Audio Hardware Setup

Hello,
I am trying to use Audition 3 and I am encountering great difficulty configuring my audio hardware. I have recorded successfully on Cool Edit 2 very recently, so I am certain that my equipment is wired correctly and functional.
I am running an M-Audio Preusb on Windows 7 Home Premium. I am not sure which soundcard to use and I have experimented with both the M-Audio USB ASIO as well as the ASIO4All with unsatisfactory results.
When I use ASIO4All there is no sound recorded, but this is the only audio driver which allows me to even get that far.
When I try to use the M-Audio I get this screen but I am not sure what it means.
I have my sample rate set to 512 in the ASIO control panel but apparently messing with the slider doesn't make a difference as I get the same pop up no matter what.
I try to switch USB ports and get this pop up:
I am clueless about what to do at this point and I would appreciate any advice given.
Thank you.

Not too sure if I can help. I'm having a fair bit of trouble trying to record also, but if you have an asio driver on your system you may have to put this in your windows system32 or 64 folder (depending on your OS). The asio driver should tell you what to do. When I had done this, I clicked on the icon for this asio driver and the configuration box came up and I had to highlight what I wanted to use .
I now have my sound back but can't monitor what I'm recording.
Welcome to the user friendly AA3 nightmare.

Similar Messages

AA3 keeps losing Audio Hardware Setup settings...

I work in a broadcast center with a number of AA3 machines that keep losing their Audio Hardware Setup settings. It keeps switching from the LynxONE drivers to Audition 3.0 Windows Sound. I can find no documentation on this.
I've found that the trigger is when AA3 has "release ASIO driver in background" NOT checked, and the user minimizes it and plays something from another audio program. Then they have to go in and set it back again before AA3 will pass audio again.
Is there any way to prevent this from happening?
Thanks.

In the Options menu. Device Properties. Then you have tabs for Wave In and Wave Out amongst others. Also you may need to also set Device Order from the same Options menu.

Audio Hardware Setup freezes Audition

Hello! I've been using Audition 3.0 with a 64-bit Windows 7 machine for quite a while but suddenly whenever I want to open Audio Hardware Setup menu the spinning circle appears and Audition stops working.
I've wracked my brain to think of what might have changed but I'm still using the same audio device that I've always used (Edirol UA-101 primarily). Does anyone have any ideas? I'd be grateful if something comes to mind. Thank you!

Just a long shot. Have you tried shrinking Audition to the task bar to see if another small Windows popup was hidden behind it with some info about your audio hardware?

Audio Hardware Setup problem

Hello everyone, heres another mystery. Recently I had to uninstall my sound card driver( I use a Asus Xonar D1 Audio). After downloading it again I cant get Adobe to work. The problem is I cant get both speakers to play. When I go to the audio hardware setup in Adobe, I get this in the output box:
Stereo: L,Ls,C,Lb
or
Mono:L,R,Ls,Rs,C,Sub,Lb,Rb
I can only select one of the options and therefore only one speaker works. If I select L, then I only get sound from the left speaker, R-right speaker etc.
Can anyone help?
Thanks

First I did what you said and it didnt work, so i played around whith the inputs and outputs in ASIO4ALL and then I tried your way again and...oh yeah.
Man you just made my day...well...evening(my day was full of stress) and if I could, I would get you a beer
Thanks man

Any perfect audio hardware setup with the new Macbook Pro?

I'm still not sure if to go for the new Macbook Pro 2.8 ghz, or the 6 months earlier 2.5 ghz model (march 2008).
I love to go for the new Macbook Pro, but I'm not sure about my setup. Now I have:
- extern 7200 rpm bus powered LaCie firewire 800 hard drive
- Saffire with firewire 400 (thinking about moving to Apogee Duet)
Will the express card really help? I've read that if you connect a firewire 400 device to the express card, the firewire 800 won't work at 800 speed, but at 400? Also that a bus powered hard drive doesn't work, and that it needs it's own power to run with the express card?
Bottom line:
What would be the perfect audio hardware setup with the new Macbook Pro? I gladly invest in a different audio interface (or anything else) if it really fits and works as pro audio setup!

I've read that if you connect a firewire 400 device to the express card, the firewire 800 won't work at 800 speed, but at 400?
I don't think this is right. As I understand it, the advantage of having one of your devices on an express card slot is specifically so it is on its own bus.
Then both devices will operate on their own speed.
However, this is true for the older model Macbook Pros when you use both FW ports that are built in, because even though the machine has two ports, they each feed one firewire bus. So if you have a device plugged into each port, the one plugged into the 800 will only run at 400 speed because they're both on the same bus. Using an express card means both devices can operate at their own speed.
If you want the newer machine I think you should get it. Then you can buy a firewire 400 express card, plug your interface into that, and plug your FW 800 drive into the main firewire port. This will give you better performance from your peripherals than an older machine with both devices plugged into the built in FW ports.
Good Luck!

Imac 10.8.4 Audio Hardware Setup

Dear all
I am trying to connect an external mic (AKG C 2000 B) to the new imac 2013 with osx 10.8.4
I have:
1. XLR cable.
2. Apple Fire wire to thunderbolt adapter.
3. 400 to 800 Fire wire cable.
4. M audio Firewire 410 (no drivers for 10.8.4).
5. M audio Audio Buddy dual mic preamp direct box. (+ power supply) (http://www.m-audio.com/products/en_us/AudioBuddy.html)
My plan was to use the firewire 410 but alas there are no working drivers for 10.8.4
Can anyone suggest the best way to connect the mic to the mac using the stuff above ...
Are there any jack to firewire adapters/converters that would alow me to use the Audio buddy instead?
All suggestions would be most welcome
Thanks
Aidan

Hi Aidan,
Sad about the FW demotion in OSX.
I can't for he life of me find what kind of connection the AKG C 2000 B uses, would an iMac at least allow it's use on the Mac?
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

Adobe Audition 3.0 "Audio Hardware Settings" for USB Audio Interface HELP!

Hi guys.
I’m after some help in the internal settings of Adobe Audition 3.0 whilst I’m trying to run my condenser mic through my ART USB Dual Pre.
I have the USB Dual Pre all set up in my Windows 7 set up (it automatically becomes the default recording device when it’s plugged in), phantom power enabled, XLR cable plugged into the right socket of the two available (is there any difference? I’m just recording voice tracking for radio announcements), headphones plugged into the monitoring jack at the back. Levels are turned up enough that they will pick up the noise, if there was any.
I go to the “edit” tab in Adobe Audition 3.0, hit record and nothing comes up. I’m not getting any sound at all registered on the computer. I’ve downloaded and installed Asio4All, but can’t for the life of me figure out the configuration within the “Edit > Audio Hardware Setup” to make the damn thing pick up my voice. There’s mention of Audio Drivers (Asio4All or Audition 3.0 Windows Sound), USB Audio Codecs, Input/Output… it’s enough to make a man who’s not very good at this sort of thing cry (ie. Me).
Could anybody help a body out, please? I think I’ve done everything right except the configuration within Audition itself. A helping hand would be GREATLY appreciated.
Thanks so much!

Hey there,
Thanks for your reply! I'm not too good at describing what I'm doing, so I've taken screenshots of all the options in "Edit > Audio Hardware Settings" under Edit View and Multitrack view. They include both Audio Drivers available (which were Asio4All and Audition 3.0 Windows Sound) and the associated Default Input/Output options, as well as the Audio Driver control panels and the options that were checked/unchecked on them.
If anybody could tell me how to configure this so I can actually record from my USB Dual Pre, that would be one better than I can do!
Thanks heaps.

Kawai CN41 electric piano will not show up in Audio MIDI Setup.

Hello,
I have a Kawai CN41 Piano that I would like to connect to my Macbook via USB to control some midi functions in Logic Express (incredible software by the way...)
The Manual that came with the piano says that it should just work. But for maximum clarification, I'll retype what the manual says.
"The CN41 piano can be connected with a personal computer with a USB cable for excahanging MIDI data. You need a USB Driver installed in your computer.
[For Windows XP/ME users]
A standard USB driver is already installed in your computer. You don't need to install a new driver.
[For Windows 2000/98SE users]
You need to install the desigated driver in your computer. Visit the KAWAI website at http:/www.kawai.co.jp/english/Download1.html and download the program.
[For Macintosh users]
Macintosh OSX automatically recognizes our USB interface. No Special driver is needed. Older Macintosh OS are not supported by us. If you have an older Macintosh OS, please us an appropriate MIDI interface and MIDI cables when connecting the CN41 piano to a macintosh computer.
NOTE:
When both MIDI jacks and USB port are connected, USB has priority.
When connecting USB cable to the CN41 piano, first connect the USB cable and then turn the power of the CN41 piano on.
It may take some time to start communication when the CN41 piano is connected to the computer via USB. When USB communication is unstable with connection via hub, connect the USB cable directly to the USB port of the computer.
Turning the power of CN41 piano on/off or disconnecting the USB cable while the follwing actions may cause unstable communication.
while installing USB driver
while booting up the computer
while MIDI application is working
while communicating with the computer
while the computer is in energy saver mode
* If you have any problem with USB communication, consult the instruction manual of your computer and check your computer setup.
* The USB-MIDI conversion board TID10000934 used in the CN41 piano is approved to show the USB logo. The USB logo can be used only for the product which is approved by USB-IF (USB Implements Fourm Inc.) test.
* Windows is registered trademark of Microsoft Corporation.
* Macintosh is registered trademark of Apple Computer, Inc."
So when i follow the directions just like the manual says the only thing that happens is my mouse stops working for about 30 to 45 seconds. After it starts working, nothing whatsoever in the department of MIDI. It won't even show up in the Audio MIDI Setup application. Also, I'm not 100% positive about this, but I don't think it's showing up in the System Profiler as well.
I've tried pushing the rescan button in Audio MIDI Setup, nothing.
I've repeated everything with a different usb cable with no improvement.
And I even contacted Kawai Technical Support. The guy I talked to via email said that he wasn't a mac guy but he'd ask his friends who were if they had any problems, his friends told him that everything was working fine for them. Then he told me to go and buy a USB-MIDI interface and plug it into the traditional MIDI ports on the CN41 and see if that would work. (I really don't want to do that, one of the reasons I bought this piano is the midi-straight-to-computer-via-usb-cable-connection connection. Buying a little usb interface would defeat the point. Although, I'll probably buy one down the road eventually. I would just like it to work.)
This piano is really nice, It has keys that feel like the real thing and using it to write some tracks in Logic Express would be a delight if it would work. If I could, I would take this issue to the Apple store in Salt Lake City, but I'm thinking that I would also have to take the piano and its kinda big. I'm using a Macbook running OS X Leopard 10.5.4 with a 2 GHz Intel Core 2 Duo processor and 2 Gigs of ram. I also run a Line 6 Toneport UX2, I'm not sure if there could be any Hardware conflicts, but I'm not much of a computer guy so I figured I'd just let you know as much as I can.
Aside from this thing with the piano, OSX has worked beautifully! I will never buy a Windows running machine again. And the few times when I'm forced to use one, (Work and stuff) I get really cranky.
Thank you for your time,
Jon Worms
P.S. I'm more than willing to scan the manual and email it for you upon request, I tried to find a link to it somewhere with no luck. But you know, thats just my luck. :P

Hey Rob, Thanks for responding!
As far as I can see there is not. The piano does have 3 usb ports on it though. 2 A size ports to go to Kawai approved devices, such as a hard drive for recording directly to portable memory. These plugs are labeled USB to Device. Then it has one B size plug that is Labeled USB to Host. The manual says that this is the one to connect to the computer.
USB Controls do exist though. But manual states that they are for when you plug in a small hard drive/flash drive. The controls allow you to create new folders and move recordings around on a flash drive. And without a hard drive plugged into one of the A size ports I don't get anything but an error message.
Tomorrow I'm going to try and get it to work on a windows box. Maybe i'll have a little luck.
Thanks for your help.

How can I get my audio input and output devices back? I have no sound and cannot see any of the devices in Audio MIDI Setup..??

Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
Thanks in advance for any help anyone can give me!

In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

How to set audio hardware input channels for narration & to what?

Searched forum - hope I didn't miss solution for the following:
Using PE3 in Windows XPSP3
Tried for the first time to add narration to a project. Was using a stereo/microphone headset. Got nothing but noise. Could record in Windows recorder and Audacity. However, the microphone as part of the set would not work in Windows Audio Hardware Test Wizard. The set was using a sound chip on the motherboard.
A friend of mine has the same OS, motherboard and is using PE3. He too had never tried adding narration - but tried with a USP connected set, and was successful.
I removed my stereo set, and connected a USB set. To make sure all settings were reset, I did a cold reboot. The USB set worked in Windows Audio Test Wizard. I opened my project again, and in Edit/Preferences/Audio Hardware, clicked AIIO Settings. Unchecked the old set (Realtek) in both the Output and Input Ports area, checked the USB Audio Device, moved to the top of both lists.
Then tried to add narration and got the error message "Your current audio hardware selection does not have any input channels. Please use Preferences>Audio Hardware to correct this problem.
Thinking that maybe this was a preset for the project and couldn't be changed, I started a new project, no video, just tried to add narration, and got the same message.
The entries in the columns in the ASIO Direct Sound for Full Duplex Setup menu for the USB Audio Device in the Input section are: 2048, 0, 1, 16, Yes
The only one of these that seems to be able to be adjusted is the second number - the Offset (Samples). The Audio Channels number is set to 1 and doesn't seem to be changeable. Suggestions?

When working with Audio in most NLE's, i.e. Premiere Elements, or Pro, there are basically three areas that can affect how the Audio is handled on one's system. First, there is the Sound settings in Windows (from Control Panel). Next, the Audio card/chip probably/possibly has a console to make settings at the card/chip level. Last, and these are really two locations, but I'm only counting them as one since they are both in the NLE - Edit>Preferences>Audio & Audio Hardware. This is where Steve is referring to. Check all settings, and I'd suggest doing so in the order that I listed them above: OS, Audio card, then Premiere. A Mute, or by-pass in the first two, can override the settings in Premiere, and you may have its setting correct, but still not be able to effectively use your hardware.
The exact settings chosen will depend on the exact hardware that is properly installed. Without knowing all of your hardware and other settings elsewhere, one cannot give you a definitive answer. Ideally, in the settings drop-downs, you *should* see your hardware listed. Look closely, as these can be a bit cryptic.
If you are still unable to get your hardware working properly, a fourth place to look would be Control Panel>System>Hardware>Device Manager for your Audio hardware. Check that Device Manager sees your hardware, and that it is working properly.
If all is set up properly, but still not working, report back with exact specs on your system, including all of your Audio hardware. There are possibly some more steps that can be taken. I will not mention them now, as they *should not* be needed. If you do need further assistance, please list every option in all of the drop-down lists from Premiere, so we can know what your choices are.
Good luck,
Hunt

Audio Midi Setup - Configure to enable line-in "thru"

Hello,
I have an external audio device connected to my iMac via the line-in interface. I would like to be able to listen to this device without having to start an audio editing application.
I noticed in the "Audio MIDI Setup" under the "Audio Devices" tab, there are checkboxes at the bottom for "Volume Slider" for Mute and Thru.
I have read on various forums that you can click "Thru" and the line-in audio will passthru so you can hear it with your speakers. The only problem is those checkboxes are greyed out.
Is there a way to check the "Thru" option? Why is it greyed out for the Channel "Master"? Is there a way to force this by adding an item in the plist file for the coreaudio setup?
If you can open up an application and hear the "line in" audio, then why can't you enable it by default so the line-in is always playing through?
Thanks in advance for any responses.
-Rich
iMac G5 20" Mac OS X (10.4.7)

I think the "Thru" button is for external audio devices that have a hardware play-through option.
To listen to line in, use LineIn from:
<http://rogueamoeba.com/freebies/>

Audio Midi Setup, multichannel speakers, Snow Leopard & possible bug

I scoured this forum as well as the usual places across the net and haven't seen any mention of this issue, thought I'd post it here and see if anyone else has had this issue. I'm having a problem with a fresh install of 10.6.2 that I detailed in a bug report to Apple. Here's what I sent them:
"I have a firewire audio interface I use successfully with Logic Pro/Quicktime Pro 7/Finder in a multichannel (5.1) configuration for scoring and post, which works fine in 10.5.8. I can play multichannel (interleaved) 5.1 files bounced out of Logic Pro in Quicktime Pro and from within the Finder using QuickLook, and all channels play out of the speakers (which is of course configured properly in both Audio Midi Setup and Logic Pro).
In the latest version of Snow Leopard however, even though multichannel audio works fine in Logic Pro (probably because it has its own multichannel speaker config in Logic's audio preferences), this same hardware setup does not work outside of Logic. Multichannel audio files only play out of the left & right channels (C/LFE/Ls/Rs are summed). I believe the problem is Audio Midi Setup. Even though I enable the correct stream and choose the correct speakers from with "speaker configuration," and even though the test tone buttons work over the appropriate speakers in that window, after I hit "apply," when playing multichannel audio files in QT7 or via Quicklook in the Finder, the problem persists (summing all channels to L & R speakers).
Furthermore, when I click "Done" in the speaker config window and quit Audio Midi Setup and re-open it, the speaker configuration window reveals that my multichannel setup has reverted to Audio Midi Setup's intial state: a 2 channel (stereo) setup. I've done this at least ten times, as well as having deleted the AMS prefs and launched the utility in 32-bit mode with no success."
Has anyone else with a multi-speaker setup had any problems with AMS initializing their speaker configuration, and just plain not working?

Brent Daniels [Free] wrote:
... I believe the problem is Audio Midi Setup. Even though I enable the correct stream and choose the correct speakers from with "speaker configuration," and even though the test tone buttons work over the appropriate speakers in that window, after I hit "apply," when playing multichannel audio files in QT7 or via Quicklook in the Finder, the problem persists (summing all channels to L & R speakers).
Furthermore, when I click "Done" in the speaker config window and quit Audio Midi Setup and re-open it, the speaker configuration window reveals that my multichannel setup has reverted to Audio Midi Setup's intial state: a 2 channel (stereo) setup. I've done this at least ten times, as well as having deleted the AMS prefs and launched the utility in 32-bit mode with no success."
Has anyone else with a multi-speaker setup had any problems with AMS initializing their speaker configuration, and just plain not working?
I don't know if this will help you, but I once had a problem with Audio Midi Setup forgetting its settings - I found that the settings were only securely stored if I made the changes while logged on as an administrator.

Reloading Audio MIDI Setup (AMS) settings

Hello all, I recently had to reinstall a fresh copy of OS X onto my system but I did make a backup of my hard drive before hand. Is it possible to reload my old Audio MIDI Setup (AMS) settings from my backup hard drive? If so, where might I find that file? Thanks
G5 2.5 Mac OS X (10.4.8)

More specifically, SL has broken something with regard to AMS!
I'm a film composer using LOTS of hardware MIDI devices (in addition to my soft-synth array). Yes, hardware still exists, and serves a vital/professional purpose. I've got 6 MOTU MTP-AV interfaces (all USB) and they all connect their individual MIDI ports to individual MIDI devices.
In all versions of OSX (pre SL), AMS would retain my graphic layout of my studio. Now, no matter what I do now, AMS insists upon snapping the entire hardware footprint along the top portion of my AMS screen. Completely useless and arcane!
All versions of AMS were bad enough (a step backwards from MOTU's OS9 FreeMIDI), but this is truly ridiculous.
Are we all giving up on hardware/professional synths??? Can this be fixed???

I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet. Do I have any options? Thanks!

Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!

OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc.

Audio Hardware Setup

Similar Messages

Maybe you are looking for