help please.

I have had issues with my iphone deleting emails without my consent. It seems as if it doesn't want to hold onto emails for an extended amount of time. I use my iphone for all work related emails and personal. I have created folders to store important emails in related to work. I found when I need to retrieve those emails, they simply are not there. I was told to delete the email account from my iphone, then to add it back into phone. I have done this and things seem fine, then after a few days it no longer works. I have researched this topic and see that I am not the only one with this problem. From what I can find no one seems to have the answer. Please help?

Settings > Mail, Contacts, Calendars > Tap email account in question > nMail days to sync > extend the time

Having trouble with a audio file. Need help please!

Hello.
This may sound funny and not to related to any of this at first, but if anyone here knows about the game portal, then they know about the ARG that went on during last week and may even still be continuing. None of thats really important but if anyone cares to know, basically VALVe released a new update with 30 new sounds, 26 of them moarse code/sstv pictures. 3 of them called dinosaur_fizzle 1 2 and 3. Infact, each one was named dino_1 dino_2 and so on.
The main sound that no ones been able to crack is called Dinosaur_noise. Its obvious there are voices in it and its some sort of major clue, this file is way out of league with the other ones. No ones solved it 100% or cleaned it enough to make basically anything audible.
Now this started March 1st. Since then i have worked hours on the audio file. I have gotten close, but not close enough.
Thats why im turning to someone here, that can do a through analysis of the audio that adobe or reaper just cannot do.
In the attachments is the original file itself with no editing what so ever.
Heres some collected data.
Frequencies of interest
An analysis was undertaken to find the strongest frequencies acting within "dinosaur_noise". Linear and Logarithmic curves showed sets of dominant figures, with the most being:
Frequency (Hz)
Comments
9092
Largest spike before silence
7862
Very faint
7812
Very faint
7657
Very faint
7502
Largest spike in the 4000-9000Hz band
3502
various noise between 3502 and 3510
360
Another very visible wave. This was the most pronounced visible wave in the Logarithmic scale
35
The most dominant low frequency wave
There are a few standout segments, not of voice data underneath, but visible clicks or something happening about 5 times. These could be indications of splices or other manipulations going on. The largest noticed broad-spectrum spikes were:
Time(in samples)
Comments
55402
First broad spike
422931
Second broad spike
751643
Third broad spike
1081537
Fourth broad spike
1110841
Fifth broad spike
Silence in the frequency ranges is located in the band of 10.567 - 15.337 KHz. All frequencies above that are likely to be high frequency poinoning from the FFT process.
Heres what i know personally.
-Noise reduction makes it a lot worse and adds strange harmonics and artifacts.
-Most filters do the same.
-Clear voice around 15 that says THATS AMAZING.
If anyone cares to help I would appreciate it so much.
Here are some links that might help.
http://www.snotmonkey.com/work/school/405/methods.html
http://pastebin.com/r90fEtnd C++ code
Actual files in attachments
Attachments:
dinonoise.zip ‏2554 KB

LabVIEW has a sound and vibration toolkit. Do you have that? Do you have LabVIEW?
The forum is made up of volunteers who will help others with their LabVIEW problems. But you need to have a specific problem and ask clear questions.
What you are asking for is very unclear. Why do you even want to do a "thorough analysis of the audio"? No one is going to do your project for you.

TV signal gone after reset HELP please..

Since we got that major update on BT vision 3-4 months ago my vision has been near on useless. it freezes when watching freeview channels, wouldnt even load the catch up menus half the time, when I called and complained I was told it was because the update did something to my machine and it needed another update to fix it.. But when I called for an update of this Friday just gone I was told it was because my box needed a reset,
I done the reset, and got this error code VDR016 it then continutes to do the update succesfully, Well it says succesfully but now I have the most terrible signal on most channels, which I never had before the reset,
I have since reset it twice more, to be met with the same error before the installation finishes, and the same bad picture each time.. I have unplugged and replugged in all my cables incase one was caught at any time during me doing the reset, and still I have the same issue.
I would call BT over the phone, but im sick of being lied to and messed aroound, and spending hours at a time (Yes I literally mean hours) waiting for answers running tests and still being no further forward..
so has anyone got any ideas as to what I can try before I just cancel it and try sky again
My internet is running 75meg fibre optic, Vision box is hardwired to the router, and internet is running perfectly,

Try purging the channel list, not likely to solve the problem but you never know. Remove the aerial from the box and do a channel scan, which will clear it. Then replace the aerial and scan again.
You can click the white star next to this message if you think it was helpful.

Audio gone after Export to Final Cut Pro XML

Hi,
Whenever I export to XML, I can't keep working in Logic unless I Relaunch/Initialize CoreAudio. I get no audio playback otherwise. Logic works, just no meter deflection, sound, etc.
Is this a known bug or just my rig? Anyone else have this problem or is willing to try it?
Thanks, Randall
MDD DP 1.25, 2gig, LP721, 2xUad-1, RME Digiface, LC+XT's. Mac OS X (10.4.7)

It's a bit old, but I made this a while back:
http://www.keynoteuser.com/tips/finalcut.html

Audio not in sync - help please

This never happened before. I drag my Quicktime movie into the Assets tab and then into the editor. The audio and video are in sync for about the first 5 mins. of the half hour production, and then it goes out of sync. Can't understand it.
I made a new QT mov. and the video and audio tracks are exactly the same length. When I play the movie in the QT player it's fine all the way through. But in DVDSP I have the sync problem. Never did before.
What is going on? Any help appreciated!

Dear Sir,
When I look at my IPAD contents when it is connected via USB to my PC in the ITines Left Panel THe book shows with 2 greyed out circular small icons. When I look in my IPAD the book shows but it does not play.
I have tried 10 times syncing but the book just does not come on my IPAD and Play. The book is showing on my IPAD MUSIC-> More -> AudioBooks but it does not play
regards
Bikram

Parts of Audio Gone After Export

When I export my movie from FCE as a Quicktime Movie to be burned with iDVD, parts of the audio arent there. The whole movie plays back fine in FCE but as soon as its exported, theres missing audio. All of the audio is rendered so I'm not to sure what's going on. Is there any way to fix this?
Thanks

Did you Mixdown the audio? (First, Edit>Select all then Sequence>Render Only>Mixdown)
Do you have ALL your render options selected before you render?
Any MP3 files in the sequence?

Dv73060us connected to t v via HDMI Audio only from PC Help, please OS is Windows 7

I have connected my pc , using HDMI cable, to the TV, Everything seems to work well except for the fact that the audio is through the pc only. I went to control panel. hardware, sound and made the hdmi option the default.Audio still from pc only. Someone's help, please

wcrawf,
The brand of TV makes a difference sometmes... older Philips TVs in particular are fussy and have their own setup in the control panels (cannot recall where, this is from a thread from last ... Oct? I think I can find it if you need the info).
There is an "Order of Events" that needs to be followed; it is more important sometimes than others.
If the issue is a "simple one", then this may help as a "Check List":
Resolving HDMI Display and Sound Issues
Reprint of an earlier post - something here may work:
NOTE: If this does work, the "Hard Reset" rule applies - it should "stick", that is, you shouldn't have to do it this way each time - it's just a matter of getting it set up.
Order of Events - A "Hard Reset" of the HDMI Audio Setup:
Enable Digital Audio (S/PDIF)
Connect HDMI from computer toTV’s HDMI/DVI input port
Set your TV input to HDMI/DVI input. (You won’t have sound yet.)
Turn of the TV. Shut down the computer.
Boot the computer - wait for it to boot all the way. Log in.
Sound should be "dead" - no system sounds at this point.
All the audio should be going through the HDMI port.
If not, and you are getting sound, try setting "Digital Audio" setting (if you have it) as an option, [quote] "although this should not be necessary."
Remove any headphones and any other non-HDMI output from computer and Reboot.
If you get sound, it's still not ready - play with the sound output.
When you get it to the point where the sound is "dead" (while the HDMI port is still connected) after you reboot, you are ready.
Turn on the TV.
Check for Sound through the HDMI port. Should be working.
The FIX-ALL Link for HDMI:
I could take credit for this - but, you know - this is just not my area of expertise... Your solution may be here - almost everything that can happen to HDMI has happened to someone at some point. I've used this forum before - it's a great reference.
http://en.kioskea.net/forum/affich-79711-laptop-sound-on-tv-with-hdmi-cable
I hope this helps.
Kudos are Earned!
====================================================================================
Kind Regards,
Dragon-Fur

Green & Pink horizontal Lines? and Audio Sample Rate? Help, Please!

I have just successfully completed one short film. I'm believe I'm doing exactly the same as before but I'm running into problems. Used a Panasonic PV-GS300 camcorder with mini DV. Then a Sony DSR-11 deck. When I capture there are green and pink bars within horizontal lines over the image in the viewer. When I end the capture I get the message 'the audio sample rate of captured media files does not match the sample rate on you source tape. Video and audio out of sync.' The captured film clip audio rate is 48.0 KHz, the audio format is 16-bit integer, the audio is 2 Mono and the tracks are 1V 2A. Any suggestions, help would be greatly appreciated.
1.8 GHz Power PC G5, 2GB DDR SD RAM Mac OS X (10.4.9) FCP 5.1.4

Sorry about that, I'm away from my FC system, so I can't refer to it. You should choose DV-NTSC in Easy Setup as a starting point, then if the audio settings of your footage are different from 48kHz 16-bit, then you can easily change the capture settings to match.
tim

Sequence settings and export help please

It's been awhile since I've made a movie for dvd, and the last time was in PAL, so my settings are changed.
Now I'm making an NTSC dvd (Best quality possible) for a local historical group, and can't remember the settings!!
Using FCP 5
A Canon Elura 80 videocam, not HD, just ordinary DV.
I captured the video in iMovie and imported into FCP
Created 2 movies: one 4:3, and one 16:9 (filmed it in this format)
1. What 'export movie' settings do I need? Should I export as a QT movie, use DV Stream, or ?
I want to use iDVD to make the dvd, and I'd like it the best quality possible
2. Also, my 'sequence presets' seem different. They're Apple ProRes 422 (HQ) 1280x720 30p 48 kHz. IS this what they should be?
(And I'm far from being a pro,, I just like to have better control than iMovie gives me; i'ld just like to set my settings and leave them for everything i do .... or at least know what they all mean so I can make a decision which to use
Thank you
Elizabeth

I captured the video in iMovie and imported into FCP
Bad step there ... you should capture in the NLE you plan to use for editing. FWIW, iMovie captures DV different than FCE or FCP. You my have lost so quality there, but it depends on which version of iMovie you used.
1. What 'export movie' settings do I need? Should I export as a QT movie, use DV Stream, or ?
File->Export->QuickTime Movie. Do NOT recompress all frames, but do include chapter markers (if needed). You can make the movie self-contained or not. Drop the resulting file into iDVD.
2. Also, my 'sequence presets' seem different. They're Apple ProRes 422 (HQ) 1280x720 30p 48 kHz. IS this what they should be?
No, not if you shot and captured DV.
-DH

Exporting Help Please

Alright im really new to macs and imovie hd. I want to export my movie ive made into quicktime format and want it to be a little under 100mb cause i want to upload it to youtube. Now i want good qaulity video and sound. How to you go about setting stuff right in the expert mode

Look here, hisname...
http://karsten.schluter.googlepages.com/youtubeuploadsettings
:)Sue

My screen has gone black! Help please!

Yesterday, I picked my phone up off my desk and the screen had gone completely black. My phones screen is cracked, but has been for the last ten months and functioned properly. This has happened before but it seemed to turn back on after ten minuets or so. I put my phone on charge overnight to see if it would have changed by the morning. I find myself with my next problem of being unable to deactivate my alams as I cannot dismiss them. I have read other discussions and tried to reset my phone, I have done this several times without anything working. However, now when I put it on charge, every ten seconds the noise to signal that the phone is charging keeps going off!

Hello Morgster_10,
I would recommend seeking service for the device. Further information and arrangements can be made at the following link.
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&product=iphone
Cheers,
Allen

I purchased some Karaoke songs from Itunes store, but I need to know which type of disk to burn to so that I get the words also. I tried burning on a CD-R but when put in Karaoke machine I only get the audio. Can anyone help please?

I purchases some karaoke songs from itunes store, but cannot get them to burn onto a cd with the words. What must I do to be able use my purchase in a karaoke machine so I can see the wrds on screen as well as hear the audio?

Vincy28 wrote:
I purchases some karaoke songs from itunes store,
The tracks labeled "karaoke" in the iTunes Store are only instrumental backing tracks; they are not actual karaoke tracks. They do not have lyrics, and cannot be burned to the usual CD+G format that a karaoke machine will accept.
If you want actual karaoke tracks, go to a specialty online download store such as KaraokeDownloads.com.

Audio gone on export- help please!

Similar Messages

Maybe you are looking for